mptsas: %s: Can't locate host! (sc=%p)
<3>mptsas: %s: Wrong bus type (sc=%p)
<4>mptsas: %s: WARNING - : %s: ioc is in reset,SML need to reset the timer (sc=%p)
<4>mptsas: %s: WARNING - : %s: target removed or in device removal delay (sc=%p)
<7>mptsas: %s: sas_rphy_add: rphy=%p
<7>mptsas: %s: rphy=%p release=%p
<7>mptsas: %s: %s: kfree (fw_event=0x%p)
<3>mptsas: %s: ERROR - slave_alloc kzalloc(%zd) FAILED!
/builddir/build/BUILD/kernel-2.6.32-696.20.1.el6/linux-2.6.32-696.20.1.el6.x86_64/arch/x86/include/asm/dma-mapping.h <7>mptsas: %s: ---- SAS DEVICE PAGE 0 ---------
<7>mptsas: %s: Parent Handle=0x%X
<7>mptsas: %s: Enclosure Handle=0x%X
<7>mptsas: %s: SAS Address=0x%llX
<7>mptsas: %s: Target ID=0x%X
<7>mptsas: %s: Parent Phy Num=0x%X
<7>mptsas: %s: Access Status=0x%X
<7>mptsas: %s: Device Info=0x%X
<7>mptsas: %s: Physical Port=0x%X
<7>mptsas: %s: %s: [%p]: deleting phy = %d
mptsas: %s: delete phy %d, phy-obj (0x%p)
<7>mptsas: %s: phy_id=%d sas_address=0x%018llX
<7>mptsas: %s: Forming port
phy_id=%d sas_address=0x%018llX
<7>mptsas: %s: phy_id=%d sas_address=0x%018llX
<7>mptsas: %s: %s: [%p]: phy_id=%02d num_phys=%02d bitmask=0x%016llX
<7>mptsas: %s: port = %p rphy=%p
<3>mptsas: %s: ERROR - %s: exit at line=%d
<3>mptsas: %s: ERROR - %s: fw_id=%d exit at line=%d
<6>mptsas: %s: attaching %s device: fw_channel %d, fw_id %d, phy %d, sas_addr 0x%llx
<7>mptsas: %s: %s: removing target reset for id=%d
<7>mptsas: %s: %s: add (fw_event=0x%p)on cpuid %d
<4>mptsas: %s: WARNING - %s: failed at (line=%d)
<7>mptsas: %s: %s: MPT_IOC_SETUP_RESET
<7>mptsas: %s: %s: MPT_IOC_PRE_RESET
<7>mptsas: %s: %s: MPT_IOC_POST_RESET
<4>mptsas: %s: WARNING - %s, no msg frames @%d!!
<7>mptsas: %s: TaskMgmt request (mf=%p)
<7>mptsas: %s: TaskMgmt type=%d (sas device delete) fw_channel = %d fw_id = %d)
<4>mptsas: %s: WARNING - %s, failed to allocate mem @%d..!!
LSI debug LogInfo (0x%x) available for INTERNAL_DEVICE_RESETfw_id %d fw_channel %d
<6>Skipping Raid Volume for inDMD
<6>Setting device flag inDMD
<7>mptsas: %s: TaskMgmt completed: (mf = %p, mr = %p)
<7>mptsas: %s: TaskMgmt completed: fw_channel = %d, fw_id = %d,
task_type = 0x%02X, iocstatus = 0x%04X loginfo = 0x%08X,
response_code = 0x%02X, term_cmnds = %d
<7>mptsas: %s: TaskMgmt: completed (%d seconds)
<4>mptsas: %s: WARNING - TaskMgmt request: no msg frames!!
<7>mptsas: %s: TaskMgmt request: mr = %p, task_type = 0x%02X,
timeout = %ld, fw_channel = %d, fw_id = %d, lun = %lld,
task_context = 0x%x
<3>mptsas: %s: ERROR - TaskMgmt request: TIMED OUT!(mr=%p)
<7>mptsas: %s: TaskMgmt request: failed with no reply
<6>mptsas: %s: %s: IOCStatus=0x%X IOCLogInfo=0x%X
mptsas: %s: delete device: fw_channel %d, fw_id %d, phy %d, sas_addr 0x%llx
<7>mptsas: %s: ---- SAS PHY PAGE 1 ------------
<7>mptsas: %s: Invalid Dword Count=0x%x
<7>mptsas: %s: Running Disparity Error Count=0x%x
<7>mptsas: %s: Loss Dword Synch Count=0x%x
<7>mptsas: %s: PHY Reset Problem Count=0x%x
<7>mptsas: %s: %s: [%p]: num_phys=%02d bitmask=0x%016llX
<6>mptsas: %s: IOC is in Target mode
mptsas: %s: removing %s device: fw_channel %d, fw_id %d, phy %d,sas_addr 0x%llx
mptsas: %s: delete port %d, sas_addr (0x%llx)
<6>mptsas: %s: delete expander: num_phys %d, sas_addr (0x%llx)
<3>mptsas: %s: ERROR - %s: the smp response space is missing
<3>mptsas: %s: ERROR - %s: multiple segments req %u %u, rsp %u %u
<3>mptsas: %s: ERROR - %s: smp passthru reply failed to be returned
<7>mptsas: %s: port=%p release=%p
mptsas: %s: add port %d, sas_addr (0x%llx)
<7>mptsas: %s: sas_port_add_phy: phy_id=%d
mptsas: %s: add phy %d, phy-obj (0x%p)
<6>mptsas: %s: %s: host reset in progress!
drivers/message/fusion/mptsas.c <3>Memory allocation failure at %s:%d/%s()!
<6>Device returned, unsetting inDMD
<7>mptsas: %s: ---- SAS EXPANDER PAGE 1 ------------
<7>mptsas: %s: Physical Port=0x%X
<7>mptsas: %s: PHY Identifier=0x%X
<7>mptsas: %s: Negotiated Link Rate=0x%X
<7>mptsas: %s: Programmed Link Rate=0x%X
<7>mptsas: %s: Hardware Link Rate=0x%X
<7>mptsas: %s: Owner Device Handle=0x%X
<7>mptsas: %s: Attached Device Handle=0x%X
<6>mptsas: %s: add expander: num_phys %d, sas_addr (0x%llx)
<7>mptsas: %s: ---- IO UNIT PAGE 0 ------------
<7>mptsas: %s: Controller Handle=0x%X
<7>mptsas: %s: Port Flags=0x%X
<7>mptsas: %s: PHY Flags=0x%X
<7>mptsas: %s: Controller PHY Device Info=0x%X
<7>mptsas: %s: DiscoveryStatus=0x%X
<7>mptsas: %s: ---- SAS PHY PAGE 0 ------------
<7>mptsas: %s: Attached Device Handle=0x%X
<7>mptsas: %s: Attached PHY Identifier=0x%X
<7>mptsas: %s: Attached Device Info=0x%X
<7>mptsas: %s: Change Count=0x%X
<7>mptsas: %s: PHY Info=0x%X
<6>mptsas: %s: attaching raid volume, channel %d, id %d
<4>mptsas: %s: WARNING - Skipping because it's not operational!
<4>mptsas: %s: WARNING - Skipping because it's disabled!
<4>mptsas: %s: WARNING - Skipping ioc=%p because SCSI Initiator mode is NOT enabled!
<4>mptsas: %s: WARNING - Unable to register controller with SCSI subsystem
<7>mptsas: %s: Resetting sg_tablesize to %d from %d
<6>mptsas: %s: Invalid value passed formpt_loadtime_max_sectors %d.Range from 64 to 8192
<7>mptsas: %s: Resetting max sector to %d from %d
<7>mptsas: %s: ScsiLookup @ %p
<3>mptsas: %s: ERROR - scsi_add_host failed
<4>mptsas: %s: WARNING - firmware bug: unable to add hidden disk - target_id matchs volume_id
<7>mptsas: %s: %s %d SATA HOT PLUG: parent handle of device %x
<3>mptsas: %s: ERROR - %s %d port info is NULL
<3>mptsas: %s: ERROR - %s %d phy info is NULL
mptsas: %s: RAID Hidding: fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx
mptsas: %s: RAID Exposing: fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx
<6>mptsas: %s: removing raid volume, channel %d, id %d
<7>mptsas: %s: Entering %s: ReasonCode=%02x
<7>mptsas: %s: %s: rescan ignored as it is in progress
<7>mptsas: %s: %s: rescan after reset
<7>mptsas: %s: %s: exiting due to a parallel reset
<7>mptsas: %s: %s: exiting due to reset
<7>mptsas: %s: %s: Config page retry exceeded retry count deleting device 0x%llx
<7>mptsas: %s: %s: fw_event=(0x%p), event = (0x%02x)
<7>mptsas: %s: %s: reschedule task (fw_event=0x%p)on cpuid %d
<7>mptsas: %s: %s - exit, query_count = %d termination_count = %d
<4>mptsas: %s: WARNING - Issuing Reset from %s!! doorbell=0x%08x
Link down for fw_id %d:fw_channel %d
strange observation, the queue depth is (%d) meanwhile fw queue depth (%d)
Tagged Command Queueing is being disabled
mptsas: %s: add: <7> <7>mptsas: %s: Handle=0x%X
<7>mptsas: %s: Slot=0x%X
<7>mptsas: %s: Bus=0x%X
<7>mptsas: %s: Flags=0x%X
ssp stp sata 3.04.20 Fusion MPT SAS Host driver <6>%s %s
mptscsih_io_done mptscsih_taskmgmt_complete mptscsih_scandv_complete mptsas_mgmt_done mptsas_taskmgmt_complete mptsas <6> initiator clearing deleted flag
<7>mptsas: %s: Port=0x%X
&ioc->sas_topology_mutex &ioc->sas_discovery_mutex &ioc->sas_mgmt.mutex &ioc->sas_device_info_mutex <7>mptsas: %s: %s - enter
SDEV OUTSTANDING CMDS%d
Queue depth reduced to (%d)
Queue depth not changed yet
MPT SAS Host . . . ! T X
{
: parm=mpt_loadtime_max_sectors: Maximum sector define for Host Bus Adaptor.Range 64 to 8192 default=8192 parmtype=mpt_loadtime_max_sectors:int parm=max_lun: max lun, default=16895 parmtype=max_lun:int parm=mpt_pt_clear: Clear persistency table: enable=1 (default=MPTSCSIH_PT_CLEAR=0) parmtype=mpt_pt_clear:int version=3.04.20 license=GPL description=Fusion MPT SAS Host driver author=LSI Corporation srcversion=20A1DB3FEBBEFC6C77D834E alias=pci:v00001000d00000059sv*sd*bc*sc*i* alias=pci:v00001000d00000062sv*sd*bc*sc*i* alias=pci:v00001000d00000058sv*sd*bc*sc*i* alias=pci:v00001000d00000056sv*sd*bc*sc*i* alias=pci:v00001000d00000054sv*sd*bc*sc*i* alias=pci:v00001000d00000050sv*sd*bc*sc*i* depends=scsi_transport_sas,mptscsih,mptbase vermagic=2.6.32-696.20.1.el6.x86_64 SMP mod_unload modversions ` ( y 8 @ H P ` h p > ( 0 8 l @ H L P X = ` h
p B x
} 5 Y M# % ' ' r) ^+ B, . ( / 0 1 8 3 @ 5 H 8 P > X H ` M h N p R x .V UW ` c ]i r u 5w @#R module_layout \4Z __kmalloc N- sas_release_transport cj scsi_host_alloc ?< mptscsih_get_scsi_lookup U* scsi_track_queue_full n?; mptscsih_dev_attrs i param_get_int 4/I scsi_add_host_with_dma } scsi_remove_device mpt_set_taskmgmt_in_progress_flag { dev_printk 2 sas_phy_add ^g mptscsih_abort ͈ mptscsih_info ˑ malloc_sizes $B mpt_reset_register mpt_attach a mptscsih_dev_reset `j` sas_port_add_phy 7d mpt_get_msg_frame G6 x86_dma_fallback_dev n; sas_rphy_free &j init_timer_key u mutex_unlock E sas_port_delete_phy lI sas_rphy_add %K param_set_int *q _spin_lock_irqsave jCZ mptscsih_change_queue_depth c* scsi_print_command CT mptscsih_slave_destroy h} jiffies C __list_add b sas_port_delete __init_waitqueue_head jH) per_cpu__cpu_number "d sas_attach_transport ! scsi_is_host_device del_timer_sync b@ scsi_internal_device_block SD mpt_raid_phys_disk_get_num_paths
cj sas_expander_alloc ceh mptscsih_suspend : sas_read_port_mode_page p7 jiffies_to_msecs 5QM mutex_lock_interruptible 5 sas_end_device_alloc 9K __mutex_init cs printk tXw mpt_raid_phys_disk_pg0 . mpt_event_register a%| mptscsih_raid_id_to_num ~ strncpy 9 mcount Y, mptscsih_resume ) sas_port_mark_backlink R0 warn_slowpath_null mutex_lock m per_cpu__kernel_stack |D+C sas_port_add [D! list_del T.f mptscsih_scandv_complete yK _spin_unlock_irqrestore ; mptscsih_taskmgmt_response_code CW mpt_findImVolumes p! 3 scsi_device_put (&E mpt_event_deregister 3 mpt_register * sas_phy_free NOvx pv_irq_ops . mpt_put_msg_frame f scsi_add_device U܈ queue_delayed_work_on __stack_chk_fail ; msecs_to_jiffies g starget_for_each_device ܃ device_reprobe {b scsi_device_lookup 5 sas_phy_alloc I mpt_Soft_Hard_ResetHandler f& mpt_GetIocState 5h pci_unregister_driver Q mptbase_sas_persist_operation D kmem_cache_alloc_trace V scsi_is_sas_rphy G) __phys_addr w. sas_remove_host FM mptscsih_host_reset
{ __scsi_iterate_devices dW mptscsih_proc_info *! int_to_scsilun s mpt_raid_phys_disk_pg1 z kfree dl# memcpy NTַ sas_port_alloc_num scsi_internal_device_unblock q mptscsih_is_phys_disk _ __pci_register_driver }F mptscsih_remove :V complete $T mpt_free_msg_frame g} mptscsih_ioc_reset G$ mptscsih_taskmgmt_complete = > wait_for_completion_timeout GL mpt_config t~ mptscsih_slave_configure ɾ mptscsih_io_done <
dev_get_drvdata A Y X Z n @d
g ( $ l \ 8
G v
^
m y o
@
`
h & ( 5
` Z & j ~ ( (
y T P (
' 2 A R x X e o # ` + + + + ` + + , @
$
4 4
C
g
r
& A T g 0 u ~ 0# U w # : I \ s A
6
D
W
f
~
" 9 K k
4 G ^ e r P / " = L ` u ) 6 J W f t ` ( 4 ? a t mptsas.c mptsas_parse_device_info mptsas_exit mptsas_driver mptsas_transport_template mptsasDoneCtx mptsasMgmtCtx mptsasInternalCtx mptsasTaskCtx mptsasDeviceResetCtx mptsas_eh_timed_out __func__.44857 mptsas_find_phyinfo_by_sas_address mptsas_find_portinfo_by_sas_address mptsas_set_rphy mptsas_fw_event_off mptsas_fw_event_on mptsas_free_fw_event __func__.43437 mptsas_slave_alloc pci_alloc_consistent mptsas_find_vtarget mptsas_add_device_component pci_free_consistent mptsas_sas_device_pg0 mptsas_sas_expander_pg0 mptsas_qcmd mptsas_setup_wide_ports __func__.43950 mptsas_add_end_device __func__.44411 mptsas_init mptsas_transport_functions mptsas_mgmt_done mptsas_taskmgmt_complete mptsas_event_process mptsas_ioc_reset mptsas_cleanup_fw_event_q __func__.43463 mptsas_add_fw_event mptsas_firmware_event_work __func__.43354 mptsas_queue_rescan __func__.44113 __func__.44322 mptsas_ublock_io_sdev mptsas_reprobe_lun mptsas_target_reset __func__.44127 mptsas_block_io_sdev __func__.44177 __func__.47248 __func__.44100 mptsas_issue_tm.clone.0 pci_unmap_single.clone.2 mptsas_sas_enclosure_pg0.clone.3 mptsas_add_device_component_by_fw mptsas_phy_reset __func__.44968 mptsas_target_destroy mptsas_get_bay_identifier mptsas_target_alloc mptsas_get_enclosure_identifier mptsas_get_linkerrors mptsas_port_delete __func__.43615 mptsas_remove mptsas_del_end_device __func__.44472 mptsas_expander_delete mptsas_smp_handler __func__.45106 mptsas_probe_one_phy __func__.45705 __func__.45526 mptsas_expander_refresh __func__.46145 mptsas_adding_inactive_raid_components mptsas_add_device_component_starget_ir mptsas_slave_configure mptsas_probe_hba_phys mptsas_scan_sas_topology __func__.46409 mptsas_probe mptsas_driver_template __key.47365 max_lun __key.47366 __key.47367 __key.11509 mpt_loadtime_max_sectors mpt_pt_clear __key.47372 mptsas_hotplug_work __func__.46820 mptsas_send_raid_event __func__.46991 mptsas_send_ir2_event __func__.47201 __func__.44578 __func__.46285 __func__.47127 __func__.43396 __mod_mpt_loadtime_max_sectors97 __mod_mpt_loadtime_max_sectorstype95 __param_mpt_loadtime_max_sectors __param_str_mpt_loadtime_max_sectors __mod_max_lun92 __mod_max_luntype91 __param_max_lun __param_str_max_lun __mod_mpt_pt_clear86 __mod_mpt_pt_cleartype83 __param_mpt_pt_clear __param_str_mpt_pt_clear __mod_version80 __mod_license79 __mod_description78 __mod_author77 mptsas_pci_table .LC89 mptsas.mod.c _rheldata __mod_srcversion152 __mod_alias150 __mod_alias149 __mod_alias148 __mod_alias147 __mod_alias146 __mod_alias145 __module_depends ____versions __mod_vermagic5 mpt_put_msg_frame_hi_pri mptsas_shutdown mpt_deregister mpt_clear_taskmgmt_in_progress_flag mpt_detach mpt_reset_deregister mptscsih_host_attrs dma_ops mptscsih_qcmd mptscsih_bios_param dev_get_drvdata mptscsih_io_done mptscsih_slave_configure mpt_config wait_for_completion_timeout mptscsih_taskmgmt_complete mptscsih_ioc_reset mpt_free_msg_frame __this_module complete mptscsih_remove __pci_register_driver mptsas_schedule_target_reset mptscsih_is_phys_disk scsi_internal_device_unblock cleanup_module sas_port_alloc_num memcpy kfree mpt_raid_phys_disk_pg1 int_to_scsilun mptscsih_proc_info __scsi_iterate_devices mptscsih_host_reset sas_remove_host __phys_addr scsi_is_sas_rphy kmem_cache_alloc_trace mptbase_sas_persist_operation pci_unregister_driver init_module mpt_GetIocState mpt_Soft_Hard_ResetHandler sas_phy_alloc scsi_device_lookup device_reprobe starget_for_each_device msecs_to_jiffies __stack_chk_fail queue_delayed_work_on scsi_add_device mpt_put_msg_frame pv_irq_ops sas_phy_free mpt_register mpt_event_deregister scsi_device_put __mod_pci_device_table mpt_findImVolumes mptscsih_taskmgmt_response_code _spin_unlock_irqrestore mptscsih_scandv_complete list_del sas_port_add per_cpu__kernel_stack mutex_lock warn_slowpath_null sas_port_mark_backlink mptscsih_resume mcount strncpy mptscsih_raid_id_to_num mpt_event_register mpt_raid_phys_disk_pg0 printk __mutex_init sas_end_device_alloc mutex_lock_interruptible jiffies_to_msecs sas_read_port_mode_page mptscsih_suspend sas_expander_alloc mpt_raid_phys_disk_get_num_paths mptsas_expander_add scsi_internal_device_block del_timer_sync scsi_is_host_device sas_attach_transport per_cpu__cpu_number __init_waitqueue_head sas_port_delete __list_add jiffies mptscsih_slave_destroy scsi_print_command mptscsih_change_queue_depth _spin_lock_irqsave param_set_int sas_rphy_add sas_port_delete_phy mutex_unlock init_timer_key sas_rphy_free x86_dma_fallback_dev mpt_get_msg_frame sas_port_add_phy mptscsih_dev_reset mptsas_refreshing_device_handles mpt_attach mpt_reset_register malloc_sizes mptscsih_info mptscsih_abort sas_phy_add dev_printk mpt_set_taskmgmt_in_progress_flag scsi_remove_device scsi_add_host_with_dma param_get_int mptscsih_dev_attrs scsi_track_queue_full mptscsih_get_scsi_lookup scsi_host_alloc sas_release_transport __kmalloc mptsas.ko.debug ע .rodata.str1.1 .rodata.str1.8 .rela.data .rheldata .rela.rodata .symtab .strtab .shstrtab .rela__mcount_loc .note.gnu.build-id .rela__bug_table .rela.gnu.linkonce.this_module .note.module.sig .gnu_debuglink .rela__param .modinfo .rela.smp_locks __versions .rela.parainstructions .bss .rela.text .rela.init.text .rela.exit.text .rela.devexit.text m @ $ " p h ؉ R ! = p w 8 ! - A ( ! M [ H ! 9 4 p !
2 X 2 k
O , H ! 8 @ ! X p ` ! ` @ x ! ` [ ( ! * $ @; > ! A 0 C 0 ! D D x A D ( " I ^ q Q q [