Thread %d.%ldThread %ldEnding remote debugging. %s-packetextended-remoteset remote show remote compare-sectionsremotebreakset remote interrupt-sequenceinterrupt-on-connectremotewritesizememory-write-packet-sizememory-read-packet-sizehardware-watchpoint-limithardware-breakpoint-limitremoteaddresssizebinary-downloadverbose-resumevContpass-signalsQPassSignalsprogram-signalsQProgramSignalssymbol-lookupqSymbolset-registerfetch-registersoftware-breakpointZ0hardware-breakpointZ1write-watchpointZ2read-watchpointZ3access-watchpointZ4read-aux-vectorqXfer:auxv:readqXfer:features:readlibrary-infoqXfer:libraries:readlibrary-info-svr4qXfer:libraries-svr4:readmemory-mapqXfer:memory-map:readread-spu-objectqXfer:spu:readwrite-spu-objectqXfer:spu:writeosdataqXfer:osdata:readqXfer:threads:readread-siginfo-objectqXfer:siginfo:readwrite-siginfo-objectqXfer:siginfo:writetraceframe-infoqXfer:trace-frame-info:readunwind-info-blockqXfer:uib:readqGetTLSAddrqGetTIBAddrreverse-continuereverse-stepsupported-packetsqSupportedsearch-memoryqSearch:memoryhostio-openvFile:openhostio-preadvFile:preadhostio-pwritevFile:pwritehostio-closevFile:closehostio-unlinkvFile:unlinkhostio-readlinkvFile:readlinkvAttachvRunnoackQStartNoAckModevKillquery-attachedqAttachedconditional-tracepointsConditionalTracepointsconditional-breakpointsConditionalBreakpointsbreakpoint-commandsBreakpointCommandsFastTracepointsTracepointSourceallowQAllowstatic-tracepointsStaticTracepointsinstall-in-traceInstallInTraceread-sdata-objectqXfer:statictrace:readread-fdpic-loadmapqXfer:fdpic:readdisable-randomizationQDisableRandomizationQAgenttrace-buffer-sizeQTBuffer:sizedisable-btraceQbtrace:offenable-btraceQbtrace:btsread-btraceqXfer:btraceZ-packetDelete a remote file.hardsoftInvalid %s (bad syntax).Packet size not changed.Section %s, range %s -- %s: MIS-MATCHED! showlistUnknown remote I/O error %dRemote I/O error: %sfile to deletefile to getError reading %s.Successfully sent file "%s". file to putremote_filename_p (filename)sending: received: qOffsetsRemote failure reply: %sText=;Data=;Bss=TextSeg=;DataSeg=No process to detach from.D;%xCan't detach process.P%s=Bad result from packet_ok,%d,%xvKill;%xCan't kill processnumsigs < 256Too long remote packet.vFlashDonevFlashErase:%s,%sZ%x,z%x,qCqAttached:%xInvalid remote reply: %sbad switchqTfPqTsPqTfVqTsVqRelocInsn:invalid qRelocInsn packet: %sqRelocInsn:%xE01QTNotes:user:notes:tstop:Bogus reply from target: %sval >= 0 || val == -1QTBuffer:size:QTBuffer:circular:%xQTDisconnected:%xqTV:%xpc:%stdp:%xrange:%s:%soutside:%s:%sUnknown trace find type %dQTStopqTP:%x:%sqTStatusqTStatus: QTStartQTDisable:%x:%sQTEnable:%x:%sQTDV:%x:%s:%x:QTDPsrc:QTDP:%x:%s:%c:%lx:%x:F%x:S:X%x,QTDP:-%x:%s:%s%cQTDP:-%x:%s:%s%s%scondQTinitQDisableRandomization:%xargs != NULLR%xqCRC:%lx,%lxqTSTMat:qTfSTMqTsSTMQAgent:%dqTMinFTPILenqSymbol::qSymbol::%sqSymbol:%s:%sqSymbol:spustatictracevFlashWrite:annex == NULLlibrarieslibraries-svr4remote_descfdpicuibannex != NULLreadbuf != NULLannex[i] == '\0'reg != NULLremote_threads_extra_infoqThreadExtraInfo, Name: %s, State: %s, Priority: %sqfThreadInfoqsThreadInfovAttach;%xAttaching to %s failedwait_status != NULLwait_status == NULLmultiprocess+qRelocInsn+qSupported:QNonStop:1QNonStop:0Still connected.Remote debugging using remote_stop called vCont;tvCont;t:Stopping %s failed: %svStoppedPacketSizeqXfer:traceframe-info:readmultiprocessQNonStopDisconnectedTracingReverseContinueReverseStepEnableDisableTracepointstracenzqXfer:btrace:readReply contains invalid hex digit %dReceived too much data from remote target; ignoring overflow.Unmatched escape character in target response.Remote qSupported response supplied an unexpected value for "%s".Target does not support branch tracing.Cannot process branch tracing result. XML parsing not supported.Malformed packet(a) (missing colon): %s Packet: '%s' Malformed packet(b) (missing colon): %s Packet: '%s' Remote sent bad register number %s: %s Packet: '%s' Remote register badly formatted: %s here: %sNo process or thread specified in stop reply: %shw_bp_to_z: bad watchpoint type %dDuplicate g packet description added for size %diter != NULL && iter->p != NULLnotif: discard queued event: 'Stop' in %s notif: push 'Stop' %s to queue %d packet_ok: attempt to use a disabled packetProtocol error: %s (%s) conflicting enabled responses.Enabled packet %s (%s) not recognized by stubPacket %s (%s) is NOT supported could not set remote traceframeRemote communication error. Target disconnected.Support for the `%s' packet is auto-detected, currently %s. Support for the `%s' packet is currently %s. Packets are fixed at %ld bytes. Packets are limited to %ld bytes. Timeout in mid-packet, retrying Saw new packet start in middle of old one Timeout in checksum, retrying Communication error in checksum Bad checksum, sentsum=0x%x, csum=0x%x, buf=%s Invalid run length encoding: %s Cannot execute this command while the target is running.Packet instead of Ack, ignoring it Watchdog timeout has expired. Target detached.Ignoring packet error, continuing... remote rcmd is only available after target open"monitor" command ``%s'' is too long.Communication problem with target.Target does not support this command.Readlink returned %d, but %d bytes.Read returned %d, but %d bytes.Remote target reported "%s" without a size.Remote target reported "%s" with a bad size: "%s".limiting remote suggested packet size (%d bytes) to %dPattern is too large to transmit to remote target.Unknown qSearch:memory reply: %sUnknown remote qXfer reply: %sRemote qXfer reply contained no data.Invalid value for interrupt_sequence_mode: %s.Debugging a target over a serial line. Argument given to "disconnect" when remotely debugging.Remote 'g' packet reply is too long: %sunexpected end of 'g' packet replySet use of remote protocol `%s' (%s) packetShow current use of remote protocol `%s' (%s) packetRemote serial target in gdb-specific protocolUse a remote computer via a serial line, using a gdb-specific protocol. Specify the serial device it is connected to (e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).Extended remote serial target in gdb-specific protocolUse a remote computer via a serial line, using a gdb-specific protocol. Specify the serial device it is connected to (e.g. /dev/ttya).Remote protocol specific variables Configure various remote-protocol specific variables such as the packets being usedCompare section data on target to the exec file. Argument is a single section name (default: all loaded sections).Send an arbitrary packet to a remote target. maintenance packet TEXT If GDB is talking to an inferior via the GDB serial protocol, then this command sends the string TEXT to the inferior, and displays the response packet. GDB supplies the initial `$' character, and the terminating `#' character and checksum.If set, a break, instead of a cntrl-c, is sent to the remote target.Show whether to send break if interrupted.Set whether to send break if interrupted.show remote interrupt-sequenceValid value is "Ctrl-C", "BREAK" or "BREAK-g". The default is "Ctrl-C".Show interrupt sequence to remote target.Set interrupt sequence to remote target. If set, interrupt sequence is sent to remote target. Show whether interrupt-sequence is sent to remote target when gdb connects to.Set whether interrupt-sequence is sent to remote target when gdb connects to.Set the maximum number of bytes per memory write packet (deprecated).Show the maximum number of bytes per memory write packet (deprecated).Set the maximum number of bytes per memory-write packet. Specify the number of bytes in a packet or 0 (zero) for the default packet size. The actual limit is further reduced dependent on the target. Specify ``fixed'' to disable the further restriction and ``limit'' to enable that restriction.Set the maximum number of bytes per memory-read packet. Specify the number of bytes in a packet or 0 (zero) for the default packet size. The actual limit is further reduced dependent on the target. Specify ``fixed'' to disable the further restriction and ``limit'' to enable that restriction.Show the maximum number of bytes per memory-write packet.Show the maximum number of bytes per memory-read packet.Specify a negative limit for unlimited.Show the maximum number of target hardware watchpoints.Set the maximum number of target hardware watchpoints.Show the maximum length (in bytes) of a target hardware watchpoint.Set the maximum length (in bytes) of a target hardware watchpoint.hardware-watchpoint-length-limitShow the maximum number of target hardware breakpoints.Set the maximum number of target hardware breakpoints.Show the maximum size of the address (in bits) in a memory packet.Set the maximum size of the address (in bits) in a memory packet.get-thread-local-storage-addressget-thread-information-block-addressWhen set, GDB will attempt to use the remote breakpoint and watchpoint packets.Show use of remote protocol `Z' packets Set use of remote protocol `Z' packetsManipulate files on the remote system Transfer files to and from the remote target system.Copy a local file to the remote system.Copy a remote file to the local system.Show the remote pathname for "run"Set the remote pathname for "run"Argument required (integer, `fixed' or `limited').The target may not be able to correctly handle a %s of %ld bytes. Change the packet size? Send the ASCII ETX character (Ctrl-c) to the remote target to interrupt the execution of the program. send a break signal to the remote target to interrupt the execution of the program. Send a break signal and 'g' a.k.a. Magic SysRq g to the remote target to interrupt the execution of Linux kernel. command cannot be used without an exec filetarget memory fault, section %s, range %s -- %sOne or more sections of the remote executable does not match the loaded file No loaded section named '%s'. async_remote_interrupt called regnum < gdbarch_num_regs (gdbarch)command can only be used with remote targetSuccessfully deleted file "%s". Invalid parameters to remote deleteSuccessfully fetched file "%s". Invalid parameters to remote getRemote write of %d bytes returned 0!Invalid parameters to remote putasync_remote_interrupt_twice called Interrupted while waiting for the program. Give up (and stop debugging it)? notif: process: '%s' ack pending event notif: process: '%s' no pending reply remote-packet command requires packet text as argumentTarget reported unsupported offsets: %sMalformed response to offset query, %sCan not handle qOffsets TextSeg response with this symbol filesect_index_data not initializedArgument given to "detach" when remotely debugging.Remote doesn't know how to detachCould not fetch register "%s"; remote failure reply '%s'fetch_register_using_p: early buf terminationCould not write register "%s"; remote failure reply '%s'Could not write registers; remote failure reply '%s'remote_insert_hw_breakpoint: reached end of functionRemote target does not support vFlashDoneError finishing flash operationRemote target does not support flash eraseError erasing flash with vFlashErase packetremote_remove_hw_breakpoint: reached end of functionremote_insert_watchpoint: reached end of functionremote_remove_watchpoint: reached end of functionremote_write_bytes_aux: bad packet formatminimum packet size too small to write dataCan't send signals to this remote system. %s not sent. binary downloading NOT supported by target binary downloading supported by target remote_write_bytes: bad internal stateRemote target doesn't support qGetTLSAddr packetRemote target failed to process qGetTLSAddr requestTLS not supported or disabled on this targetBad register packet; fetching a new packet Remote 'g' packet reply is of odd length: %sToo many sections for read-only sections definition packet.remote.c: error in outgoing packet.remote.c: error in outgoing packet at field #%ld.Target returns error code '%s'.warning: relocating instruction: Target does not support disconnected tracing.Remote file name too long for trace save packetUnable to parse trace frame numberUnable to parse tracepoint numberBogus trace status reply from target: %sTarget does not support disabling tracepoints while a trace run is ongoing.Error on target while disabling tracepoint.Target does not support enabling tracepoints while a trace run is ongoing.Error on target while enabling tracepoint.Trace state variable name too long for tsv definition packetError on target while downloading trace state variable.Target does not support source download.Fast tracepoint not valid during downloadTarget does not support fast tracepoints, downloading %d as regular tracepointStatic tracepoint not valid during downloadTarget does not support static tracepointsTarget does not support conditional tracepoints, ignoring tp %d condTarget does not support tracepoints.Error on target while setting tracepoints.Target does not support QDisableRandomization.Bogus QDisableRandomization reply from target: %sRemote file name too long for run packetArgument list too long for run packetRunning the default executable on the remote target failed; try "set remote exec-file"?Running "%s" on the remote target failedRemote target does not support "set remote exec-file"Remote target does not support "set args" or run remote target does not support this operationRemote target doesn't support qGetTIBAddr packetRemote target failed to process qGetTIBAddr requestqGetTIBAddr not supported or disabled on this targetQAllow:WriteReg:%x;WriteMem:%x;InsertBreak:%x;InsertTrace:%x;InsertFastTrace:%x;Stop:%xRemote refused setting permissions with: %sCould not disable branch tracing for %s: %sCould not disable branch tracing for %s.Could not enable branch tracing for %s: %sCould not enable branch tracing for %s.remote query is only available after target openisprint (annex[i]) && annex[i] != '$' && annex[i] != '#'Incomplete response to threadinfo request.ERROR RMT: threadinfo tag mismatch.ERROR RMT: length of threadid is not 16.ERROR RMT: 'exists' length too long.ERROR RMT: unknown thread info tag.Command can only be used when connected to the remote target.Remote fetch threadlist -infinite loop-.RMT ERROR : failed to get remote thread list.RMT ERROR: threadlist response longer than requested.This target does not support attaching to a processAttaching to %s failed with: %sempty item in "qSupported" responseunrecognized item "%s" in "qSupported" responseNon-stop mode requested, but remote does not support non-stopRemote refused setting non-stop mode with: %sRemote refused setting all-stop mode with: %sThe target is not running (try extended-remote?)remote didn't report the current thread in non-stop modeTrace is already running on the target. To open a remote debug connection, you need to specify what serial device is attached to the remote system (e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).Already connected to a remote target. Disconnect? The remote protocol may be unreliable over UDP. Some events may be lost, rendering further debugging impossible.strlen (rs->buf) < get_remote_packet_size ()Unexpected vCont reply in non-stop mode: %s - Can't pass signal %d to target in reverse: ignored.Remote reverse-step not supported.Remote reverse-continue not supported.Remote server does not support stopping threadsЁ╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[А╔[@╔[Ш╚[Ш╚[Ш╚[Ш╚[Ш╚[╔[Ш╚[╨╚[/^\`\Є_\╣_\:`\=Н\БЙ\БЙ\БЙ\БЙ\БЙ\Н\БЙ\╤М\БЙ\гМ\uМ\М\9М\БЙ\╒Л\БЙ\БЙ\БЙ\ЯЛ\qЛ\БЙ\CЛ\Л\Ctrl-CBREAKBREAK-gVEC_cached_reg_t_quick_push╚иО╧иО╒иОVEC_static_tracepoint_marker_p_quick_pushremote_set_trace_buffer_size0123456789abcdefgetpkt_or_notif_sane_1remote_xfer_partialremote_program_signalsremote_pass_signalsremote_store_registerspacket_reg_from_regnumremote_fetch_registersdemand_private_inforemote_vcont_resumeextended_remote_attach_1extended_remote_runremote_bfd_iovec_openregister_remote_g_packet_guessVEC_remote_g_packet_guess_s_quick_pushqueue_stop_reply_p_freequeue_stop_reply_p_lengthqueue_stop_reply_p_iteratequeue_stop_reply_p_remove_elemqueue_stop_reply_p_is_emptyqueue_stop_reply_p_peekqueue_stop_reply_p_dequequeue_stop_reply_p_enqueremote_register_number_and_offset & $Ў╜Ц╝О╦mвThis used to enable the data cache for remote targets. The cache functionality is now controlled by the memory region system and the "stack-cache" flag; "remotecache" now does nothing and exists only for compatibility reasons.Show cache use for remote targets.Set cache use for remote targets.Print information on the dcache performance. With no arguments, this command prints the cache configuration and a summary of each line in the cache. Use "info dcache to dump" the contents of a given line.Use this command to set number of lines in dcache and line-size.Set dcache line size in bytes (must be power of 2)."set dcache" must be followed by the name of a subcommand. Usage: info dcache [linenumber] Line %d: address %s [%d hits] Dcache %u lines of %u bytes each. Cache state: %d active lines, %d hits Deprecated remotecache flag is %s. Dcache size must be greater than 0.Invalid dcache line size: %u (must be power of 2).remotecachedcacheset dcache Show dcachesettings.show dcache Show dcache line size.line-sizeShow number of dcache lines.Set number of dcache lines.No data cache available. No such cache line exists. Contains data for %s tsavetvariabletvariablesstatic-tracepoint-markerstfind tfindoutsidetstatuststoptstartwhile-steppingtevalactionsdefault-collectdisconnected-tracingcircular-trace-buffertrace-usertrace-notestrace-stop-notesLocal trace dump fileexpression is malformedtracepoint.cexpression has min height < 0unknown tfind type `%s' collect register %d unordered_removeNo trace state variables. trace-variablesInitialinitialCurrentScope for %s: Symbol %s is a bogus symbol, class %d. a constant with value %s (%s)constant bytes: in static storage at address an argument in register $%sa typedef. a label at address a function at address Unresolved Staticoptimized out. , length %d. bad marker definition: %stframestcreatedtfreedisconncircularstarttimestoptimeusernametrace_framecould not change traceframe%x:%s:%s:%x:%x:TRACE0 R %x status %c;%s;tframes:%x;tcreated:%x;tfree:%x;tsize:%x;disconn:%x;circular:%xtsv %x:%s:%x:%s tp T%x:%s:%c:%x:%xtp V%x:%s:%x:%s :X%x,%stp A%x:%s:%s tp S%x:%s:%s tp Z%s unknown option `%s'Collecting memranges: (%d, %s, %ld) M-1,%s,%lXM%X,%s,%lXX%08X,trace_linetrace_functrace_fileEnd of trace buffer. No trace frame found Line %d of "%s" is at address but contains no code. Cannot find a good line.not debugging trace buffertrace-filets->running_knowndisconnectionstopping-tracepointerror-descriptionframes-createdbuffer-freeuser-name%ld.%06ldstart-timestop-timestop-reasonNo locals found in scope.No args found in scope.(%d,,%ld) LOC_REG[parm] %s: (will not collect %s) from frame ptr reg %d from reg %d Bad action list item: %s$reg$_ret$loc$arg$_sdatacollect static trace data Register $%s not availableOP_REGISTER: stepping_listNo current trace frame.collect %stvariable $%sSyntax is $NAME [ = EXPR ]__tsvcond:cmd:Using a trace file. Run/stop status is unknown. Collected %d trace frames. (%d%% full)Trace buffer is circular. Trace user is %s. Trace notes: %s. Trace is not running.StaticTracepointMarkersTableCntmarker-idEnbAddressWhatwhatfullnameData: "extra-datatracepoints-attracepoint-idnumber-of-tracepointsmarkerNo trace file specified.status tp tsv Not confirmed.fast No tracepoints enabled!loc->insertedNew trace run not started.tunknowntnotruntfulltdisconnectedtpasscountterrorList the variables local to a scopeTracing of program execution without stopping the program.Print everything collected at the current tracepoint.Save the trace data to a file. Use the '-r' option to direct the target to save directly to the file, using its own filesystem.Define a trace state variable. Argument is a $-prefixed name, optionally followed by '=' and an expression that sets the initial value at the start of tracing.Delete one or more trace state variables. Arguments are the names of the variables to delete. If no arguments are supplied, delete all variables.Status of trace state variables and their values. List target static tracepoints markers. Select a trace frame; No argument means forward by one frame; '-' means backward by one frame.Select a trace frame whose PC is outside the given range (exclusive). Usage: tfind outside addr1, addr2Select a trace frame whose PC is in the given range (inclusive). Usage: tfind range addr1,addr2Select a trace frame by source line. Argument can be a line number (with optional source file), a function name, or '*' followed by an address. Default argument is 'the next source line that was traced'.Select a trace frame by tracepoint number. Default is the tracepoint for the current trace frame.Select a trace frame by PC. Default is the current PC, or the PC of the current trace frame.De-select any trace frame and resume 'live' debugging.Select the first trace frame in the trace buffer.Display the status of the current trace data collection.Stop trace data collection. Usage: tstop [ ... ] Any arguments supplied are recorded with the trace as a stop reason and reported by tstatus (if the target supports trace notes).Start trace data collection. Usage: tstart [ ... ] Any arguments supplied are recorded with the trace as a note and reported by tstatus (if the target supports trace notes).Ends a list of commands or actions. Several GDB commands allow you to enter a list of commands or actions. Entering "end" on a line by itself is the normal way to terminate such a list. Note: the "end" command cannot be used at the gdb prompt.Specify single-stepping behavior at a tracepoint. Argument is number of instructions to trace in single-step mode following the tracepoint. This command is normally followed by one or more "collect" commands, to specify what to collect while single-stepping. Note: this command can only be used in a tracepoint "actions" list.Specify one or more data items to be collected at a tracepoint. Accepts a comma-separated list of (one or more) expressions. GDB will collect all data (variables, registers) referenced by that expression. Also accepts the following special arguments: $regs -- all registers. $args -- all function arguments. $locals -- all variables local to the block/function scope. $_sdata -- static tracepoint data (ignored for non-static tracepoints). Note: this command can only be used in a tracepoint "actions" list.Specify one or more expressions to be evaluated at a tracepoint. Accepts a comma-separated list of (one or more) expressions. The result of each evaluation will be discarded. Note: this command can only be used in a tracepoint "actions" list.Specify the actions to be taken at a tracepoint. Tracepoint actions may include collecting of specified data, single-stepping, or enabling/disabling other tracepoints, depending on target's capabilities.Show the list of expressions to collect by defaultSet the list of expressions to collect by defaultUse this to continue a tracing run even if GDB disconnects or detaches from the target. You can reconnect later and look at trace data collected in the meantime.Show whether tracing continues after GDB disconnects.Set whether tracing continues after GDB disconnects.Use this to make the trace buffer into a circular buffer, which will discard traceframes (oldest first) instead of filling up and stopping the trace run.Show target's use of circular trace buffer.Set target's use of circular trace buffer.Use this to choose a size for the trace buffer. Some targets may have fixed or limited buffer sizes. A value of -1 disables any attempt to set the buffer size and lets the target choose.Show requested size of trace buffer.Set requested size of trace buffer.Show the user name to use for current and future trace runsSet the user name to use for current and future trace runsShow the notes string to use for current and future trace runsSet notes string to use for current and future trace runsShow the notes string to use for future tstop commandsSet notes string to use for future tstop commandsUse a trace file as a target. Specify the filename of the trace file.This command can only be used in a tracepoint actions list.This command cannot be used at the top level.Premature end of file while reading trace fileUnknown block type '%c' (0x%x) in trace frameTarget does not support trace notes, stop note ignoredTarget does not support trace notes, note ignoredTarget does not support trace notes, user ignoredCan not parse XML trace frame info; XML support was disabled at compile timeExpression is too complicated.Internal: register number %d too large for tracepointtfile_xfer_partial: trace file is read-onlyTracepoint %d has multiple locations, cannot infer $pcTracepoint %d does while-stepping, cannot infer $pcEnter actions for tracepoint %d, one per line.Delete all trace state variables? Name "%s" not prefixed with '$', ignoringNo trace variable named "$%s", not deletingMust supply a non-empty variable name$%s is not a valid trace state variable namerequires an argument (function, line or *addr) to define a scopea local variable in register $%san argument at stack/frame offset %sa local variable at frame offset %sa reference argument at offset %sthe address of an argument, in register $%sScope for %s contains no locals or arguments. Malformed trace status, at %s Status line: '%s' Buffer too small for source encodingSource string too long for bufferTarget failed to save trace data to '%s'.Unable to open file '%s' for saving trace data (%s)Failure to get requested trace buffer datafile in which to save trace dataTrace data saved to file '%s'. Collecting static trace data Collecting registers (mask): 0xTarget failed to find requested trace frame.Found trace frame %d, tracepoint %d No longer looking at any trace frame May not look at trace frames while trace is running.No current tracepoint -- please supply an argument.No line number information available.Attempting to find line %d instead. Line number %d is out of range for "%s".Usage: tfind range , Usage: tfind outside , already at start of trace bufferinvalid input (%d is less than zero)Can't collect locals; no symbol table info available. Can't collect args; no symbol table info available.%s: don't know symbol class %d constant %s (value %s) will not be collected. LOC_STATIC %s: collect %ld bytes at %s. Sorry, don't know how to do LOC_REF_ARG yet. LOC_LOCAL %s: Collect %ld bytes at offset LOC_REGPARM_ADDR %s: Collect %ld bytes at offset %s has been optimized out of existence. Target does not support "/s" option for string tracing.Undefined collection format "%c".Invalid tracepoint command '%s'`%s' is not a tracepoint action, or is ambiguous.constant `%s' (value %s) will not be collected.`%s' is optimized away and cannot be collected.while-stepping step count `%s' is malformed.`%s' is not a supported tracepoint action.No known tracepoint matches 'current' tracepoint #%d.Data collected at tracepoint %d, trace frame %d: Name of trace variable should start with '$'Syntax must be $NAME [ = EXPR ]Trace state variable $%s now has initial value %s. Trace state variable $%s created, with initial value %s. Assuming trace state variable $%s is same as target's variable %d. Created trace state variable $%s for target's variable %d. Unhandled trace block type (%d) '%c ' while building trace frame info.Unrecognized char '%c' in tracepoint definition, skipping restUnrecognized tracepoint piece '%c', ignoringTrace can not be run on this target. Trace is running on the target. No trace has been run on the target. Trace stopped by a tstop command (%s). Trace stopped by a tstop command. Trace stopped because the buffer was full. Trace stopped because of disconnection. Trace stopped by tracepoint %d. Trace stopped by an error (%s, tracepoint %d). Trace stopped by an error (%s). Trace stopped for an unknown reason. Trace stopped for some other reason (%d). Buffer contains %d trace frames (of %d created total). Trace buffer has %d bytes of %d bytes freeTrace buffer has %d bytes free. Trace will continue if GDB disconnects. Trace will stop if GDB disconnects. Looking at trace frame %d, tracepoint %d. Not looking at any trace frame. Trace started at %ld.%06ld secs, stopped %ld.%06ld secs later. Trace started at %ld.%06ld secs. Trace stopped at %ld.%06ld secs. Probed by static tracepoints: Assuming tracepoint %d is same as target's tracepoint %d at %s. Created tracepoint %d for target's tracepoint %d at %s. Failed to create tracepoint for target's tracepoint %d at %s, skipping it. File is not a valid trace file.Ignoring trace file definition "%s"Excessively long lines in trace fileNo register block size recorded in trace fileNo traceframes present in this file.Pending tracepoints will not be resolved while GDB is disconnected Trace is running and will continue after detach; detach anyway? Trace is running but will stop on detach; detach anyway? No tracepoints defined, not starting traceMay not insert %stracepoints, skipping tracepoint %dNo tracepoints enabled, not starting traceNo tracepoints that may be downloaded, not starting traceTarget does not support trace user/notes, info ignoredA trace is running already. Start a new run? dя\єё\щё\╡ё\Фё\sё\Eё\$ё\ё\∙Ё\сЁ\ЖЁ\5Ё\Ё\┘я\╨]╨]p]h]P]@]ш]╘ ]~#]$]╒"]!]P#]о#]!]╘ ]╘ ]╘ ]╘ ]р!]░!]р!]GG]БK]NK]?K]0K]K]РK]P┘\VEC_mem_range_s_quick_pushVEC_tsv_s_unordered_removeVEC_char_ptr_quick_pushVEC_breakpoint_p_quick_pushtrace_status_mistart_tracingencode_actions_10123456789abcdefVEC_tsv_s_quick_pushGDB bug: ax-general.c (read_const): incomplete constantGDB bug: ax-general.c (ax_const_d): floating point not supported yetGDB bug: ax-general.c (ax_label): label target out of range'%s' is a pseudo-register; GDB cannot yet trace its contents.GDB bug: ax-general.c (ax_trace_quick): size out of range for trace_quickGDB bug: ax-general.c (generic_ext): bit count out of rangeGDB bug: ax-general.c (ax_pick): stack depth out of rangeax-general.c (ax_string): string length is %d, out of allowed rangeax-general.c (ax_tsv): variable number is %d, out of rangeGDB bug: ax-general.c (ax_reg): register number out of rangeTrace '%s' failed.Scope: %s Reg mask:%3d %3d %3d %s "%s", %d argsax-general.cdiv_signeddiv_unsignedrem_signedrem_unsignedlshrsh_signedrsh_unsignedtrace_quicklog_notbit_andbit_orbit_xorbit_notequalless_signedless_unsignedref16ref32ref64ref_floatref_doubleref_long_doublel_to_dd_to_lif_gotoconst16const32const64zero_extgetvsetvtracevtrace16invalid2"#$%Translate an expression into remote agent bytecode for tracing. Usage: maint agent [-at location,] EXPRESSION If -at is given, generate remote agent bytecode for this location. If not, generate remote agent bytecode for current frame pc address.Translate an expression into remote agent bytecode for evaluation. Usage: maint agent-eval [-at location,] EXPRESSION If -at is given, generate remote agent bytecode for this location. If not, generate remote agent bytecode for current frame pc address.Translate an expression into remote agent bytecode for evaluation and display the bytecodes.Invalid combination of types in %s.Invalid type of operand to `!'.gen_fetch: Unsupported type code `%s'.gen_var_ref: LOC_CONST_BYTES symbols are not supportedCannot compute value of typedef `%s'.Cannot find value of botched symbol `%s'.Value not scalar: cannot be an rvalue.Invalid type cast: intended type must be scalar.Casts to requested type are not yet implemented.TYPE_CODE (value2->type) == TYPE_CODE_INTAttempt to dereference a generic pointer.static field `%s' has been optimized out, cannot usegen_bitfield_ref: bitfield too wideThe left operand of `%s' is not a %s.Structure does not live in memory.Couldn't find member named `%s' in struct/union/class `%s'`%s' has been optimized out, cannot use$%s is not a trace state variable, may not assign to itMay only assign to trace state variables'%s' is a user-register; GDB cannot yet trace user-register contents.$%s is not a trace state variable; GDB agent expressions cannot use convenience variables.Left operand of `@' must be an object in memory.Right operand of `@' must be a constant, in agent expressions.Right operand of `@' must be an integer.Right operand of `@' must be positive.Invalid type of operand to `~'.Argument of unary `*' is not a pointer.Operand of `&' is an rvalue, which has no address.Operand of `&' is in a register, and has no address.pointer to a structure or unionnon-aggregate type to gen_struct_elt_for_referencepointers to bitfield members not allowedCannot reference non-static field "%s"No symbol "%s" in namespace "%s".non-aggregate type in gen_aggregate_elt_refAttempt to use a type name as an expression.Unsupported operator %s (%d) in expression.GDB can't do agent expression translation with overlays.Must start with a format string.Bad format string, non-terminated '"'.First argument of `-' is a pointer, but second argument is neither an integer nor a pointer of the same type.cannot subscript requested type: cannot call user defined functionscannot subscript something of type `%s'cannot subscript requested typeArgument to arithmetic operation not a number or boolean.gen_expr: op case sets don't matchagent-evalagent-printfgen_fetch: strange sizeax-gdb.cCouldn't resolve symbol `%s'.pointer_type (value1->type)less thangen_deref: expected a pointernegationstructure or union->no `%s' foundThere is no field named %sexpression to translateInvalid argument syntaxadditionpointer_type (value2->type)subtractionmultiplicationdivisionremainderleft shiftright shiftbitwise andbitwise orbitwise exclusive-orUw]Иw]шx]xy]Аx]иx]└w]y]Hy]Иw]`x]рw]x]8x]Hx]╬Н]█Ц]█Ц]█Ц]█Ц]█Ц]╬Н]█Ц]█Ц]┐Х].Ч]█Ц]█Ц]█Ц]█Ц]█Ц]█Ц]█Ц]█Ц]█Ц]@Х]─Ф]ВФ]█Ц]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]ЭУ]╬Н]╬Н]╬Н]╬Н]╬Н]╛Т]╬Н]╬Н]Щ]╬Н]сШ]╬Н]╬Н]aШ]щЧ]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]▒Т];Т]╬Н]╬Н]@Щ]╬Н]╗С]╝Р]ЖР]│П]nП]rС]╬Н]╬Н]╬Н]╬Н]:Р]FП]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]╬Н]сО]сО]ГО]╬Н]%О] О]╬Н]╬Н]╬Н]╬Н]╬Н] О] О]уе]8и]Ии]й]8й]`й]уе]Ий]░й]уе]уе]Ёж]Pз]pз]Рз]╨ж]Нж]Аж] ж]-ж]уе]уе]уе]╨з]gen_ptrsubgen_ptrdiffgen_ptraddSet if the host system(3) call is allowed for the target.Show if the host system(3) call is allowed for the target.Garbage after "show remote system-call-allowed" command: `%s'Calling host system(3) call from target is %sallowed Illegal argument for "set remote system-call-allowed" commandsystem-call-allowed+-,Crenameisatty╬М╕]ijО0╗]Л═Мр╗]xкЧ░╛]Э═МP└]Р Оа┴]ВjОP├]}эН`─]╗╡Н╞]gОЛ`╚]Ч ОА╖]ZЗМ╨╔]'''' ''' '''''''''['Xremote-notif.cnc != exceptnotificationnotif: parse '%s' notif: ack '%s' When non-zero, debugging output about async remote notifications is enabled.Show debugging of async remote notification.Set debugging of async remote notification.notif: ignoring resent notification notif: Notification '%s' captured remote_async_get_pending_events_handlerremote_notif_processqueue_notif_client_p_freequeue_notif_client_p_lengthqueue_notif_client_p_iteratequeue_notif_client_p_remove_elemqueue_notif_client_p_is_emptyqueue_notif_client_p_peekqueue_notif_client_p_dequequeue_notif_client_p_enqueskipping section %s... into memory (%s to %s) Failed to open %s: %s.bfd_openw_with_cleanup: %s..newsecwriting dump file '%s' (%s)append binary dump binary dump tekhex dump ihex dump srec append dump Append appendihextekhexbinaryMissing filename.filename != NULL./cli/cli-dump.cNo value to %s.Invalid expression.Missing start address.Missing stop address.Start must be less than end.Failed to read bfd file %s: '%s'.Restoring section %s (0x%lx to 0x%lx)restore: memory write failed (%s).bfd_openw does not work with append.bfd_openw_with_cleanup: unknown mode %s."append binary" must be followed by a subcommand. "dump binary" must be followed by a subcommand. "dump tekhex" must be followed by a subcommand. "dump ihex" must be followed by a subcommand. "dump srec" must be followed by a subcommand. "append" must be followed by a subcommand. "dump" must be followed by a subcommand. Dump target code/data to a local file.Append target code/data to a local file.Write contents of memory to a raw binary file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specified FILE in raw target ordered bytes.Write the value of an expression to a raw binary file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in raw target ordered bytes.Write target code/data to an srec file.Write target code/data to an intel hex file.Write target code/data to a tekhex file.Write target code/data to a raw binary file.Append target code/data to a raw binary file.Write contents of memory to an srec file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specified FILE in srec format.Write the value of an expression to an srec file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in srec format.Write contents of memory to an ihex file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specified FILE in intel hex format.Write the value of an expression to an ihex file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in intel hex format.Write contents of memory to a tekhex file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specified FILE in tekhex format.Write the value of an expression to a tekhex file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in tekhex format.Write contents of memory to a raw binary file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specified FILE in binary format.Write the value of an expression to a raw binary file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in raw target ordered bytes.Append contents of memory to a raw binary file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specified FILE in raw target ordered bytes.Append the value of an expression to a raw binary file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in raw target ordered bytes.Restore the contents of FILE to target memory. Arguments are FILE OFFSET START END where all except FILE are optional. OFFSET will be added to the base address of the file (default zero). If START and END are given, only the file contents within that range (file relative) will be restored to target memory.value is not an lval: address assumed to be zeroInvalid memory address range (start >= end).Restore file %s offset 0x%lx start 0x%lx end 0x%lx Start address is greater than length of binary file %s.Restoring binary file %s into memory (0x%lx to 0x%lx) '%s' is not a recognized file format.scan_filename_with_cleanupInvalid commandWarning: '%s', an alias for the command '' (%s) is deprecated. ' is deprecated. Use '%s'. No alternative known. Lack of needed %scommandAmbiguous %scommand "%s": %s.%s%s -- that class.List of %scommands: documentation. Command class: %s Unclassified commands ./cli/cli-decode.cUndefined %scommand: "%s". Try "help%s%.*s".List of classes of %scommands: Type "help%s" followed by a class name for a list of commands in Type "help all" for the list of all commands. Type "help%s" followed by %scommand name Type "apropos word" to search for commands related to "word". Command name abbreviations are allowed if unambiguous. This command has a hook (or hooks) defined: This command is run after : %s (pre hook) This command is run before : %s (post hook) type == set_cmd || type == show_cmd!aliases && !prehook && !prehookee && !posthook && ! posthookeeQ╒Ет╒ЕДHЖVEC_char_ptr_quick_pushadd_set_or_show_cmdadd_alias_cmdDocument a user-defined command. Give command name as argument. Give documentation on following lines. End with a line of just "end".Define a new command name. Command name is argument. Definition appears on following lines, one command per line. End with a line of just "end". Use the "document" command to give documentation for the new command. Commands defined in this way may have up to ten arguments.Execute nested commands WHILE the conditional expression is non zero. The conditional expression must follow the word `while' and must in turn be followed by a new line. The nested commands must be entered one per line, and should be terminated by the word `end'.Execute nested commands once IF the conditional expression is non zero. The conditional expression must follow the word `if' and must in turn be followed by a new line. The nested commands must be entered one per line, and should be terminated by the word 'else' or `end'. If an else clause is used, the same rules apply to its nested commands as to the first ones.arg_cleanup called with no user args. called with NULL file pointer!%s:%d: Error in sourced command file: %sif/while commands require arguments.Missing argument %d in user function.user_args->count >= 0 && user_args->count <= 10Invalid control type in canned commands structure.user defined function may only have %d arguments.Max user call depth exceeded -- command aborted.Error executing canned sequence of commands.Recursed on a simple control type.Allocated body is smaller than this command type needs.End with a line saying just "end".Really redefine built-in command "%s"? Your new `%s' command does not hook any existing command.Type commands for definition of "%s".Error reading in canned sequence of commands.name of command to define"%s" is not a prefix command.Junk in argument list: "%s"./cli/cli-script.cbad reasonpythonloop_breakloop_continueControl nesting too deep!while %sif %scommands %sUser command "%s%s": Redefine command "%s"? Command "%s" not redefined.hook-hookpost-Proceed? User-defined.Command "%s" is built-in.Type documentation for "%s".└^^^0^ ^p^и^build_command_lineinsert_argsRead commands from a file named FILE. Usage: source [-s] [-v] FILE -s: search for the script in the source search path, even if FILE contains directories. -v: each command in FILE is echoed as it is executed. Note that the file "%s" is read automatically in this way when GDB is started.Maintenance commands. Some gdb commands are provided just for use by gdb maintainers. These commands are subject to frequent change, and may not be as well documented as user commands.User-defined commands. The commands in this class are those defined by the user. Use the "define" command to define a command.Specifying and examining files.Making program stop at certain points.Examining the stack. The stack is made up of stack frames. Gdb assigns numbers to stack frames counting from zero for the innermost (currently executing) frame. At any time gdb identifies one frame as the "selected" frame. Variable lookups are done with respect to the selected frame. When the program being debugged stops, gdb selects the innermost frame. The commands below can be used to select other frames by number or address.Print working directory. This is used for your program as well.Set working directory to DIR for debugger and program being debugged. The change does not take effect for the program being debugged until the next time it is started.Print a constant string. Give string as argument. C escape sequences may be used in the argument. No newline is added at the end of the argument; use "\n" if you want a newline to be printed. Since leading and trailing whitespace are ignored in command arguments, if you want to print some you must use "\" before leading whitespace to be printed or after trailing whitespace.off == no filename extension recognition (all sourced files are GDB scripts) soft == evaluate script according to filename extension, fallback to GDB script strict == evaluate script according to filename extension, error if not supportedShow mode for script filename extension recognition.Set mode for script filename extension recognition.Generic command for setting command history parameters.Generic command for showing command history parameters.Without an argument, history expansion is enabled.Show history expansion on command input.Set history expansion on command input.Generic command for showing things about the program being debugged.List the completions for the rest of the line as a command.Generic command for showing things about the debugger.Show the history of commands you typed. You can supply a command number to start with, or a `+' to start after the previous command number shown.Show what version of GDB this is.This value is used to set the speed of the serial port when debugging using remote targets.Show baud rate for remote serial I/O.Set baud rate for remote serial I/O.When enabled, each packet sent or received with the remote target is displayed.Show debugging of remote protocol.Set debugging of remote protocol.This value is used to set the time limit for gdb to wait for a response from the target.Show timeout limit to wait for target to respond.Set timeout limit to wait for target to respond.Generic command for setting gdb debugging flagsGeneric command for showing gdb debugging flagsExecute the rest of the line as a shell command. With no arguments, run an inferior shell.Edit specified file or function. With no argument, edits file containing most recent line listed. Editing targets can be specified in these ways: FILE:LINENUM, to edit at that line in that file, FUNCTION, to edit at the beginning of that function, FILE:FUNCTION, to distinguish among like-named static functions. *ADDRESS, to edit at the line containing that address. Uses EDITOR environment variable contents as editor (or ex as default).List specified function or line. With no argument, lists ten more lines after or around previous listing. "list -" lists the ten lines before a previous ten-line listing. One argument specifies a line, and ten lines are listed around that line. Two arguments with comma between specify starting and ending lines to list. Lines can be specified in these ways: LINENUM, to list around that line in current file, FILE:LINENUM, to list around that line in that file, FUNCTION, to list around beginning of that function, FILE:FUNCTION, to distinguish among like-named static functions. *ADDRESS, to list around the line containing that address. With two args if one is empty it stands for ten lines away from the other arg.Disassemble a specified section of memory. Default is the function surrounding the pc of the selected frame. With a /m modifier, source lines are included (if available). With a /r modifier, raw instructions in hex are included. With a single argument, the function surrounding that address is dumped. Two arguments (separated by a comma) are taken as a range of memory to dump, in the form of "start,end", or "start,+length". Note that the address is interpreted as an expression, not as a location like in the "break" command. So, for example, if you want to disassemble function bar in file foo.c you must type "disassemble 'foo.c'::bar" and not "disassemble foo.c:bar".Run the ``make'' program using the rest of the line as arguments.Show definitions of non-python user defined commands. Argument is the name of the user defined command. With no argument, show definitions of all user defined commands.Search for commands matching a REGEXPShow the max call depth for non-python user-defined commands.Set the max call depth for non-python user-defined commands.When 'on', each command is displayed as it is executed.Show state of GDB CLI command tracing.Set tracing of GDB CLI commands.Define a new command that is an alias of an existing command. Usage: alias [-a] [--] ALIAS = COMMAND ALIAS is the name of the alias command to create. COMMAND is the command being aliased to. If "-a" is specified, the command is an abbreviation, and will not appear in help command list output. Examples: Make "spe" an alias of "set print elements": alias spe = set print elements Make "elms" an alias of "elements" in the "set print" command: alias -a set print elms = set print elementsn >= 0 && n <= countargv (argv)Invalid command element name: %sInvalid command to alias to: %sMismatched command length between ALIAS and COMMAND.c_command != NULL && c_command != (struct cmd_list_element *) -1ALIAS and COMMAND prefixes do not match.The max call depth for user-defined commands is %s. Timeout limit to wait for target to respond is %s. Debugging of remote protocol is %s. Baud rate for remote serial I/O is %s. History expansion on command input is %s. Verbose printing of informational messages is %s. Script filename extension recognition is "%s". Error in regular expression: %sNo function contains program counter for selected frame.No function contains specified address.No symbol table is loaded. Use the "file" command.Junk at end of line specification.Specified start and end are in different files.Two empty args do not say what lines to list.No source file for address %s.No default source file yet. Do "help list"."set debug" must be followed by the name of a debug subcommand. "info" must be followed by the name of an info command. The "pwd" command does not take an argument: %sError finding name of working directory: %sWorking directory %s (canonically %s). source command requires file name of file to source.Argument required (%s)..pyinternalsObscure features.obscureAliases of other commands.user-definedSupport facilities.Status inquiries.Examining data.Running the program.script-extensionExit gdb.Print list of commands.Show verbosity.Set verbosity.verboseset history show history expansioninfShow all GDB settings.remotebaudremotetimeoutset debug show debug aproposmax-user-call-depthtrace-commandsargv != NULL./cli/cli-cmds.cInvalid command name: %sAlias already exists: %sc_command->prefixlist != NULLVerbosity is %s. REGEXP string is emptyNot a user command.Dump of assembler code for function %s: from %s to %s: End of assembler dump. Missing modifier.Invalid disassembly modifier.No frame selected.file: "%s", line number: %d %s is in %s (%s:%d). %s is at %s:%d. No line number known for %s.Cannot execute %s: %s Fork failedNo default source file yet./bin/ex%s +%d "%s"Working directory %s. offsoft CП$CП├CПalias_commandUsage: alias [-a] [--] ALIAS = COMMANDargv_to_dyn_stringstrictc->type == set_cmd./cli/cli-setshow.cfilename to set it to."on" or "off" expected.integer to set it to.integer %s out of rangeUndefined item: "%s".Ambiguous item "%s".c->type == show_cmdunlimitedoptionlist"on", "off" or "auto" expected.Requires an argument. Valid arguments are %s.only -1 is allowed to set as unlimitedgdb internal error: bad var_type in do_setshow_commanddo_show_command: invalid var_auto_booleangdb internal error: bad var_type in do_show_command╪j^+i^0l^иl^ l^Зm^jn^┌m^иl^0l^]g^Эh^Рp^rp^Zp^3o^╢p^╢p^╢p^╢p^3o^Zp^3o^╢p^hu^°t^╚t^pt^Ht^░s^░s^░s^pt^╚t^@u^░s^do_show_commanddo_set_commandSet logging optionsset logging Show logging optionsshow logging overwriteShow the logging output mode.Set the logging output mode.redirectShow the current logfile.Set the current logfile.Enable logging.Disable logging.gdb.txtDone logging to %s. Already logging to %s. set loggingCopying output to %s. ./cli/cli-logging.cRedirecting output to %s. The current logfile is "%s". Currently logging to "%s". If set, logging overrides the log file.Show whether logging overwrites or appends to the log file.Set whether logging overwrites or appends to the log file.If redirect is off, output will go to both the screen and the log file. If redirect is on, output will go only to the log file.The logfile is used when directing GDB's output.logging_no_redirect_file == NULLCurrent output protocol does not support redirectionCurrently logging to %s. Turn the logging off and on to make the new setting effective.The logging output mode is %s. Whether logging overwrites or appends to the log file is %s. "set logging" lets you log output to a file. Usage: set logging on [FILENAME] set logging off set logging file FILENAME set logging overwrite [on|off] set logging redirect [on|off] Future logs will be written to %s. Logs will overwrite the log file. Logs will be appended to the log file. Output is being sent only to the log file. Output is being logged and displayed. Output will be sent only to the log file. Output will be logged and displayed. handle_redirections@В^@Д^ Д^`Г^аВ^PВ^History value must have integer type.Convenience variable must have integer value. Args must be numbers or '$' variables.inverted rangenegative value%s="./mi/mi-out.ccol_namecolhdrbodynr_rowsnr_colsmi_console_file_set_raw: bad magic numbermi_console_file_delete: bad magic numbermi_console_file_flush: bad magic numbermi_console_raw_packet: bad magic numbermi_console_file_fputs: bad magic number./mi/mi-console.ccommand `%s' appears to be duplicated./mi/mi-cmds.cada-task-infoadd-inferiorbreak-afterbreak-conditionbreak-commandsbreak-deletedelete breakpointbreak-disabledisable breakpointbreak-enableenable breakpointbreak-infoinfo breakbreak-listbreak-passcountdata-evaluate-expressiondata-list-changed-registersdata-list-register-namesdata-list-register-valuesdata-write-memory-bytesdata-write-register-valuesenable-timingsenable-pretty-printingenvironment-cdenvironment-pwdexec-argumentsset argsexec-continueexec-finishexec-jumpexec-interruptexec-nextexec-next-instructionexec-returnexec-runexec-stepexec-step-instructionexec-untilfile-exec-and-symbolsfile-exec-filefile-symbol-filegdb-exitgdb-setgdb-showgdb-versionshow versioninferior-tty-setinfo-oslist-featureslist-target-featuresremove-inferiorstack-info-depthstack-info-framestack-list-argumentsstack-list-framesstack-list-localsstack-list-variablesstack-select-framesymbol-list-linestarget-attachtarget-detachtarget-disconnecttarget-downloadtarget-file-deletetarget-file-gettarget-file-puttarget-selectthread-infothread-list-idsthread-selecttrace-define-variabletrace-findtrace-list-variablestrace-savetrace-starttrace-statustrace-stopvar-assignvar-createvar-deletevar-info-path-expressionvar-info-expressionvar-info-num-childrenvar-info-typevar-list-childrenvar-set-formatvar-set-frozenvar-set-update-rangevar-set-visualizervar-show-attributesvar-show-formatvar-update-catch-unload-catch-load-catch-load/unload: Missing -catch-load/unload: Garbage following the ¤Ж├╚Л-inferior-tty-showinferior_tty_terminal-environment-directorysource-path-environment-path-inferior-tty-show: Usage: No args-environment-cd: Usage DIRECTORY-environment-pwd: No arguments allowed-environment-pwd: error finding name of working directory: %sPATHНЖПНЖП-var-set-update-range: Usage: VAROBJ FROM TO-enable-pretty-printing: no arguments allowedUnknown value for PRINT_VALUES Must be: 0 or "%s", 1 or "%s", 2 or "%s"-var-info-num-children: Usage: NAME.-var-update: Usage: [PRINT_VALUES] NAME.-var-assign: Usage: NAME EXPRESSION.-var-assign: Variable object is not editable-var-assign: Could not assign expression to variable objectMust specify the format as: "natural", "binary", "decimal", "hexadecimal", or "octal"Cannot specify format more than once-var-show-attributes: Usage: NAME.-var-info-expression: Usage: NAME.-var-list-children: Usage: [PRINT_VALUES] NAME [FROM TO]-var-show-format: Usage: NAME.-var-set-format: Usage: NAME FROZEN_FLAG.Usage: NAME VISUALIZER_FUNCTION.-var-set-format: Usage: NAME FORMAT.-var-delete: Usage: [-c] EXPRESSION.-var-delete: Missing required argument after '-c': variable object name-var-delete: Illegal variable object name-var-create: Usage: NAME FRAME EXPRESSION.-var-create: name of object must begin with a letterName="%s", Frame="%s" (%s), Expression="%s" -var-create: unable to create variable object-var-info-type: Usage: NAME.numchilddisplayhintin_scopeinvalidtype_changednew_typenew_num_childrenhas_morenew_childrenchangelistnaturaloctal-var-evaluate-expressionUsage: [-f FORMAT] NAMEGarbage at end of commandnoneditablelangpath_exprInvalid flag valueVariable object not found-var-delete: Invalid option.ndeleted--no-values--simple-values--all-values▌рЕUSAGE: %s [ [...]]breakpoint number argument "%s" is not a number.junk at the end of breakpoint number argument "%s".-break-watch: Missing -break-watch: Garbage following -break-watch: Unknown watchpoint type.Usage: tracepoint-number passcount-break-insert: Missing -break-insert: Garbage following breakpoint %d not found.-break-watchCould not find tracepoint %d-break-insert@╣^0╣^ ╣^╣^ш╕^╪╕^╨╕^P╣^НЖПiхЕ¤-Ж¤Ж╤ЧЪ+Ж╚,Ж▌рЕ├╚ЛiхЕ-stack-info-frame: No arguments allowed-stack-select-frame: Usage: FRAME_SPECUnknown value for PRINT_VALUES: must be: 0 or "%s", 1 or "%s", 2 or "%s"(values == PRINT_NO_VALUES && arg->val == NULL && arg->error == NULL) || values == PRINT_SIMPLE_VALUES || (values == PRINT_ALL_VALUES && (arg->val != NULL || arg->error != NULL))arg->entry_kind == print_entry_values_no || (arg->entry_kind == print_entry_values_only && (arg->val || arg->error))-stack-info-depth: Usage: [MAX_DEPTH]-stack-list-frames: Usage: [FRAME_LOW FRAME_HIGH]-stack-list-frames: Not enough frames in stack.-stack-list-locals: Usage: PRINT_VALUES-stack-list-arguments: Usage: PRINT_VALUES [FRAME_LOW FRAME_HIGH]-stack-list-arguments: Not enough frames in stack.!arg->val || !arg->error./mi/mi-cmd-stack.cunexpected what_to_list: %dsym2 != NULLUsage: PRINT_VALUESstack-argslist_args_or_localslist_arg_or_local-file-list-exec-source-files-file-list-exec-source-filemacro-info-file-list-exec-source-files: Usage: No args-file-list-exec-source-file: Usage: No args-file-list-exec-source-file: No symtab-data-disassemble-data-disassemble: Usage: ( [-f filename -l linenum [-n howmany]] | [-s startaddr -e endaddr]) [--] mode.-data-disassemble: Usage: [-f filename -l linenum [-n howmany]] [-s startaddr -e endaddr] [--] mode.-data-disassemble: Mode argument must be 0, 1, 2, or 3.-data-disassemble: Invalid filename.-data-disassemble: Invalid line number-data-disassemble: No function contains specified address╦^Ё╩^╨╩^░╩^@╦^▌рЕ> Жс╤КЁ1бЪрЕ-symbol-list-lines: Usage: SOURCE_FILENAME-symbol-list-lines: Unknown source file name.-target-file-delete: Usage: REMOTE_FILE-target-file-put: Usage: LOCAL_FILE REMOTE_FILE-target-file-get: Usage: REMOTE_FILE LOCAL_FILE-target-file-delete-target-file-put-target-file-getUsage: -info-os [INFOTYPE]mi1mi2mi3(gdb) unhandled MI version./mi/mi-interp.cthread-group-added,id="i%d"breakpoint-deleted,id="%d"tsv-deleted,name="%s" tsv-deleted traceframe-changed,endstartedrecord-%s,thread-group="i%d"thread-group-removed,id="i%d"memory-changedi%d0x%zxcmd-param-changedbreakpoint-modifiedbreakpoint-createdtsv-modified*running,thread-id="%d" %s^running *running,thread-id="all" stopped-threads*stoppedthread-group-exited,id="i%d"traceframe-changed,num="%d",tracepoint="%d" thread-group-started,id="i%d",pid="%d"tsv-created,name="%s",initial="%s" library-unloaded,id="%s",target-name="%s",host-name="%s"library-unloaded,id="%s",target-name="%s",host-name="%s",thread-group="i%d"library-loaded,id="%s",target-name="%s",host-name="%s",symbols-loaded="%d"library-loaded,id="%s",target-name="%s",host-name="%s",symbols-loaded="%d",thread-group="i%d"thread-group-exited,id="i%d",exit-code="%s"thread-exited,id="%d",group-id="i%d"thread-created,id="%d",group-id="i%d"-interpreter-exec: Usage: -interpreter-exec interp command-interpreter-exec: could not find interpreter "%s"-interpreter-exec: interpreter "%s" does not support command execution╨╙^ ╥^╥^└╤^╨^а╨^└╨^mi_interpreter_initmi_on_resumemi_new_threadInvalid MI commandInvalid option: %sframe-numberframe number is requiredtracepoint-numbertracepoint number is requiredPC is requiredpc-inside-rangeStart and end PC are requiredpc-outside-rangeLine is requiredInvalid mode '%s'+downloadsection-sizetotal-sizesection-senttotal-sent^exit ^error,msg="unknown errorcli=%s run=%s Invalid thread id: %dThread id: %d has terminatedInvalid frame id: %dUndefined mi command: (missing implementation)^done^connected-interpreter-execthread-selected,id="%d"%s %s&--reversereverse-finishreverse-stepireverse-nextireverse-nextCannot remove last inferiorfrozen-varobjspending-breakpointsbreakpoint-notificationsUsage: ADDR DATA [COUNT].Invalid argument-data-write-memory-data-read-memory-bytesUnable to read memory.-data-read-memorynr-bytestotal-bytesnext-rowprev-rownext-pageprev-pagebad register numbercoresInferior has no threads.Invalid identifier '%s'Thread group is emptyAlready in reverse mode.Optimized out./mi/mi-main.c-list-thread-groups-available-recurse-enable-timings: Usage: %s {yes|no}Usage: -trace-save [-r] filenametrace selection mode is requiredCould not find the specified line-trace-list-variables: no arguments allowedUsage: -trace-define-variable VARIABLE [VALUE],time={wallclock="%0.5f",user="%0.5f",system="%0.5f"} token=`%s' command=`%s' args=`%s' Cannot specify --thread-group together with --allCannot specify --thread together with --allCannot specify --thread together with --thread-groupCannot specify --frame without --threadInvalid thread group for the --thread-group option-remove-inferior should be passed a single argumentthe thread group id is syntactically invalidthe specified thread group does not existcannot remove an active inferior-add-inferior should be passed no arguments-list-target-features should be passed no arguments-list-features should be passed no argumentsHex-encoded '%s' must have an even number of characters.-data-write-memory: Usage: [-o COLUMN_OFFSET] ADDR FORMAT WORD-SIZE VALUE.Usage: [ -o OFFSET ] ADDR LENGTH.-data-read-memory: Usage: ADDR WORD-FORMAT WORD-SIZE NR-ROWS NR-COLS [ASCHAR].-data-read-memory: invalid number of rows.-data-read-memory: invalid number of columns.-data-evaluate-expression: Usage: -data-evaluate-expression expression-data-write-register-values: Usage: -data-write-register-values [ ... ]-data-write-register-values: No registers.-data-write-register-values: No regs and values specified.-data-write-register-values: Regs and vals are not in pairs.-data-list-changed-registers: Unable to read register contents.-thread-list-ids: No arguments required.-thread-select: USAGE: threadnum.Usage: -target-detach [pid | thread-group]Invalid syntax of thread-group id '%s'Non-existent thread-group id '%d'Target %s does not support this command.-data-list-register-values: Usage: -data-list-register-values [...]only '0' and '1' are valid values for the '--recurse' optioninvalid syntax of group id '%s'Non-existent thread group id '%d')4У)4У)4УsПsПVEC_int_quick_pushVEC_osdata_item_s_quick_pushАД.AUndefined MI command: %s--all --all--thread-group Invalid thread group id--thread-group--thread Duplicate '--thread' option--thread--frame Duplicate '--frame' option--frameDuplicate '--thread-group' optionInvalid value for the '%s' optionProblem parsing arguments: %s %smi_getopt_long: oind out of bounds%s: Option %s requires an argument./mi/mi-getopt.c%s: Unknown option ``%s''XTERMSRCASM░B_░B_рB_`C_wB_pC_pB_АB_v~Пz~ПCДПгMЛtui_file_get_strbuf: bad magic numbertui_file_rewind: bad magic numbertui_file_put: bad magic numbertui_file_adjust_strbuf: bad magic numbertui_file_isatty: bad magic numbertui_file_flush: bad magic numbertui_file_delete: bad magic number./tui/tui-file.c(y or n) Please answer y or n. tuitui_exec called./tui/tui-interp.cZ_@Y_Y_рX_└X_X_Cannot create pipe for readlineCannot redirect readline output Display all %d possibilities? (y or n)^?Change the layout of windows. Usage: layout prev | next | Layout names are: src : Displays source and command windows. asm : Displays disassembly and command windows. split : Displays source, disassembly and command windows. regs : Displays register window. If existing layout is source/command or assembly/command, the register window is displayed. If the source/assembly/command (split) is displayed, the register window is displayed with the window that has current logical focus. Toggle between Source/Command and Disassembly/Command layouts. Toggle between Source/Command or Disassembly/Command and Source/Disassembly/Command layouts. Usage: layout prev | next | layoutAmbiguous command input.SPLIT$REGS$GREGS$FREGS$SREGSPREVInvalid layout specified. %sy_(y_└x_Иx_pw_TUI commands to control the register window.Display only floating point registers.Display only general registers.Display only system registers.Display only floating point registers Display only general registers Display only special registers Scroll the registers window forward Scroll the register window backward "tui reg" must be followed by the name of a tui reg command. [ Register Values Unavailable ]tui reg generalDisplay next register group.frgr+rRegister group: %s%-6dLine number %d out of range; %s has %d lines. Update the source window and locator to display the current execution point. No process(SingleKey)In: %s%*.*s* %s%*.*s Line: set width %dset height %dText User Interface commands.TUI configuration variablesset tui show tui tabsetwinheightwhfocusborder-kindactive-border-modeUsage: w <#lines> Focus set to %s window. %s (%d lines) halfhalf-standoutboldbold-standoutRefresh the terminal display. Set the width (in characters) of tab stops. Usage: tabset Set the height of a specified window. Usage: winheight [+ | -] <#lines> Window names are: src : the source window cmd : the command window asm : the disassembly window regs : the register display List of all displayed windows. Set focus to named window or next/prev window. Usage: focus { | next | prev} Valid Window names are: src : the source window asm : the disassembly window regs : the register display cmd : the command window Scroll window forward. Usage: + [win] [n] Scroll window backward. Usage: - [win] [n] Scroll window forward. Usage: < [win] [n] Scroll window backward. Usage: > [win] [n] XDB compatibility command for setting the height of a command window. Usage: w <#lines> This variable controls the border of TUI windows: space use a white space ascii use ascii characters + - | for the border acs use the Alternate Character SetShow the kind of border for TUI windows.Set the kind of border for TUI windows.This variable controls the attributes to use for the window borders: normal normal display standout use highlight mode of terminal reverse use reverse video mode half use half bright half-standout use half bright and standout mode bold use extra bright or bold bold-standout use extra bright or bold with standout modeShow the attribute mode to use for the TUI window borders.Set the attribute mode to use for the TUI window borders.This variable controls the attributes to use for the active window border: normal normal display standout use highlight mode of terminal reverse use reverse video mode half use half bright half-standout use half bright and standout mode bold use extra bright or bold bold-standout use extra bright or bold with standout modeShow the attribute mode to use for the active TUI window border.Set the attribute mode to use for the active TUI window border.The attribute mode to use for the active TUI window border is "%s". The attribute mode to use for the TUI window borders is "%s". The kind of border for TUI windows is "%s". Invalid window height specified. %sInvalid window specified. The window name specified must be valid and visible. Incorrect Number of Arguments. %sUsage: focus { | next | prev} %s (%d lines) Usage: winheight [+ | -] <#lines> Tab widths greater than 0 must be specified."tui" must be followed by the name of a tui command. ╪┴Чч╤Е╖DЖыв]ИПqП@ИПEИПSИПXИП[ No Data Values Displayed ]Unable to Allocate Memory for Source or Disassembly Display. line->line_or_addr.loa == LOA_LINE || line->line_or_addr.loa == LOA_ADDRESSl.loa == LOA_ADDRESS || l.loa == LOA_LINEcontent_loa.loa == LOA_LINE || content_loa.loa == LOA_ADDRESS./tui/tui-winsource.c[ No Assembly Available ][ No Source Available ]tui_update_breakpoint_infotui_set_is_exec_point_attui-switch-modegdb-commandnext-keymap\C-xTUI mode not allowedinfo localswherecpQПd╠7Нf~QПnб[Еr╧QПs╪QПu╫╖вvkХПwwХПStart a Python interactive prompt. Python scripting is not supported in this copy of GDB. This command is only a placeholder.Evaluate a Python command. Python scripting is not supported in this copy of GDB. This command is only a placeholder.Prefix command for python preference settings.none == no stack or message will be printed. full == a message and a stack will be printed. message == an error message without a stack will be printed.Show the mode of Python stack printing on error.Set mode for Python stack dump on error.Python scripting is not supported in this copy of GDB.gdbpy_breakpoint_has_py_cond called when Python scripting is not supported.gdbpy_should_stop called when Python scripting is not supported.python-interactiveshow python set python print-stack./python/python.c└ЩП┼ЩП╩ЩПnonefullmessagegnu-indirect-function "%s" has changed its resolved function_address from %s to %sb->type == bp_gnu_ifunc_resolver_returnhandle_inferior_event: Invalid gnu-indirect-function breakpoint type %db->type == bp_gnu_ifunc_resolvercurrent_program_space == b->pspace || b->pspace == NULLb_return->type == bp_gnu_ifunc_resolver_returnb_return->loc != NULL && b_return->loc->next == NULLframe_id_p (b_return->frame_id)b_return->related_breakpoint == b_returnLoadable section "%s" outside of ELF segmentsSection index is uninitializedsect_index_rodata not initializedelf/stab section information %s without a preceding file symbolduplicated elf/stab section information for %sFile "%s" has no build-id, file skippedFile "%s" has a different build-id, file skippedelf/stab section information questionable for %self/stab section information missing for %sReading minimal symbols of objfile %s ... Can't read symbols from %s: %sDone reading minimal symbols. "%s": separate debug info file has no debug infoelfread.cprobes_per_objfile != NULL.stab.stab.index.mdebugb->loc->next == NULLentry_p != NULL%s@got.pltBbss.bssDdata.dataDrodata.rodata@plt/.build-id/.got.plt.stabstr`ч_ `0∙_ЁGgў_░*g└аПрЩТ@Ў_Ёї_░я_`ь_elf_get_probeself_gnu_ifunc_resolver_return_stopelf_gnu_ifunc_resolver_stopelf_gnu_ifunc_resolve_by_cache`ч_ `0∙_ЁGgў_░*g└аП`╡Х`ч_ `р∙_0∙_ЁGgў_░*g└аПрЩТPш_ ч_0ч_@ч_Рч_**s == '='stap-probe.csel >= -1No SystemTap probe at PC %spc_probe->objfile != NULLpc_probe->objfile->sf != NULLNo frame selectedstap-expression_probe_argc_probe_arg0_probe_arg1_probe_arg2_probe_arg3_probe_arg4_probe_arg5_probe_arg6_probe_arg7_probe_arg8_probe_arg9_probe_arg10_probe_arg11SemaphoresemaphoreCannot parse expression `%s'..stapsdt.base!probe->args_parsedp.inside_paren_p == 0-pstap-probe-stapInvalid opcode in expression `%s' for SystemTapprobeprobe_generic->pops == &stap_probe_opspc_probe->objfile->sf->sym_probe_fns != NULLInvalid probe argument %d -- probe has %d arguments availableInvalid probe argument %d -- probe has %u arguments availableWhen non-zero, the internal representation of SystemTap expressions will be printed.Show SystemTap expression debugging.Set SystemTap expression debugging.Show information about SystemTap static probes. Usage: info probes stap [PROVIDER [NAME [OBJECT]]] Each argument is a regular expression, used to select probes. PROVIDER matches probe provider names. NAME matches the probe names. OBJECT matches the executable or shared library name.Could not read the value of a SystemTap semaphore.Could not write the value of a SystemTap semaphore.Invalid register displacement syntax on expression `%s'.Missing register name suffix `%s' on expression `%s'.Missing indirection suffix `%s' on expression `%s'.Invalid operator `%c' for register displacement on expression `%s'.Invalid constant suffix on expression `%s'.Unknown numeric token on expression `%s'.Operator `%c' not recognized on expression `%s'.Missign close-paren on expression `%s'.Invalid operator `%c' on expression `%s'.could not obtain base address for SystemTap section on objfile `%s'.corrupt probe name when reading `%s'corrupt probe argument when reading `%s'could not parse SystemTap probe(s) from inferiorSystemTap Probe expression debugging is %s. unrecognized bitness `%c' for probe `%s'before conversion to prefix form°`е`е`е```е`е`е`0`@`е`P`е```е`е`е`е`е`е`е`е`е`е`е`е`p`а`╕`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`р`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`е`р``(` (` (` (``(``(` (` (` (``(``(` (``(` (``(` (` (` (` (` (` (` (` (` (` (` (` (``(`H(``(` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (``(` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (` (``(`)`╖(`╖(`╖(`)`)`╖(`╖(`╖(`)`)`╖(`)`╖(`)`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`)`)`)`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`)`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`╖(`)`@.`└)````4`Ё3`@3`Ё`а`р`0``р`└`compile_probe_argcompute_probe_argstap_gen_info_probes_table_valuesVEC_const_char_ptr_quick_pushVEC_info_probe_column_s_quick_pushstap_probe_destroystap_clear_semaphorestap_set_semaphorestap_compile_to_axstap_parse_probe_argumentsstap_parse_argumentstap_get_opcodeVEC_stap_probe_arg_s_quick_pushVEC_stap_probe_arg_s_indexstap_evaluate_probe_argumentstap_get_probe_argument_countstap_relocateVEC_probe_p_quick_pushИвППвПVEC_probe_ops_cp_quick_push(undocumented errno %d)c-exp.ytoken %s (nterm %s (Stack nowDeletingNumeric constant too large.! macro_original_textInvalid number "%s".Unmatched single quote.Empty character constant.Invalid character constant.static_castconst_castStarting parse Stack size increased to %lu Entering state %d Reading a token: quick_insertNow at end of input. Next token isShifting $%d = %s is not an ObjC ClassNo file or function "%s".long double new new[] delete[]==!=&&||->*-> $$ =syntax errorError: discardingError: poppingmemory exhaustedCleanup: discarding lookaheadCleanup: popping>>=<<=+=-=*=/=%=|=&=^=.*sizeofand_eqbitandbitorcomplnot_eqxor_eq__typeof____typeof__decltype$end$undefinedCHARUNKNOWN_CPP_NAMETYPENAMECLASSNAMEOBJC_LBRACNAME_OR_INTOPERATORCLASSCOLONCOLONTEMPLATENEWSTATIC_CASTCONST_CASTSIGNED_KEYWORDSHORTINT_KEYWORDCONST_KEYWORDVOLATILE_KEYWORDDOUBLE_KEYWORDTRUEKEYWORDFALSEKEYWORD','ABOVE_COMMA'?'ORORANDAND'|''^''&''<''>''@''+''-''*''/'UNARY'.''[''('DOT_STARARROW_STARBLOCKNAMEFILENAMEDOTDOTDOT'!''~'']''{''}'$accepttype_expexp1$@1$@2$@3msglistmsgarglistmsgarg$@4$@5lcurlyrcurlystring_expqualified_namespace_identifierconst_or_volatilecv_with_space_idptr_operator$@6$@7ptr_operator_tsdirect_abs_declarray_modfunc_modtypebaseparameter_typelistnonempty_typelistptypeconversion_type_idconversion_declaratorconst_and_volatileconst_or_volatile_nooptname_not_typenameA %s in expression, near `%s'.\x escape without a following hex digit\%c escape without a following hex digitparameter types following 'void''void' invalid as parameter typeUnterminated string in expression.Invalid character '%c' in expression.Reducing stack by rule %d (line %lu): Undefined string concatenation.unrecognized type in string concatenationNo function "%s" in specified context.@entry can be used only for function parameters, not for "%s"No symbol "%s" in specified context.`%s' is not defined as an aggregate type.No type "%s" within class or namespace "%s".No symbol "%s" in current context.const_or_volatile_or_space_identifier_nooptconst_or_volatile_or_space_identifier7`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`7`7`7`7`7`7`7`7`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`╕7`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`А8`Ч6`Ч6`Ч6`Ч6`░8`р8`Ч6`Ч6`9`@9`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`Ч6`p9`Ч6`Ч6`Ч6`а9`Ч6`╨9`╕7`:`Ч6`0:`N`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`?N`?N`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`?N`ON`дL`ХI`ХI`ON`ON`дL`┘N`ЧN`ON`ON`кN`ON`дM`ON`╕M`╕M`╕M`╕M`╕M`╕M`╕M`╕M`╕M`╕M`ON`ХI`ON`ON`ON`ON`O`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ШL`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ШL`ХI`ХI`ХI`ХI`ХI`┘N`ХI`ЧN`ON`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ХI`ШL`ХI`ХI`ХI`ХI`ХI`ON`ON`ON`ON`5b`Wb`fb`Йb`TX`Шb`зb`╢b`┼b`╒b`хb`їb`c`c`%c`5c`Ec`Uc`|c`йc`шc`d`d`7d`dd`гd`╝d`╦d`┌d`щd`Ue`Ыe`se`Сe`▄e`·e`TX`TX`TX` f`f`.f`?FGHLMNOPQ╠?╫╫}lМ▄K╠/&'()*+ /0└6┼ l () K 6 EUGEG┬/ =/$%&'()*╙#/:UJKJKJUO()7>> /7:╨O:/XC:JVOCєJKT@МНRU%&'рсщИЙКЛK═RO R/жgийклмноп░▒▓│┤╡╢╖╕╣║╗╝╜зg%'├─└RK)┼(└$╩/'┼?$╩┴' ▄ !▌O▀рс%@'▌ @ U RUh 7%&'' : 'R'O'#()X ' -.COCR7+R-.OU@UUCr7U;'OFG;;EABCI;FGER'KI''OPSTUWRc/R URCDEFGUIJKLMNzVU~АБ U ;KI╚ K"#$%&'()*+O-.@ABCDEFG7IJKLMNKK@ABC╙rFG┬Kщ╒OP ST W "#$%&'()*+ -.IJKLMN 7FG IJKLMNABC FG K OP ST W $%&'()*+ -.$% ' * 7 ABC FG K OP ST W + -. 7 ABC FG K OP ST W + -. 7 ABC FG K OP ST W $%&'()* , / 1 3456789:;<=>?ABCDEFG JK MN ST , 123456789:;<=>?@ABCDEFG IJKLMN V $%&'()* $%&'()* 7 ABCDEFGCIJKLMNJK R , Q123456789:;<=>?@ABCDEFGIJKLMN R>?@ABCDEFG IJKLMN , 123456789:;<=>?@ABCDEFGIJKLMN R , 123456789:;<=>?@ABCDEFGIJKLMN R , 123456789:;<=>?@ABCDEFGIJKLMN R , 123456789:;<=>?@ABCDEFGIJKLMN R , 123456789:;<=>?@ABCDEFGIJKLMN R , 123456789:;<=>?@ABCDEFGIJKLMN 23456789:;<=>?@ABCDEFGIJKLMN456789:;<=>?@ABCDEFGIJKLMN 56789:;<=>?@ABCDEFGIJKLMN 6789:;<=>?@ABCDEFGIJKLMN 789:;<=>?@ABCDEFGIJKLMN 89:;<=>?@ABCDEFG IJKLMN :;<=>?@ABCDEFG IJKLMN $%&'()*"#$%&'()* @ $%&'()*J2╬3@Aя~tttt4щ4tuwy{8∙CЗE3жЫЬЭЮЯаlДгд╧ ╧ у╟*no╬q !r noFq╞Gr хKtbt╧█▐$.nopq═Fr !"$fжИ5╥╙╥?ф9Е !╨@Aж╨Й6sК.,╤ЛцGsRV╥╙▌О °·:eАБВLMщЇїЎўМ╬snovqs.r Д 3ЁЦё'(tГНЩ tЪЫ !ЧtжШ+$е╔0"no╟q╩┌r tsttt√╦№DnoxqП r тnozqшчr Жыьэnoamr ОПВюЄ єHI ¤■s╟ !,1jk╤s=B╨E#T$%sзNО OP╤m&QWUsuvXYt'()tZ*+t\^,y_`-.di/0Щ l1gВhpno)oqr ╗╝╜╛┐w└┴┬├─┼Иz{зЙКЛМ | } ~x/ !"#s$%╕╣║╗╝╜╛┐&└┴┬├─┼АБО '();З*+Р%з,SЖ>-./0з1 !"#$%└┴┬├─┼&╛┐└┴┬├─┼'()*+,-./01 С !"#$%ТУФХ&'()*+,-./01 | #$%&'()*+}-./01 | #$%&'()*+,-./0K1LMN !"OPQRSTUVWXYZ[\]^з_`abcdefghijkийклмноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐└┴┬├─┼зK╧cK !" !"╨з╣║╗╝╜╛┐╤└┴┬├─┼╥╙з:иЕйклмноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼[╢╖╕╣║╗╝╜╛┐└┴┬├─┼ийклмноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼]ийклмноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼Нийклмноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼Оийклмноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼Пийклмноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼Ризйклмноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼клмноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼мноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼ноп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼оп░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼п░▒▓│┤╡╢╖╕╣║╗╝╜╛┐з└┴┬├─┼░▒▓│┤╡╢╖╕╣║╗╝╜╛┐└┴┬├─┼▓│┤╡╢╖╕╣║╗╝╜╛┐└┴┬├─┼KK !" !"KО !"rRUV_bS√■ОTr╕║РСП╬╧йXcdr№f23aWmtr╞Н═u¤o0!#%О╨╤уюрыъ▌█▄чцстщшхф╓╫╪┘┌эьяЁ▀▐╔Її∙мў°Ў·лпо▓▒╡┤r╛└┴┐╖■№nrrrrr└┴╣ШФЩТкзег╦╠ .4`r╝╜|zr~А╟БДЖh3jєЄё╔╚н░│╢ЯЦжrЭХЧУбЬЪид; QPNMLKJEDHIGFCB<@A=>?ў3─┬78ipsqИ}wЗЛxrГЕYk()'╘╥╒╙x╩ZаЮвЫ: rr95Кv{ЙВМw1l-,"*$&╗O/6├┼y+[]\^YZZ[[[[\\]]]]]]]]]]]]]]]]]]]]]]]^]_]`]aabbcccd]e]fggg]h]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]ii]]]]jjjkklllkkkmnnoppqqsrtrrruvvvwwwwwxxxxyyz{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{||||}}~~АББВВГГГДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЕЕЕЕЕЕЖЖЖЖ, , ї , , , и , F, , , : ╚, , , g , 5 , ├ Gб , , , хэ- . Й а√, , , ╫, M · н 2бв5▀рсHIJ#▄6╚-789:╠;<=n╘r7╒╓╫╪┘>?Г<&@mъABCKD "#$%&'()*+-.7ABCFGKOPSTWZ[\]fijklnopz{ВГДЖKK ] ,/13456789:;<=>?ABCDEFGJKMNST{А OДЕЕЕЕ K] %&'|OЖЕ::::KK%&|$%'*$')(]]]]]][\]]/,123456789:;<=>?@ABCDEFGIJKLMN[]g@m{p7CJKruvwxy!ЕeTЕ^_`UJJURrБz%'':[[[[]z]%'''$'''RR]\]]]]]]]]]]]]]]]]]]]]]] lЕ\dz}~]]lЕXh/hЕ nГUrtURv}CwKxyRgЕ/VabcЕaaUUUUCБR'z;;;;RRR''']UVUgR/]]UpqURRsRЕ]]UcЕVUU;KKKK]RnQzq]]]]]RRRRh╕П+l╕П+ю╖П;$ёBЖ?$p╕П+s╕П+v╕П+y╕П+|╕П+╕П+В╕П+Е╕П+ ЗБЦ8$eKЕ7$╥°О<$ш╖П0$ы╖П/$йqО$dлМ6$СРЧ5$т╖П2$х╖П1$m╕П4$i╕П3$И╕П:$└вQйвПlв({`Ех┐в#Л╕П┼╖П)╫К-тlв╠°ОУ Р%oХ'·ДМ Р$╫К,▓эН&═╖ПеmОчМУа∙О0$Т╕П+Щ╕П&а╕П|ж╕П~1Ц!м╕П1$м∙О/$┤╕П+Ц^│╕П+ ▐╢П=Т╥╢ПH=Т║╕П!^┼╕П!^╟╕П!^╬╕П"_╨╕П"_scan_macro_expansionVEC_token_and_value_quick_pushVEC_token_and_value_quick_insert!'./48<@DHLPTX\`fmwГЙРЪвжк┤│╩╔┘╪суцчъьюїЄ¤№"47>BFLPTX\`dhlptx|АДИМРФШЬажн╢┴╚╧╥╪▀щэёї№ @IPYagqАЦе╜╞╟у!$%)*/.2146:CEFIKRY_fhjlpr~ВДИМРФШЬадим░┤╕╝└─╚╠╨╘╪▄рфшьЁЇў№ !&,048?CEIJRZegpv}~ЕЙКНОСХЧЫЭЯбгезйлнп▒│╡╖╣╗╜┐┴щыэяёєїў∙√¤ !"*6 !$'*-0369<?CHLPTX]aeinstz{БВИКМОСХШЫЬвгйлмо▓╕║╛├╚╠╨╘╪▄рфшьЁЇ°№"&(*,.0249>FNV^`cegikmosvz~ГЙЛОРУХЦЪЬЮабвзимо▒│╢╕║╛┴├╞╚╦╬╥╓┘▌▀сухчъюёї∙¤"&+.259<@BEHKORUY\_cfimpruw}АГЕЗЙЛНСУЧЩЬЯагжйлнп▓╡║┐─╔╠╧╥╒╪█▐сфчъэЁєЎ∙№ "&)+-/13579;Z \ [ z "K]R "KzR #K]R ] \/] C] 7] B] A] S] T] G] F] ]G ]F ] ]NЕ ]NЕ ]N ]Nl ]M] ]IЕ ]IЕ ]I ]Il ]L] ]J\U ]\U ^aU _aU ]`aU Е b c bc ЕV] V] /] ]KdgR KegR W ] g/] ]K}Rn X fgh f[h] K[R] K\R ]@] ]C] ]D] ]E] ]A] ]B] ]?] ]>] ]9] ]8] ]=] ]<] ]:] ];] ]7] ]6] ]5] ]4] ]3] ]2]V] ]1] ],] k + KЕR KzR :[;K]R :[;K]R :[;K]R :[;K]R i i - . O P jЕ Ж! jЕ Е TЕ ЕЕ l Ж Ж @ Г nmn o Г p rCsq Ctq 7 7r r uw u w KvR wx x wy y JU U JU U KR K}R ' % & %' %$' %$ $%' %' %' % %% %%' %%$' %%$ $%% $%%' %% %%' %% %%' &' &$' &$ &' & &' * %* Е Е Е Е Е Е Е Е | $| $ Е:z; p{ {p ' % & ~ ~/Q z ~/z { v {Б rБ () )( В ( ) JU JU U U A B C D E 6 7 5 T S 1 : ; , ? > 9 8 = < 4 3 G F / M N KR JU U А O Д O Д VEC_type_ptr_quick_pushчМУ┘╕ПпEО▐╕ПO▐С@У@У°?УЎ?У╠?Ущ╕ПЦуЕю╕ПUН ╕П╣П╣П╣П)╣П∙^Е2╣П;ГМ1ГМ?У╠Ф8╣ПC╣ПtНL╣П@збP>У>>УP╣П\╣ПE╜Е'@У1@Уg╣Пy=Уv╣П|╣ПИ╣ПЦ╣Пз╣ПY6Р =У╢╣П┬╣П╧╣П╙╣ПяаП▀╣Пу╣Пш╣Пя╣Пє╣Пў╣ПD<УG<У√╣П ╣Пr<Уh<У╒;У╦;У║П║П║П║П║П▀dО°>У╙>У║П║П!║П%║П)║П2║П╫┤Р=║ПG║ПP║П╗kдZ║П^║Пb║П'&Чf║Пj║Пn║П5aОv║П║ПXьРД║ПИ║ПМ║ПР║ПШ║Пг║Пк║По║П▓║Пf7Р╣║П└║П╚ЄХFЖ╦║П┌║Пы║П¤║ПШ╛П╚╛П╗П╗П╗П#╗П:╗П3╗ПC╗ПM╗П-{ТV╗ПШыК_╗Пr╗ПД╗ПК╗ПЭ╗П│╗П╞╗ПчМУmФ▐╗Пp╕Пs╕Пv╕Пy╕П|╕ПЎ╜Цl╕Пh╕ПЎ╜ЦЎ╜ЦВ╕П╕ПЕ╕Пcp-name-parser.yempty character constantparse errorinvalid character constant(anonymous namespace)-in-unsigned longunsigned long longinvalid numberunexpected string literalinvalid characterconstruction vtable for covariant return thunk to reference temporary for typeinfo for typeinfo fn for typeinfo name for wchar_tglobal constructors keyed to global destructors keyed to guard variable for boolVTT for non-virtual thunk to delete delete[] unsigned charunsigned shortsizeof %s, near `%s░Р`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`У`У`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`У`П`0С`ЧН`ЧН`С`└Р`XС`hТ`╨О`░Т`(Т`╨О`0П`О`рТ`7О`7О`7О`7О`7О`7О`7О`7О`7О`7О`@Р`ЧН`Р`╚П`ИП`аР`аР`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`аР`ЧН`аР`pР`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`ЧН`аР`шС`аР`аР`ДШ`БЧ`PШ`aЦ`Ч`хЦ`MЧ`чН`:Ц`Ц`чН`чН`чН`щХ` в` в`E╣` в` в` в`4╣`#╣`╣`╞╕`Е╕`U╕`об`&╕`╕`ы╖`╧╖`│╖`Ч╖`{╖`_╖`▌╝`┴╝`е╝`Й╝`m╝`Q╝`5╝`╝`¤╗`с╗`┼╗`к╗`О╗`r╗`V╗`:╗`╗`╗`ц║`╩║`о║`Т║`v║`Z║`>║`"║`║`щ╣`╝╣`Я╣`r╣`U╣` в`╚о`Йо` в`xо`[о` в`>о` в` в` в` в`-о`о` в`рн`Тн`bн`н`Єм`╔м`Дм` в`hм`1м`·л` в`╤л`Эл`Xл` к`?к`к`╧й`Шй`Ий` в`xй`hй`Xй` в`╜к`нк`Эк`Нк`▀к`╧к`як` в`-й`й`¤и`ци`╧и`╕и`би`Ки`Iи`и`┬з`oз`Oз`/з`з` в`Ўж`█ж`sж` в`Uж`:ж`ж`пж`Ож`└ж`ъе`Ме`Oе`°д`т┤`┤`?┤`■│`┴│`А│`$│`у▓` в`╟▓`Я▓` в`В▓`Z▓`.▓`▓`┌▒`о▒` в`o▒`3▒`▒`у░`╖░`М░`]░`L░` в`-░`Ўп`┐п`дп`Йп`3п`ъо`Nп`$╖`щ╢`╩╢`л╢`М╢`/╢`╢`ё╡`╥╡`│╡`Ф╡`u╡`V╡`m╢`N╢`7╡`&╛`╛`ш╜`╔╜`к╜`Q╜` в` в`6╜`∙╝`E╛`▌┐`╙┐`╔┐`й`┐┐`й`й`й`й`й`й`й`╡┐`й`й`й`▌┐`л┐`╔┐`й`┐┐`й`й`й`й`й`й`й`╡┐`й`й`й`д┐`Э┐`<┐`й`5┐`й`й`й`й`й`й`й`&┐`? -!? Ё ? ? ? ? ? ? ? ? ? ? ? :? ? ? № ? ? tъ ? 07tw? Їt'? ? Ж? t? 0B$? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "? ? Ff? ? ? Q? ? Ж? tb? 7b4? ┌ ? ? b!? ? s? ? Btt? ? ? Ab? ? ┌ ? 3b7? ┌ ? ┌ ? ? 8SW[? ? Ч ╞? И? ? K`? ? ? ? C? ? d? BntjВ!ts? й? з? ? ? ? t? ? ? E╬л? ? ? ? ? м? ____? ╫ ╫ ╫ пМnРЖ? ? ╖╣? ? ? ? t? t? t? ? ? %? ╬? ╬Ш┌ ЩСТУЬ? ? ? ╢а╖═тЎQQww44╫ ╫ ╫ ? ? ? ? ? ? ? б? ? ? ? ? ? ? Гад? в╫ И ? ? ььь? И┴╟╚? ? ? H?1I)=;*J4+5,:DF0/G !"#$%&'(-.236789@ABEb'г'''лx'CE~DА #I*'' /.4*I*1.√5¤5==DbF`IU4`F4W=ю|[ё=є=`x=D|1u~DА|m|)==ssGusGD(G||IР=I=zКЛМ4GЙG4G4РF)*зи)_Щ9:;Ь fббЙ╗дЬFзи╗F)╗нп┐Щ{) )╗╗╧┐))║.)555╔))I╙╬╧╓╫╪┘┌█▄▌▐▀рстуфхцч╔√N¤*╬ I)¤√I¤))U]"%`#&∙√√¤¤,╙ `| zU∙% ! [ e Н%Р Y $%6uЬ дези no п< Н 1 ║GHI ┐ 1 = ┼╞╟╚ D =╧I 1 D G I=>?=г C E D лG I┼╞╟╚ Ё ╢ °╙ !" $% Ї ;<=>?1 C%E ю <ё є GHI !" $% 1 < GHI$% 1 !" <) GHI !"# *+ -./0123456789 ;<=>?@A DEGHI !"4 6789);<=>? 1C E = D I !" &' !" &' GI ,-./01234 6789 ;<=>?G IC E 1J = D G I !" &' !" # *+G-./0123456789 ;<=>?@A DEGHI !" !",-./0123456789 ;<=>? C E,-./01234 6789 ;<=>? C E./01234 6789 ;<=>? C E/01234 6789 ;<=>? C E01234 6789 ;<=>? C E1234 6789 ;<=>? C E234 6789 ;<=>? C E89 ;<=>? C E ▓,.+x-fbЯVP`кЄy{W S}ў╜|ш]щ▓Z─ghneСgwz)iкQR┤,УU╙e╙gXigVT'╘(эпYktлgZg▒аb[С*`tЦ*tЬл!xе"ю#Ч]╝юФyX╗┬Х├└g╢|нШлY╣║е-ZЩwz[╒╡ю┼юi╦╠═╞ ╟ ╚]ъ єЇ└їёо >?@h+│,Ё╩y]iы]]└яЎ¤ V°╗^ь∙╛ jwz} ]O).ij2/01 8<9С ] yjyР*:A└¤;¤dBCЪмlq^or wzwzТ 45░┴ pБВjР&7Ги,-ДЕЖ3иV╨]^пЮЗИ=иjst^j^^╖╕s^Кt╧XjЛМН^XYZY^дXZuхцчYЮшщZЮ┐╧╧╧╧j·БВмРГ/ДЕЖ ЗИ%уфхцчЙш^щЮКЮЮБВЛМНГ/ДЕЖ ЗИБВГ╬ДЕЖК/ЛМНЗИ ╬ вКг/01ЛМН 23456789:;<=>?@ABCDEFGHIJKLMб в▐▀рстгуфхцчXшщYZд st╔╓╫╪┘┌█▄▌▐▀рстуфхцчшщX6YZ√ /01 $ 23456789:;<=>?@ABCDEFGHIJKLM/ m╓╫╪┘┌█▄▌▐ ▀рстуфхцчшщ╓╫╪┘┌█▄▌▐▀рстуфхцчшщ╪┘┌█▄▌▐▀рстуфхцчшщ┘┌█▄▌▐▀рстуфхцчшщ┌█▄▌▐▀рстуфхцчшщ█▄▌▐▀рстуфхцчшщ▄▌▐▀рстуфхцчшщстуфхцчшщ;a`cd_\[ikZmhbl52Cy@=]eguМD4}A +('$#&%"!*)-0j 7oXЗЖЙx:1B8Х?АНВЦ╛┐┴┬IKO|3/,.nYrmXАPXЛИДЕ EGzv9АЬЭ БФДЪЫMгедМЯHL6XsXWXQГp~УАПбЮJ║╣╕╖╢▓▒╡┤│░пноклм╝╗qVUTRКОЩСТЧШ└NжаSРв╜зйиKLMMMNNOOOOOPPQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQRSSSSTTTUUVVVVWWXXYYZZZZ[\\]]]]]^^^^^___``aaabbccccccddeeeeeeeffffgghhhhhhhhhhhhiiijjjjkkkkkllmmnnnnooooopppppqrrrrqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq? ? 9? ? ? ? ? ▐ ш ЦЭ/? щ k ? ╥╨? ╘ё Я ╝ю э еЧ@ ? К? · a Ы\v№N!ОПж_Э"#$%&зa'й~c(■ А╤╥ make_dtormake_operatormake_namemake_builtin_typefill_compError in expression, near `%s'.flex scanner push-back overflowout of dynamic memory in yyensure_buffer_stack()out of dynamic memory in yy_scan_buffer()out of dynamic memory in yy_scan_bytes()out of dynamic memory in yy_create_buffer()Invalid digit `%c' in based literalFunction name "%s" ambiguous hereCould not find renamed variable: %sInternal error in encoding of renaming declarationimpossible value from ada_parse_renamingInvalid attempt to select from type: "%s".No definition of "%s" in current context.No definition of "%s" in specified context.Could not find renamed symbol "%s"Based real literals not implemented yet.ill-formed or non-terminated string literalambiguous attribute name: `%s'Invalid character '%s' in expression.fatal flex scanner internal error--end of buffer missedfatal error - scanner input buffer overflowout of dynamic memory in yy_get_next_buffer()fatal flex scanner internal error--no action foundType required for qualificationType required within braces in coercionRight operand of 'in' must be typeInvalid operator symbol `%s'bad buffer in yy_scan_bytes()Invalid base: %d.Integer literal out of range___system__addressCould not find renamed symbolCould not find %sada-exp.ystandard__No definition of "%s" found.Invalid use of type.16#unrecognized attribute: `%s'flex scanner jammedInvalid conversionCannot slice a typePrefix must be typeQU%02xNEW not implemented.unchecked_accessunrestricted_accessmodulusNULL_PTRCHARLITDOT_IDDOT_ALLSPECIAL_VARIABLEELSETHEN_AND_STARSTARTICK_LENGTHTICK_LASTTICK_FIRSTTICK_ADDRESSTICK_ACCESSTICK_MODULUSTICK_MINTICK_MAXTICK_VALTICK_TAGTICK_SIZETICK_RANGETICK_POS';''\''primarysave_qualifiersimple_exprelationand_expand_then_expor_else_expxor_exptick_arglistopt_type_prefixvar_or_typeaggregateaggregate_component_listpositional_listcomponent_groupsotherscomponent_groupcomponent_associations a5 aE aеa╗a▌a(a8ava% aЎa╝ь`l°`Щ°`╝ь`╝ь`┴a╨a▀aюa¤aaa0aEaZaЗaaЦaк°`╣°`╚°`┬ї`╤ї`рї`╝ь`яї`■ї` Ў`Ў`+Ў`MЎ`zЎ`УЎ`┐Ў`ЎЎ`ў`ў`╝ь`╝ь`╝ь`╝ь`╝ь`╝ь`%ў`5ў`Eў`Uў`eў`uў`Еў`Хў`еў`╡ў`┼ў`╒ў`°`1°`paЬaлa║a╔a╪aчaКaЩaкa╗a╝ь`шaЛaaUaЭa╜a╙a∙aa+aFacaЧa┐aГaЭa aaBaWa═aPa*a;a╫aцaaa)■`:■``■`q■`В■`Ч■`м■`╗■`╨■`aa]°`┤Ё`?ё`┤a╤a a0a|alaeї`eї`Аї`Аї`ч°`$∙`|∙`б·`└·`3ї`3ї`░·`∙√` №`№`)№`aaqaБaСaбa▒a┴a№·`√`√`,√`й√`╣√`╔√`┘√`щ√`8aaaSї`Ъa└a╫a■a9№`o№`▓¤`╫°`Sї`Ыї`╫·`Ha▀■`┤a┤aиШ Ш Ш Ш Ш Ш Ш Ш ииvvии∙ ц ївШ "*╘ ы T9Ш Ш Ш .??¤ ¤ ??▄ c Ш Ш Ш Ш Ш иШ Ш и###Ш Ш Ш Ш ииииииииииииииииGии^Ги[иUиШ 5:;<Ш Ш Ш иШ и═иШ Ш 2Ш vШ Ш |Ш Ш Ш z╠ Ш F╧╧╧ жн╧╧╧┌???ccccиcШ иШ иШ Ш иШ иШ ииииО╫ Ш Ш Ш ═иШ └▒Ш Ш Ш Ш ¤ DииШ ЄШ #и╫╨Ш Ш Ш Ш NOPSиШ ]Ш Ш Ш Ш Ш Ш SШ Ш ╧#иШ ииШ Mи═иШ иШ ╧Z\Ш bШ Ш Ш Ш Ш Ш @:?"A9#>;DB*C !$%&'()+,-./012345678<=?@1m24 ? A ? A >? 23 8>XYZ[+]_202:;+:J=0ж0*+0+F0sEAGHIJKLMNOPQRSTU?WC:AJ"#$%Ф(ЦejЩЫn:lm┘A:::s╢ С?1234tD(8?:AA?╤@С :"? ?eЭЮЯа? Сз ж :▒< ┤ ▓ B ╖ ├"#$% ( ╘╒╥ ╪ ┌ ▄┘12348 : >?@A D "#$% ( 1234 8 : >?@A D " &' " &' : < ? AB : <= B "#$% ( " &' ? : < B " &' : < B " &' : < B " &' : < B " &' ,-./0 56: <:; B,-./0 567 :; ,-./0 567 :; ,-./0 56 :; "#$% ( "#$%& (?*+ "#$%& ( "#$%& ( "#$%&( "#$% ( *+ "#$% ( *+ "#$% ( "#$% (yz87`лra;<│#┤&'0*+/─#┤#:kдbc9#()d:XYZ]УХЧШ▒Ъ[Ьq$\^/EF▄uЕ_v$╞$hiеgj$о|oАБВДЖЗИЙКЛМНОПРpТtwsГСRSTUЫ╗W╝би╜Щ╛мЭйкунЮЯак╧░║╩ о о о о п╡Wо ╙e.╘╒╓▌f╣╪ цчв┐└┴┬ш╕╟к╙ ╦╬╠╨╖╙ ╙ ╙ NOPQ╫RSTUW╨ ▀р▐тфхко о о о ╨ ╨ ╨ о e╙ ╙ f╙ ╥╙ NOPQRSTUWо о о о о e╨ ╨ f╨ ╨ { , ш ш - ФNOPQRSTUW █Ц , ═ ;<= ;<>?@AB;<CDEF>?@AB;<CD╢EF>?@ABCD╤EF>?@ABCDEFNOPQRSTUWGHIlJKLMNOPQRSTUVWсmnGHI▓JKLMNOPQRSTUVWGHI├JKLMNOPQRSTUVWGHIJKLMNOPQRSTUVlWNOPQRSTUWmnNOPQRSTUW╚╔NOPQRSTUWOPQRSTUWTUXVWZ[Y]TTTTTTT'456789Sa_yx]'Tdijm\TTPPPEDJITTTTTTTTTTTTTTTTTTTTTTTTOT^snTTTTgcefTTHGF]'(231*)#$&% !"TBT>T:;T?TCTTTT' b`TTluphkTTTzPT@<=AT tovqQ],+PTNTTMTTT T/.wrKLжeОEFGGGHHHHIHJHHHHHHKKKKKLLLLLHKKKKKKKKKMMMMMMMMMMMMMNNNNNNOOPPQQRRSSHHHHHHHHHHHHTTUVVHHHHHHHHWWWWXXYZZZ[[\\\]^`__a_b__c_HHHШШШШ7╥ШШШШШ┬ШШёШШШШ╒ШШЩШШШШ %┼г}~x !"123456з┌ж┘ "&': ,-./056:; "#$%&(14238:@*++?*+A?N\ACNN:TTTKLNNKKKHKWKKKKKKKKKKKKMMMMMM::::KLJ 0b`NKK_NA\H+?AD7HKWMMMMNNNN?I_N*+?NKNTK7?AA?K:ca?+TKNN?N_NN??? !"#!$%&'(!!)*+,!-.!!/0123456!78!9:;<=!!>?@A!BC!!865+6-.+,+++++++411111111111*5%$00'3&(#)1111111111111111"00 11111111110/ 1111 21!111 ╬╬╬╬╬╧╨╬╬╬╬╬╬╬╤╬╬╬╬╥╬╬╬╙╙╙╙╙╙╙╙!╙!╬╧╬╧╨╘&&╘╬╬╘╬╒╤╬╓╫╫╬╪╬╬╬┘╬╬╬┌╬╬╬╬╬█╙╙╙╙╙╙╙╙╙╙╙╙$╙╙$!$0▄╬╬╬0╘╒▌╫╫▐╬╬╬┘┌╬█╬▀р╙╙!╙╙╙╙╙!╙╙╙!!╙╬с╬╬a▌╬╫╬т▐╬╬╬╬╬╬╬╬╬╬╬╬╬╬ур╙!╙$╙╙$╙╬╬╘╬ф╬╬╬╬╬╬╬╬╬у╙╙╙╘╬╬╬ф╬╬╬╬╬╬╬╙╙╘╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬ Й~Жффф>фmффoфkп^о┤0\PNф╠G╓║ыЇ0'p(о│ф├ZSPI>ёHфф'фBKффф-фф,фBI]fySМЬ36?HK9Toh@i;8N|ф2еУ(YВGгСаС╙─хю}&;?K23sЯ╚Пu`ф┐╩кєN▐Їў■/╤╪╦√.|Фzо╦▓╛в╬ф]X6╙Q`c╫╪уш+bMc▀[╤╠╞╜оeь°\zЫДh¤═uф@ф)9>N_pszS0БСЭвн░└zЕ╟╥ #%7e1#%1#%;;Ф=hh#%==f7eе#%├е#%f└Ф ┐iiМ'М╛)╜К╝i╗КИ'П╣ЧП▒)И ХРС ЧЦ""" ННТ"Р<ХС"444Ц<о<<Т зEEE4ШН<л4"к"4EFFF !!!╡F<Шн!<лF"к"!г4HHHЩHииIIIн!]]]IОMMM!HI╡!M╪JJJ╪]M!жJKKKжж!JмK!$$$╢╢KMЕ$LLL^^^$╕LKмпJ╩╩L$░MNNN^$mmmNm╕$KпJNOOO░$LГАO$m┼k┼cO$&&&&&&&&&L&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0000000000000000000000000000000000000000000000000000000000000000000PPPQQQ┘`P\┘QRRRP[BQ/RSSSTTTRPS.UTVVVS-UT,VY╖╖UQ+VPYRUYS║║UWWWYUQWVY╖RWYSXZсXсXZ║──VтXZтgg╞╞WXZsXXZglllsXZsl─Walsg╞gaassaaaaaapppВВВp╔╔╔paaaaanВnn╔nnЮqqqnnnЮnqrrrЮqrnnnnЮrnЮnЮtttnnnntuuunЛЛtУuvvvwwwuЛvУywxxxv╠╠wyxУtyЛxЛУyzzz{{{yzty{╠xz|||{}~══|}~|}~x{}~╟╟╟}~═|}~{╟╟╟ЪЪЪЪ|ДДЪДДДДДДЫЫЫЬЫЬЫЬДДДДДЬЭЭЭЯЯЯЬЭЬЯбЭаааЯбабавввбйййвб▓▓▓йвб▓й│││▓┤┤┤│┴┴┴┤│┴┤┬┬┬┴╚╚╚┬┤╚┬│╚╚╚┤│╧╧╧╧╧╧╧╧╧╧╧╧╧╧╨╨╨╨╨╤╤╤╤╤╤╤╤╥╥╥╥╙╙╙╙╙╙╙╙╙╘╘╘╘╘╘╘╘╘╘╘╘╘╘╘╘╘╒╒╒╒╒╒╒╒╒╒╒╒╒╒╒╒╓╓╓╫╫╫╫┌┌┌┌┌████████▄▄▄▌▌▌▌▌▐▐▐▐▐▀▀▀ррррррррруууууфффф╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬ !"#$% !"#$%(?VI@EEFeЗaIZG^IIggмHhiiVIiiИeЗ╡IZ╔]IIЙйм)+,,-...../................000000000000000000001..000000000000000000444й:ННи(и:EEF;5<<йG;6<<\7Hй=EEFИй=НMGйEEFЙ>Hж<G7)=й<╕HJ=пОMEEFй>)KжGEEFнйLHйGJпоEEFHННKйGNО:нОLHO444о;й<<ОP╕EEEN╬░Н=╝O6T╗U7HEEFPEEF]G<░╛G=╝HT╗UH'7mmmйn║║EEF╛QВВВGйEEFRoH├SGfEEFfГHQ╢GEEF╖╖RH╜GSEEF╖╖HtЖGEEFВВВH┼Gr╜┐q╠╠HW└tEEFГXmmmGn┼Yr┐qHEEF└WsдгGXo╩l╩ЖHY+,,,+++++s++++++++++++++++[[[[[[[[[[[[[[[[[[[[+++[[[[[[[[[[[[[[[[[[+++++++++^++++++++++++++++````````````````````+++``````````````````EEFEEFj]GАjGEEFH]lH_GEEFEEFHuG^IGEEFH^yH]GI──Iv]HDuICwI~x╞╞yEEFAI9IvGz32I─wH~xIIА╬|&АII╞──zз}&зЛЛ╞╞{IIЫ|╬IIМEEFI}╬IG─╬╬{]╬HЫЛ╬╞╬МДДI╬╬╬I╬ДДДДДДEEF╬ВВВ╬GВВВ╬╬╬H╬ДДДДДОГ╬╬ПОГО╬РIEEFСОТIУGEEF╬│╬H╬GФХЦЧI╬H╬ШI╬╬У╬╬╬│EEF╬ФХЦЧGEEFШЛЛHкGEEFEEFHМGлЮGEEFH══HIGкЬI╬Л╬H╬Мл╬ЮEEF╬EEFIG╬ЬIG═ЭHEEFHбв══G╬╬╬╬IIH╬IIЭ╬╬Я╬╬╬бв╬╟╟╟╬╬II═аIIEEFЯH╬╦╦GEEF╬╬╬H╬Gаее╬╬╬H╬╬ееееееEEF▓╬╬╬╬G╬╬╬I╬╬HIеееее╬╬╬▓EEF╬EEFIG╬╬IG┤╬HEEFHI╬╬╬G╬╬I╬╬╬HEEF╬┤EEFGIEEFG╬HI╬G╬HEEF╬HEEFGEEF╬G╬H╬G╬╬H╟╟╚H╬╟╟╚G╬╬╬┬G╬H╬╬╬┴H╬╦╦╬╬╬╬╬╬╬╬╬╬┬╬╬╬╬╬┴''''''''''''''*╬╬*╬╬╬***888╬╬╬╬╬8╬8╬╬888B╬BBBIII╬╬╬╬III╬╬╬III+++++++++++++++++bb╬bbbbbbbbbbbbbbcccd╬╬╬dddk╬╬kkkkppp╬p╬╬╬╬╬p╬╬pppБ╬╬╬╬Б╬╬╬БЕ╬╬ЕЕЕЕК╬╬КК╬╬╬К╬КЩЩЩЪЪЪ╬╬╬╬ЪЪЪ╬╬╬ЪЪЪ▒╬╬▒▒▒▒╣╬╬╬╣╬╬╬╣╬╣╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬bxЛ$6Р%6Р%║Ц%*╒К#MЕ"k;Т!╘tЧ(█gЕ')6Р&▐@П-(NП,,зЧ+ч$Ф*"°О) щщэюЁї∙¤"&(0;EILOSW[_bdfhly}БЕЙНСХЩЭадимо│╗┐┼╨╘╪▄▌▐▀рсхчьюєї·№!#%')+/16@BHLS[_egkoqs{ЖИНЦЧЭви▒▓│╖╝╦╩═╨╧╒╘╫┌┘сух ()07;=?ACFILOPRVZ`eimquy}БЕЙЛПУЧЭгзо╡║╛┬╞╚╩╠╬╨╥╓┌▀фшьёЎ·■&,256:<>?ACEGIKMPRUX\_cgilorvxz~ВДЕКОПЦЧЬабилоF G N G>N HN H H H:L? W:L? W@JI:N? H:KK? W:KK? :G? W Y H K K &K 'K N +N LAN LA+N BWCH K(K K"K K#K K$K K%K KK KK K K KK K KK KK KK KKK KH7T KW K&KK K&H7T K&W KK KK KK M O P Q R S MM OM MM PM MM QM MM RM MM SM H0 H/ H.T H-T H,T H6 H5 V2:NAN? V3:NAN? V8:N? U4:N? U1 :? W U < X 0 X0 X :Z? \ [N [\ NA [NA ] ^ ^A\ =+N _ +`N K+N KK+aN *b_ K*_ KK*c_ "H H H;ND ┘╕ПпEО▐╕ПO▐С16Р:6Р@У╢╣П┬╣П8╣П°?УЦуЕB6РI6РQ6РЙ<Уb6Рg6Р.<УЖйТl6РяаП√╣П ╣ПS║ПЗБТr<Уh<УD<У║П║П║Пў╣П║П║П║П╖;УшД╬┤Р°┌бr6Р╟=Уя╣П╫┤Р{6РЗ6РС6РЬ6Рй6Р╡6Р┬6Р╦6Р╘6Р▌6Рц6РЁ6Р√6Р║П%║П!║ПL╣ПFЦ7Р╗kд7Р╧╣Пf║Пj║Пb║Пn║П5aО║П 7РД║П7Р$7Рf7Р/7РXьР87Р@7РZ7РM7РY7Рa7Рr7Рn7Р~7Р╚ЄХК7РФ7Рн7Р╜7Р╬7Р╒7Рх7РИ║ПМ║Пк║По║П%s: near `%s'Numeric constant too largeEmpty character constantUnmatched single quoteInvalid character constantInvalid number "%s"superNo class named `%s'unknown type `%.*s'%.*s.%.*sjv-exp.yInvalid cast expressionINTEGER_LITERALFLOATING_POINT_LITERALIDENTIFIERSTRING_LITERALBOOLEAN_LITERALBOOLEANSUPERPrimitiveOrArrayTypeStringLiteralPrimitiveTypeNumericTypeIntegralTypeFloatingPointTypeClassOrInterfaceTypeClassTypeForcedNameSimpleNameQualifiedNamePrimaryPrimaryNoNewArrayArgumentListArgumentList_optArrayCreationExpressionDimExprsDimExprDimsDims_optFieldAccessFuncStartMethodInvocationArrayAccessPostfixExpressionPostIncrementExpressionPostDecrementExpressionUnaryExpressionPreIncrementExpressionPreDecrementExpressionUnaryExpressionNotPlusMinusCastExpressionMultiplicativeExpressionAdditiveExpressionShiftExpressionRelationalExpressionEqualityExpressionExclusiveOrExpressionInclusiveOrExpressionConditionalAndExpressionConditionalOrExpressionConditionalExpressionAssignmentExpressionAssignmentLeftHandSideerror in expression, near `%s'Unterminated string in expressionInvalid character '%c' in expressionNo symbol table is loaded. Use the "file" commandFIXME - ClassInstanceCreationExpressionFIXME - ArrayCreationExpressionForm of method invocation not implemented aЁaЁaЁaЁaЁaЁaЁaЁa"a"aЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁa"a2aBaЁaЁa2a2a▌aЫa▓a2a2a┘a2aa2aaaaaaaaaaa2aЁa2a2a2a2aЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁa2aЁa2a2aЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁaЁa2a2a2a2aКa╪aИaabaE6aL(aL(ag6aМ6a╖6a7a67aL(aL(aY7aL(aL(a╫0a°0a1a91aZ1a{1a]2a~2aL(aи/a┬/aL(aL(aL(aL(aL(aL(aъ/aL(am0aL(aL(aL(aL(aL(aL(aL(aL(a╘.aа.aЬ1a│1a╪1aч1aє1aL(a2a'2aL(aL(aL(aL2a▒0aL(a╞0aП.aП.a/aа.a|0aк.aк.aV4a┼.a┼.aL(a~.aL(aL(aL(a4a)4aL(aL(aL(a84a//aL(a>/aM/aL(a\/ak/aL(az/aЧ2an3aL(aУ3aв3a▒3aL(a└3a╧3aL(a▐3aэ3aL(a№3a╞5a╒5aх5aL(aї5a6aL(a6aL(a%6aL(a56aL(aG4aL(a4aL(a╖5aL(aL(aв0a¤.a~.a╫o o √ o o o o o o o o o o ∙ э 22222╫o 22.o o o o ў o o o o Wo o ,?o o o o &o o o o o o o c5U4^B)GJzo o o (o ?o ;;CRo o oko o o o o o o ў WDo o o O[o [??ю o ?o o 22222222222222222?222o o o p~?Аo А??[с ┴o }o Бo ГВ?o o ЭЗo o o cc55UUUU44^B)GДJo o o ?Жo o o Л2┴o o o ?o o o 2Нo o o o Рo o o 6+01)'(.*7!"/4235 #$%&,-ДЕ Ф%ПJL/1МО.3 e/./МjО,┐╖,. ├/^,╟,-KKK!"#$'()'(,-K02f56i/kffniikk0n1xyz{%&f i.kВ4n./0ВВ/Л)*+ПРЛЛПРРВ./0Ь./tuЛЬЬ4ПРvw|}qrs0/14Ь044╖1╣471╖1╣╣1,├├ O~╖Б╣ А ├Г 0 2 56╛ '() ,- 0 2 56 '() ,- 0 2 456 '() ,- 0 2 56(┤╡d└Ь/Ih╜И%К Nр Ц ┐р ]▀ 2(║▀ ║LQ/_Жс Э^Зс ЧcJK╗Ъ╝(2b╠~ ╚/j~ M} SД═} kЕУ2i╬Top(XYZ[\/Й`axyz{tu~2АБ((Л(/Ш(/Щ/ЫП/Фийклvw2|}2e2(Х2efg/▓Ц(qrs((/╕ВГ//Ш2eРg(JKде2/┼╢22жзмнбвг╖╣╛┴2├Ь┬─(╞(╔╟╩/╧/╕╨l(M/SОо2▒2п░T2│ ╦M Х J.' IАH%)&*A+,WKL^OPTZbehmprtvxz|Д}# JI*,QRSVU=IXY@13NM !?=7=3<(:"$>/-4_`acdgfijlkonqsuwy~F3856\;E3G2B90[]{DC899:;;<=====>>??@@@@@AABCDDEEFFGGHIIJJKKKKKKKLMNOOPPQQRRSTTUUVVWYXXXZZZ[[[[[\]^^^^^^_`aaaabbbccccdddeeefffffggghhiijjkkllmmnnooppppqo o o o o o ¤ o o o o o o o └ o o o o o o Цz o |М у Э o o o o o o :o o p o +1■ -NQSM\o } o o o !"#OP$U&'R)*+,Ю-Яа.МНСТV01nW3456789:;<=>?@ABCDEFGHm '(),-02569:;<=>?@ADEFGHIJKLNQVWXZ[\]^_`abcdefghijklmnopq./.>BCEH EVZ^^^^^>Eq^^/T./0T./OqY,-)*+'(%&!"#$ GqG/RSR0/TUT14/GqqGq3MOP^^^ccddeeeeffghijqkmm40q/SUUP11a4404q17P41^aPm11h╕Пl╕Пp╕Пs╕Пv╕Пy╕П|╕П╕ПВ╕ПЕ╕П ЗБЦ$eKЕ$ш╖П$ы╖П$dлМ$СРЧ$т╖П$х╖П$m╕П$i╕П$╙╙╘╫рсхює√!#(*6;?AFGKLPQUlmrswxyz{|}ЕКПХЧЭЮвелм░┤╢╗╜┴├╔╧╬╘╓█ьюєЇЎ°∙¤ !%)=EFHJOPRWXZ`acegmnpuv{|АБЖЗМНТУШЩЭЯжикл░ !#%')+-/1369;=?ACEIKOQSUY[]_aegioquvx}ВДЗЛОТФХЩЭабжн┤╣╛├┼╟╔╦═╨╙╒╫┌▌ртхшъэЁЄ°¤ !%'+/379=ACGIMOSUY[_agikosuwy{9 I : ; > D < ? @ A E B >T ET H G H E.G q Iq K Q = 0q1 N V X Z LOM 2 3 C0P1 q Oq O >RU BRU S RS /q4 /4 T/4 T J.G .G E0 WYP1 J.G0P1 .G0P1 E/q4 /q4 K/q4 J E \ ] [- [, _ ` '^ (^ )^ a -^ ,^ [ 5^ 6^ b 0>U1^ 0q1a 0ET1a ^ c)^ c*^ c+^ c d'c d(c d e&d e%d e f!e f"e f$e f#e f g f gf g hg h ih i ji j kj k lk l lq7m m o pm pm F V Z n ┘╕ПпEО▐╕ПЙxРЩxР░xР╗xР╩xР ╕П╣ПtНy=Уv╣ПhвO▐Сщ╕П┌xРБ=У@УY6Р =УтxРL╣П╧╣ПяаП▀╣Пу╣Пш╣Пя╣Пє╣Пў╣ПD<УG<У√╣П ╣Пr<Уh<У╒;У╦;У║П║П║П║П▀dО°>У╙>У║П!║П%║П╗kдf║Пj║Пb║П^║ПZ║П'&Чn║П5aОv║ПшxР¤xРyРyРyР%yР2yРDyРYyРєxРiyРcyРnyРyyР║ПЗyРПyР▓║П╣║ПИ|РбyРоyР┐yР╫yРрyРшyРэyРЎyРzРzРД║ПzР)zР;zРSzРkzР{zРТzРйzР┼zР╘zРэzР{Р{Р%{Рo{Р8{РN{Рd{Р}{РХ{Рл{Р└{Р╦{Рr{РOverflow on numeric constant..true..TRUE..false..FALSE..and..AND..or..OR..not..NOT..eq..EQ..eqv..NEQV..neqv..EQV..ne..NE..le..LE..ge..GE..gt..GT..lt..LT.complex_16complex_32integer_2logical_1logical_2logical_8complex_8logicalreal_16real_8INT_S2_KEYWORDLOGICAL_S1_KEYWORDLOGICAL_S2_KEYWORDLOGICAL_S8_KEYWORDLOGICAL_KEYWORDREAL_KEYWORDREAL_S8_KEYWORDREAL_S16_KEYWORDCOMPLEX_S8_KEYWORDCOMPLEX_S16_KEYWORDCOMPLEX_S32_KEYWORDBOOL_ANDBOOL_ORBOOL_NOTCHARACTERGREATERTHANLESSTHANsubrangecomplexnumп@a#?a#?a#?a#?a#?a#?a#?a#?a╛Ca╛Ca#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a╛Ca╬Ca#?a#?a#?a╬Ca╬Ca╘Ca6CaMCa╬Ca╬CatCa╬CaЮCa╬Ca╖@a╖@a╖@a╖@a╖@a╖@a╖@a╖@a╖@a╖@a╬Ca#?a╬Ca╬Ca╬Ca╬Ca╬Ca#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a╬Ca#?a╬Ca╬Ca#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a#?a╬Ca╬Ca╬Ca╬CaSa Ia╓Ra╟Ra╕Ra?OaRa№QaЄQa╠Qa IaOaOaЫQaХRa@PaPa¤Oa IaХOasOaNOaQa Qa·PaыPa▄Pa═PaЕRauRaeRaVRaGRa8Ra)RaRa╡UaеUaЦUaЗUaxUaiUaHUaUa╘TaОTa Ia IaGTa%TaTa▓Ha Ia IakSaTSa>Sa$Sa┤Pa IaеPaOaOa/Oa&OaHQa'QaYQaмVaЛVajVaIVa(VaVaцUa┼UaДPacPazQaзQa╟OaхRaУSaЖSaЁSaнSaаSaЖ╟ ╟ ╟ ╟ ╟ ╟ ╟ в╟ ╟ ╟ ╟ ╟ ╟ ╟ ╟ ╟ ╟ ╟ ╟ ╛╟ ╟ ╛╛╛Ж╛╟ g╟ ╟ ╟ ▌ ╟ Ж▀ ▀ ▀ ▀ ▀ Hр с ▀ ╟ ╛╛╛╛╛╛╛╛╛╛╛╛╛╛╛╛╛╛╛╛╛╟ ▌ ▌ ъ╟ Ї ╟ ї ╛╟ ╟ ╛ЧГggк╝═▄▄ффффє є 1┘ ┘ ╥ ╥ ╥ ╟ ╟ P╟ ╟ ╟ ╟ Ў х ╟ Bg▀ ╛*ш ╟ ╟ %╟ g╛╛╟ ╟ gg3$560./18 !-#"7 %&'()*+,24$235012305GHI556666-./0123%55 66K 0123456789:;<=>?@ABCD N Q ./0123 5 i r $u 5 7 z}~/0 5 78 $ /0 57 $ /0 57 $ /0 5 7 $+,-./0123 50 56 6"#$%&'()*+,-./0123 58 "#$%&'()*+,-./0123 56 "#$%&'()*+,-./01235 "#$%&'()*+,-./0123 5"#$%&'()*+,-./0123 5#$%&'()*+,-./0123 5$%&'()*+,-./0123 5%&'()*+,-./0123 5'()*+,-./0123 5G!zDE~F&BCDEHFjknI/F'PQ()*{.-g?@ABCDEMFpryqRSTUVWXYZ[\]^_`abcdefst@ABCDEFvt|АБВu % G=>?@ABCDEFHIl 0123l456789:;<=>?@ABCDEF01}2N3456789:;<=>?@ABCDEFO0123456789:;<=>?@ABCDE0F456789:;<=>?@ABCDEF456789:;<=>?@ABCDEF56789:;<=>?@ABCDEF6789:;<=>?@ABCDEF789:;<=>?@ABCDEF9:;<=>?@ABCDEF/165VE0FGLKIJMNOPQRH32897 =;:?B+,.-*)(#"%$'&! U>>>>????@<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<?66<86B<<╢ЪР╜ЪР─ЪР╠ЪР╘ЪР$┌ЪР$рЪР$хЪР$ъЪР$ЁЪР$ЎЪР$√ЪР$ЫР$ЫР$ ЫР$ЫР$ЫР$ЫР$$ЫР!$)ЫР!$.ЫР $3ЫР $8ЫР"$=ЫР"$BЫР#$GЫР#$LЫР$WЫР$f Р$bЫР$lЫР $vЫР$АЫР$КЫР$╟Ц$ФЫР$ЬЫР$╞Ф$Л╕П $дЫР$С┬Х$ээюёў№!$(,28>DJNTZbfjnrvz~ВЖКОТЦЪЮвжлп│╣└╔╨╙╓▐хэDFHJLOQSWY^`bdfhjlnprtvx}ВЙН &')+/369;?CHLPTX\`dhlptx|АДИМРФШЬавджикп▒│╡╖╣╝╛┴├╞╚╠╧╤╘╪┌▄▐ртфцшъьюЁЄЇЎ·№: < ; B 5<6 0< $< /< < 7< < <5=>6 < ? >< <8< <8 8< 8 << 5@6 5B6< <3I <-< <2< <0< <1< <.< taEza1╚ ╚ ╚ ╚ ╚ ╚ ╚ ╚ ╚ ╘ ╚ ╚ 1111111╚ ╚ "╗-щ ╚ .1╨ ╨ ╨ ╨ ╨ &╨ ╚ 11111111111111111111111╚ ╚ 1╚ -A1╚ {╔ ╚ ╗╗╗Xя4HZZhhhhtt▐ ▐ ╨ ╨ ╨ ╚ E!1╚ ╚ 1╚ Ы╚ ╚ 1╚ ╚ ╗'╨ ╚ ╓1╚ ╗>6'<@423:5C+!,"1;?&A%B #$()*-./0789= <78@:;< <45678:;<2)*+,-./0123456789:;<=>? H C<BB &' g j ?4o234@@ w < > A E!"#$%&' )*+,-./012345678 :;< C!"#$%&' )*+,-./012345678 :;< @!"#$%&' )*+,-./012345678 :;< @!"#$%&' )*+,-./012345678 :;<"#$%&' )*+,-./012345678 :;<$%&' )*+,-./012345678 :;<%&' )*+,-./012345678 :;<&' )*+,-./012345678 :;<' )*+,-./012345678 :;<)*+,-./012345678 :;<+,-./012345678 :;?@A(BCDGMNOPQRSTUVWXYZ[\]^_`abcl f))H %)wkIieFpK rtqEvLxy*h+,-./0123456789:;<=>?@ABCD*o+,-./0123456789:;<=>?@ABCD*m+,-./0123456789:;<=>?@ABCD*u+,-./0123456789:;<=>?@ABCD,-./0123456789:;<=>?@ABCD./0123456789:;<=>?@ABCD/0123456789:;<=>?@ABCD0123456789:;<=>?@ABCD123456789:;<=>?@ABCD23456789:;<=>?@ABCD456789:;<=>?@ABCD89:;<=>?@ABCD:;<=>?@ABCD;<=>?@ABCD36;4EC5>?D8=7A B @21/.-,+&%)*('$#!" B<:90DEEFGGHHHHHHHHHHHHIHJKKKLHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHMMHHHNNOOOP╚╚╚№є╚╚╚╚╚╚3 gsj &'234<>AEFGHJMNOP;EILPTX^djnrvz~ВЖКОТЦЪЮвжко▓╢║╛─╦╘сшыё¤'28>NЕЗОЫ !$'+049:@BCEIKPUY]aeimquy}БЕЙНСХЩЭбелп│╡╖╣╗╜┐─╔╦╧╤╙╒╪┌▌▀сE G F O H GH 4H 'H 3H 2H >H &H H8 H7 H:P H:P H: H;G? HУ╙>У║П║П!║П%║П╥┤РZ║Пb║П╗kдf║Пj║П'&Чn║П5aОv║П║ПXьРД║П▓║Пf7Р╣║П└║ПFЖ-{Т▐╗ПInvalid digit '%c' in number.unhandled token in m2lex()Sets are not implemented.HEXUINTM2_TRUEM2_FALSEIDENTVARNAMEMIN_FUNCMAX_FUNCFLOAT_FUNCINCEXCLINTERNAL_VAR'#'not_expnon_empty_arglistfblockUnterminated string or character constant.Floating point numbers must be base 10.Invalid digit '%c' in octal number.Overflow on numeric constant -- number too large.internal: Undefined class in m2lex()internal: Unforseen case in m2lex()No symbol table is loaded. Use the "symbol-file" command.yВa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa?Гa?Гa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa?Гa╠Бa═Вa└Вa╠Бa╠Бa└Вa═ВaЫГatГa└Вa└ВacВa└ВaOГa└Вa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa└Вa└Вa└Вa╠Бa└Вa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa└Вa╠Бa└Вa└Вa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa╠Бa└Вa╠Бa└Вa└ВavКakКakКakКakКakКakКakКa╜ЙaЕКaЁЕakКaЕКakКakКa<Цa^ЦamЦa|ЦaХЦaеЦaНaНa╡Цa┼Цa╒ЦaхЦaїЦaЧa9Чa┬ШaфШaїШaЩaOУaOУaЩa%ЩaHЧaWЧazЧaНa░Тa░Тa░Тa░Тa░Тa∙Тa^УaДУa∙Тa╓ХaНaУaУaУaУaчФaЦaНaшЩaСФa-Цa№ХaEХaХУaеУa╡УaУaУa┼Уa╒Уa ХaХa'Хa6ХaЙХa-Уa-Уa ФaЯШa╞ЩaYШaНaШХaхУa╥ФaаФaEФa0ШaНaЯЧaHЩaUХaгз з з з з з з з з з р╩ ▌ т ь э Є !#$%з гз гз з гз Fгз Aз х гх ггггTTгTгггггггггTFр ╪ з гггггё ггггггггггггз гз Y№ ггщ pМи─&'рB№4P8.з гз г^█ █ █ █ гз )█ █ █ HZФ╧╧¤ггз з з lс з з з з з з з з гз з з з гз гз ггFз F▐ ▀ з з Ид└▄°гз з з з з з з F*0 !"#%&+,-./1789=?@$$$$<_ /12345678<:;<=<BC<A<DCC<&B<<AB,"</012BМ5789:;<=><@:;<=<FGHIJ<LMNOPQRSTUVW"Y<<<<^<<<,"$AA34B6K s u 12345678K:;<= Л2345678 :;<= Ъ Я б гд ▓ ! #345678 :;<= 34 < >? B ! #5678 :;<= 34 < >? B&'()*+,-./ 12345678 :;<= $D&'()*+,-./ 12345678 :;<= $A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= A&'()*+,-./ 12345678 :;<= $A&'()*+,-./ 12345678 :;<=$ &'()*+,-./ 12345678 :;<=&'()*+,-./ 12345678 :;<=&'()*+,-./ 12345678 :;<=% ▓sss/СОПO-PQRSTUVW^XYZ[0_uE?1A┤^│tм^\_23Т_A]4abcd{кg+ijklmnop5qXYZ[6vwxyz7~АБВГДЕЖЗИЙDК89:;Р<=>`╡ НЪЧШef_h|ежPQRSTUVW}XYZ[иQRSTUVWXYZ[ноп░▒ ║ RSTUVWXYZ[ !" TUVWXYZ[, !"FGHIJKLMNOPQRSTUVWXYZ[ЯзFGHIJKLMNOPQRSTUVWXYZ[баFGHIJKLMNOPQRSTUVWXYZ[вFGHIJKLMNOPQRSTUVWXYZ[rFGHIJKLMNOPQRSTUVWXYZ[УFGHIJKLMNOPQRSTUVWXYZ[ФFGHIJKLMNOPQRSTUVWXYZ[ХFGHIJKLMNOPQRSTUVWXYZ[ЦFGHIJKLMNOPQRSTUVWXYZ[ЩFGHIJKLMNOPQRSTUVWXYZ[ЫFGHIJKLMNOPQRSTUVWXYZ[ЬFGHIJKLMNOPQRSTUVWXYZ[ЭFGHIJKLMNOPQRSTUVWXYZ[ЮFGHIJKLMNOPQRSTUVWXYZ[лFGHIJKLMNOPQRSTUVWXYZ[╡FGHIJKLMNOPQRSTUVWXYZ[╢FGHIJKLMNOPQRSTUVWXYZ[╖FGHIJKLMNOPQRSTUVWXYZ[╕FGHIJKLMNOPQRSTUVWXYZ[г╣FGHIJKLMNOPQRSTUVWXYZ[дFGHIJKLMNOPQRSTUVWXYZ[FGHIJKLMNOPQRSTUVWXYZ[┤ GHIJKLMNOPQRSTUVWXYZ[DEBCFGJQLRO )NH*' )0"A=>8:)9<;@?1672354)PMI +.&,/#%( !-EFFGHIHHHJJHHHHHHHHHHHHHHHHHHHHHHKKLHHMHNNNOOHHHHHHHHHHHHHHHHHHHHHHHHHHHHHPQQRRRRSззззз"ззизззз6 #$B@&'ЛМCй()*. !#34<>?BFGHJKPQRSEJOTY\ahmtxz~ЕМРХЦЬбвийлп▒╡║┐├╟╦╧╙╫█▀учыяєў√ $&(,.F H G S H: 4IH 3H JH ? > У9?У{?УД?УньЦh╩Р1LЛ|йвl╩Р8╣Пq╩Р╧╣П╙╣ПЙ<У√╣П ╣ПяаП~╩РЗБТD<Уr<Уh<Уу╣Пў╣П▀;У║П║П║П║П║ПшД <У║Пє╣П!║П%║ПV║П^║П╬┤РРйН╗kдf║Пj║Пb║Пn║П5aОv║ПXьРД║ПВ╩РB╓ЕИ║ПМ║Пf7РК╩Р╚ЄХЬ╩РFЖ-{ТRECORDSELFinc:=FIELDNAMEnormal_startfield_expижaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaХжaХжaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaХжaЕжaыеaЖвaЖвaЖвaЕжaKдa:дaдaЕжaЕжa╥гaЕжa7гaЕжaKгaKгaKгaKгaKгaKгaKгaKгaKгaKгaЕжaЖвaЕжaЕжaЕжaЕжaЕжaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЕжaЖвaЕжaЕжaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЖвaЕжaЕжaЕжaЕжaл│aл│a╝aл│aл│aл│a─╗aл│aё╗aп║a▌║a╗a╗a%╗a5╗aE╗aT╗a/╝aП╝a╚╝a"╜ag╜aв╜aл│a■╜a ╛aа┐aл│a┼╛a╒╛a╛aШ╛aз╛a╢╛aф├aє├a└├a╧├a╓├a▌├aУ├aС─ax─aВ─a=─aL─a[─ao║ao║a─ar└a╚└aл│a ┴aV┴aЯ┴aо┴a]┬a▒┬a╠┬a5├a┐aл│aJ┐aщ┐aл│aл│a`└aj─aF║aF║a║a║a║a║a╒ Y╒ ╒ ╒ ╒ ╒ ╒ ╒ ╪ ╒ ╒ ╒ ╒ YYYх щ Y ╒ ╒ ц╒ ╒ ╒ э )╒ ╒ ╒ ╒ ╒ ╒ ╒ Y╒ $э $$YY╒ YYYYYYYYYYYYYYYYYY╒ ╒ ╒ ╒ ╒ ╒ ╒ ╒ Yv╓ То╒ цц .CCKKKKMM$YYY,╩╒ ╒ ╒ ╒ ╒ $ ц╒ ╒ Y╒ ц/3(&'-)%.41 !"#$*+,02/ /3 //,/236789:;<=>?@ABCDEFG2321,43Q!"#$ &'()P R-./ 1-./ 1 kj l z &'() -./ 1 % ' *+ / 12 !"#$ &'() -./ 13 !"#$ &'() -./ 13 !"#$ &'() -./ 13 !"#$ &'() -./ 13 !"#$ &'() -./ 1 !"#$ &'() -./ 1 !"#$ &'() -./ 1 !"#$ &'() -./ 1 !"#$ &'() -./ 1() -./ 1.014+Q-,qMN&'(&'(#2 O36S╞Q65zUV6PXYZ[\]^_`abcdefghi)RW)┼Ty{nABCDEFGHmoIJKLIJKLutv |EFGHIJKL789:;<=>?@ABCDEFGHIJKL7p89:;<=>?@ABCDEFGHIJKL7r89:;<=>?@ABCDEFGHIJKL7s89:;<=>?@ABCDEFGHIJKL7x89:;<=>?@ABCDEFGHIJKL9:;<=>?@ABCDEFGHIJKL:;<=>?@ABCDEFGHIJKL;<=>?@ABCDEFGHIJKL=>?@ABCDEFGHIJKLGHIJKL138KD259/0L4>BA@GIJHEF? C .-,+%&)*(' $#!"<=76 576889::;;;;;;<;;;=;>;???;;;@;;;;;;;;;;;;;;;;;;;;;;;;;;;;AABCBBBDEFFFFGGGGHH╒╒╒╒╒ью╒╒╒╒╒╒╒╒╒∙╒ klwj !"/$*%67 %'*+/1289:;G;G3333;:;?343;е╕в$Ы╕в$а∙О$7╕в$1Ц$Е¤Е$4ьР!$OШ $Ц$м∙О$▒╢Ц$m╕П$i╕П$8ьР$йqО $thisЁЁЁ∙·¤ "'+=O[YwtГДЖКЩЯгг╖╗┐├╟╦╧╒█счэєў√ '/2AILeАТЬл║╗┌!,0247?@ABEF $),/256<=CDFJOSWX]aeimquy}БЕЙНСХЩЭЯбгезйл░╡╖╣╗┐├╟╔╠╬╨╥╒╫┌▌▀сухч6 78 : 9 E ; :; ;1 %; '; ; +/;3 */;3 ;- < ?3 ; ?; E/;3 /:3 ;(; ;)@; ;"; ;!; ;&; ;'; ;$; ;#; ;; ;; ; ; ;; ;; ;; ;; ;; ;; ;; B /E3 /;3 2 AG AG FG C G H F D 1F G G 2 2 ┘╕ПпEО▐╕ПO▐С@У°?У;ьРUНЦуЕ ╕П╣П∙^Е2╣П?У8╣ПtНY6Р┐?У╢╣П┬╣П╧╣П╙╣ПЙ<У╬┤РЖйТ.<Уш╣ПяаПD<У√╣П ╣Пr<Уh<УшД <У╒;У╦;У║П║П║П║П║П°>У╙>У║П║П!║П%║П╫┤Рє╣П=║П╗kдb║Пn║П5aОД║ПEьРv║П║ПXьРRьРИ║ПМ║Пf7Рк║П╚ЄХFЖ╦║ПД╗П-{ТV╗ПmФ▐╗П7.6x86_64-unknown-linux-gnux86_64-unknown-linux-gnu breakpoints-invalid thread-changed new-thread frames-invalid array-section-end elt elt-rep-end elt-rep %u frame-end frame-where frame-source-end frame-source-line frame-source-file-end frame-source-file frame-source-begin frame-args frame-function-name frame-address-end frame-address signal-handler-caller function-call arg-end arg-name-end arg-begin display-end display-value display-expression-end display-expression display-format display-number-end display-begin value-end value-history-end value-history-value error quit field-end field-value field-name-end breakpoints-table-end record breakpoints-table field %d breakpoints-headers signal signal-string-end signal-string signal-name-end signal-name signalled exited %d stopped starting watchpoint %d catchpoint %d breakpoint %d array-section-begin %d arg-value value-begin value-history-begin %d field-begin frame-begin %d %s source middle%s:%d:%d:%s:%s error-begin addrmap_relocate is not implemented yet for mutable addrmapsfixed->num_transitions == num_transitionsaddrmap_create_fixed is not implemented yet for fixed addrmapsaddrmap_fixed_set_empty: fixed addrmaps can't be changed addrmap_find is not implemented yet for mutable addrmapsaddrmap.csize >= sizeof (*n)А┌a╪a`╓a0╓a╓aЁ╫aP╙a└╫aЁ╙a ╘aaddrmap_mutable_create_fixedaddrmap_mutable_set_emptysplay_obstack_alloc$debugdir:$datadir/auto-load$datadir$debugdirauto-load.c%s%c%sinfo auto-load show auto-load set auto-load gdb-scriptslocal-gdbinit-gdb.gdbscripts-directoryadd-auto-load-safe-pathinfolist!list->prefixlistlist->type == not_set_cmdlist->type == set_cmdInvalid regexp: %sAutoLoadedScriptsTableLoadedScriptscriptNo full name: full_pathYesNo auto-load scripts. exists.exe$HOMEauto-load: Expanded $-variables to "%s". auto-load: Updating directories of "%s". auto-load: Using directory "%s". auto-load: Resolved directory "%s" as "%s". auto-load: And canonicalized as "%s". Debugging output for files of 'set auto-load ...' is %s. Auto-load files are safe to load from any directory. List of directories from which it is safe to auto-load files is %s. List of directories from which to load auto-loaded scripts is %s. Auto-loading of .gdbinit script from current directory is %s. Auto-loading of canned sequences of commands scripts is %s. Directory argument required. Use 'set auto-load safe-path /' for disabling the auto-load safe-path security.Local .gdbinit file was not found. Local .gdbinit file "%s" has been loaded. Local .gdbinit file "%s" has not been loaded. Print current status of auto-loaded files. Print whether various files like Python scripts or .gdbinit files have been found and/or loaded.Show auto-loading specific settings. Show configuration of various auto-load-specific variables such as automatic loading of Python scripts.Auto-loading specific settings. Configure various auto-load-specific variables such as automatic loading of Python scripts.If enabled, canned sequences of commands are loaded when the debugger reads an executable or shared library. This options has security implications for untrusted inferiors.Show whether auto-loading of canned sequences of commands scripts is enabled.Enable or disable auto-loading of canned sequences of commands scripts.Print the list of automatically loaded sequences of commands. Usage: info auto-load gdb-scripts [REGEXP]If enabled, canned sequences of commands are loaded when debugger starts from .gdbinit file in current directory. Such files are deprecated, use a script associated with inferior executable file instead. This options has security implications for untrusted inferiors.Show whether auto-loading .gdbinit script in current directory is enabled.Enable or disable auto-loading of .gdbinit script in current directory.Print whether current directory .gdbinit file has been loaded. Usage: info auto-load local-gdbinitThis option is ignored for the kinds of scripts having 'set auto-load ... off'. Directories listed here need to be present also in the 'set auto-load safe-path' option.Automatically loaded GDB scripts (named OBJFILE%s) are located in one of the directories listed by this option. %sShow the list of directories from which to load auto-loaded scripts.Set the list of directories from which to load auto-loaded scripts.Various files loaded automatically for the 'set auto-load ...' options must be located in one of the directories listed by this option. Warning will be printed and file will not be used otherwise. You can mix both directory and filename entries. Setting this parameter to an empty list resets it to its default value. Setting this parameter to '/' (without the quotes) allows any file for the 'set auto-load ...' options. Each path entry can be also shell wildcard pattern; '*' does not match directory separator. This option is ignored for the kinds of files having 'set auto-load ... off'. This options has security implications for untrusted inferiors.Show the list of files and directories that are safe for auto-loading.Set the list of files and directories that are safe for auto-loading.Add entries to the list of directories from which it is safe to auto-load files. See the commands 'set auto-load safe-path' and 'show auto-load safe-path' to access the current full list setting.When non-zero, debugging output for files of 'set auto-load ...' is displayed.Show auto-load verifications debugging.Set auto-load verifications debugging.Valid is only global 'set auto-load no'; otherwise check the auto-load sub-commands.No auto-load scripts matching %s. auto-load: Attempted file "%s" %s. auto-load: Searching 'set auto-load scripts-directory' path "%s". auto-load: Stripped .exe suffix, retrying with "%s". auto-load: Matching file "%s" to pattern "%s" auto-load: Matched - empty pattern auto-load: Not matched - pattern "%s". auto-load: Matched - file "%s" to pattern "%s". auto-load: Resolved file "%s" as "%s". auto-load: File "%s" matches directory "%s". File "%s" auto-loading has been declined by your `auto-load safe-path' set to "%s".To enable execution of this file add add-auto-load-safe-path %s line to your configuration file "%s". To completely disable this security protection add set auto-load safe-path / line to your configuration file "%s". For more information about this security protection see the "Auto-loading safe path" section in the GDB manual. E.g., run from the shell: info "(gdb)Auto-loading safe path" auto-load: Loading canned sequences of commands script "%s" for objfile "%s". VEC_char_ptr_indexVEC_char_ptr_replaceVEC_char_ptr_quick_pushЁС@№ainfo_auto_load_cmdset_auto_load_cmdVEC_loaded_script_ptr_quick_pushDisplay the inferior's auxiliary vector. This is information provided by the operating system at program startup.Machine-dependent CPU capability hintsString identifying base platformBoolean, was exec setuid-like?Special system info/entry pointsSystem-supplied DSO's ELF headerL1 Instruction cache informationDynamic linker's section headersString giving name of dynamic linkerCOFF executable file descriptorCanonicalized file name given to execveDynamic linker's data segment addressAF_SUN_ flags passed from the kernelThe program has no auxiliary information now.No auxiliary vector found, or failed reading it.End of vectorAT_NULLEntry should be ignoredAT_IGNOREFile descriptor of programAT_EXECFDProgram headers for programAT_PHDRSize of program header entryAT_PHENTNumber of program headersAT_PHNUMSystem page sizeAT_PAGESZBase address of interpreterAT_BASEFlagsAT_FLAGSEntry point of programAT_ENTRYProgram is not ELFAT_NOTELFReal user IDAT_UIDEffective user IDAT_EUIDReal group IDAT_GIDEffective group IDAT_EGIDFrequency of times()AT_CLKTCKString identifying platformAT_PLATFORMAT_HWCAPUsed FPU control wordAT_FPUCWData cache block sizeAT_DCACHEBSIZEInstruction cache block sizeAT_ICACHEBSIZEUnified cache block sizeAT_UCACHEBSIZEAT_IGNOREPPCAT_BASE_PLATFORMAddress of 16 random bytesAT_RANDOMFile name of executableAT_EXECFNAT_SECUREAT_SYSINFOAT_SYSINFO_EHDRAT_L1I_CACHESHAPEL1 Data cache informationAT_L1D_CACHESHAPEL2 cache informationAT_L2_CACHESHAPEL3 cache informationAT_L3_CACHESHAPEAT_SUN_UIDAT_SUN_RUIDAT_SUN_GIDAT_SUN_RGIDDynamic linker's ELF headerAT_SUN_LDELFAT_SUN_LDSHDRAT_SUN_LDNAMELarge pagesizeAT_SUN_LPAGESZPlatform name stringAT_SUN_PLATFORMAT_SUN_HWCAPShould flush icache?AT_SUN_IFLUSHCPU name stringAT_SUN_CPUCOFF entry point addressAT_SUN_EMUL_ENTRYAT_SUN_EMUL_EXECFDAT_SUN_EXECNAMEString for name of MMU moduleAT_SUN_MMUAT_SUN_LDDATAAT_SUN_AUXFLAGS%-4s %-20s %-30s Auxiliary vector is empty._dl_auxvblock % auxv_pair_size == 0auxv.cobject == TARGET_OBJECT_AUXV/proc/%d/auxvmemory_xfer_auxvld_so_xfer_auxvIf on, GDB will delegate some of the debugging operations to the agent, if the target supports it. This will speed up those operations that are supported by the agent. If off, GDB will not use agent, even if such is supported by the target.Show debugger's willingness to use agent as a helper.Set debugger's willingness to use agent as a helper.Debugger's willingness to use agent in inferior as a helper is %s. onoffBFD backed targetYou should never see thisbl != NULLblockframe.cget_frame_blockpure virtual function calledbreakpoint.cw1 != NULLw2 != NULL!left->duplicate!right->duplicate(*blp)->refc > 0Unknown thread %d.Catch requires an event name.bpnumCatchpoint %d (%s)Catchpoint %d (exec)Catchpoint %d (vfork)Catchpoint %d (fork)loc1->owner != NULLloc2->owner != NULLunknown breakpoint typebl->owner != NULLbl->owner->type != bp_none thread %d task %ddprintf %s%scatch execcatch vforkcatch forkftracestraceunhandled tracepoint type %d passcount %d Invalid watchpoint type.break-range %s, %sunhandled breakpoint type %dNo breakpoint number %d.Note: breakpoint Note: breakpoints (all threads) (thread %d) (disabled) (permanent)%s%s also set at pc Junk at end of expressionNothing to save. condition $bpnum %s ignore $bpnum %d commands end disable disable $bpnum.%d set default-collect %s Saved to file '%s'. save No breakpoint number %d. No breakpoints specified.unload of library matching %sunload of librarycatch-typedefault collect , program " marker id is Masked hardware watchpoint hw-rwpthw-awpt mask Hardware watchpoint Hardware read watchpoint (%s) pending.: file %s, line %d. (%d locations)TracepointFast tracepointStatic tracepointTemporary breakpointBreakpointDprintf %dcatch syscallCatchpoint %d (syscallsCatchpoint %d (syscall '%s' [%d]Catchpoint %d (any syscall)syscalls "syscall "%s%s, %s%d, Bad breakpoint number '%s'!state->finishedtracepoint numberNo tracepoint number %d. Junk at end of arguments.teval call (void) %s (%s,%s)call (void) %s (%s)agent-printf %sInvalid dprintf style.printf_line != NULLtcatch bkptno (throw) (catch)exception throwexception catcha breakpoint numberbad breakpoint number: '%s'Junk after thread keyword.Junk after task keyword.Unknown task %d. Inferior unloaded Inferior loaded added Temporary catchpoint Catchpoint disp (exec'd new-exec (exception caught), (exception thrown), (call to syscall (returned from syscall syscall-numbersyscall-name, process (vforked process newpid (forked process loc->owner != NULLloc != NULL %s mask 0x%sbs->bp_location_at != NULL Old value = New value = Value = Watchpoint %d deleted. bs->breakpoint_at != NULL Watchpoint wpnumprobe not found address range: [%s, %s]bl && bl->next == NULL Temporary ranged breakpoint Ranged breakpoint Temporary breakpoint Breakpoint enable enable breakpoints disable disadelbrebreastop Break in function or address.Catch calls to fork.Catch calls to vfork.Catch calls to exec.can-use-hw-watchpointstratracsave tracepointssave-tracepointsset breakpoint show breakpoint auto-hwalways-insertedcondition-evaluationbreak-rangedprintf-styledprintf-functiondprintf-channeldisconnected-dprintfloc->pspace != NULLsal.pspace != NULLsals.nelts > 0Format string required*%sNo line %d in file "%s".bpstat_what: bp_jit_event Cannot insert breakpoint %d. breakpoint #%d b->ops != NULLNow in Warning: bl->address >= startbl->address < endtpnumInvalid regexp (%s): %sCannot enable watchpoint %d: Bad breakpoint argument: '%s'_ovly_debug_eventlibc-probe-stap libc:longjmpstd::terminate()libgcc-probe-stap libgcc:unwind_Unwind_DebugHookbpt != NULLDelete all tracepoints? Junk at end of command.* (%s *) %s-location %.*sDelete all breakpoints? !bploc->inserted__cxa_throw__cxa_begin_catchUsage: stop at tp != NULLevaluated-by!loc || loc_number != 0 inf task stop only in stack frame at trace only if stop only if evals) stop only in thread catchpoint tracepoint breakpoint already hit time times ignore next hits disable after additional trace buffer usage traceframe-usage bytes pass count installed not installed on target original-locationbkptBreakpointTableNumDispNo tracepoints. No tracepoint matching '%s'. No watchpoints. No watchpoint matching '%s'. marker %s not foundsafe_growUnknown syscall name '%s'.No source file specified.No breakpoint at %s.No breakpoint at this line.Deleted breakpoint Deleted breakpoints No address range specified.Too few arguments.Address range too large.?deleted?hw breakpointhw watchpointread watchpointacc watchpointlongjmp resumelongjmp for call dummyexception resumehigh-priority step resumewatchpoint scopestd::terminateshlib eventsthread eventsoverlay eventslongjmp masterstd::terminate masterexception masterfast tracepointstatic tracepointjit eventsSTT_GNU_IFUNC resolverSTT_GNU_IFUNC resolver return_longjmp_siglongjmpdstpkeepbptypes table does not describe type #%d.b->related_breakpoint->type == bp_watchpoint_scopeb->related_breakpoint->related_breakpoint == bbl->owner->type == bp_hardware_breakpointMay only run agent-printf on the targetCould not find location of the end of the range.Specify the type of breakpoint to set. Usage: stop in stop at single_step_breakpoints[0] != NULLbl->owner->ops != NULL && bl->owner->ops->remove_location != NULLCould not remove hardware watchpoint %d.Breakpoint condition evaluation mode is %s (currently %s). Breakpoint condition evaluation mode is %s. Always inserted breakpoint mode is %s (currently %s). Always inserted breakpoint mode is %s. Automatic usage of hardware breakpoints is %s. Debugger's behavior regarding pending breakpoints is %s. Debugger's willingness to use watchpoint hardware is %s. b->type == bp_hardware_breakpointHardware assisted ranged breakpoint %d from %s to %s.Setting tracepoint %d's passcount to %d Ignore count ignored for tracepoint %d.Will stop next time breakpoint %d is reached.Will ignore next crossing of breakpoint %d.Will ignore next %d crossings of breakpoint %d.Breakpoint %d now unconditional. No format string following the locationArgument required (file name in which to save)Unable to open file '%s' for saving (%s)"save" must be followed by the name of a save subcommand. one or more breakpoint numbersbad breakpoint number at or near '%s'self->type == bp_static_tracepointstatic-tracepoint-marker-string-idMasked hardware read watchpoint Masked hardware access (read/write) watchpoint Invalid hardware watchpoint type.b->loc && b->loc->next == NULLHardware access (read/write) watchpoint at gnu-indirect-function resolverHardware assisted breakpoint %dBreakpoint %d address previously adjusted from %s to %s.Breakpoint address adjusted from %s to %s.Target does not support this type of hardware watchpoint.There are not enough available hardware resources for this watchpoint.Expression cannot be implemented with read/access watchpoint.Watchpoint %d deleted because the program has left the block in which its expression is valid. Bad breakpoint location number '%s'bad tracepoint number at or near '%s' Tracepoint argument missing and no previous tracepoint passcount command requires an argument (count + optional TP num)The 'while-stepping' command can only be used for tracepointsThe 'collect' command can only be used for tracepointsThe 'teval' command can only be used for tracepointsThe 'while-stepping' command cannot be used for fast tracepointThe 'while-stepping' command cannot be used for static tracepointThe 'while-stepping' command can be used only oncewhile_stepping->body_count == 1The 'while-stepping' command cannot be nestedType commands for breakpoint(s) %s, one per line.Bad format string, missing '"'.No function supplied for dprintf callTarget cannot run dprintf commands, falling back to GDB printfSecond argument (specified ignore-count) is missing.single_step_breakpoints[1] == NULLCould not insert single-step breakpoint at %sTemporarily disabling breakpoints for unloaded shared library "%s"Stopped due to shared library event: Stopped due to shared library event (no libraries added or removed) Thread Event Breakpoint: gdb should not stop! Overlay Event Breakpoint: gdb should not stop! Longjmp Master Breakpoint: gdb should not stop! std::terminate Master Breakpoint: gdb should not stop! Exception Master Breakpoint: gdb should not stop! print_bp_stop_message: unrecognized enum valueloc->pspace == current_program_space Check the underlying instruction at PC for the memory address and value which triggered this watchpoint. Error evaluating expression for watchpoint %d is_watchpoint (bs->breakpoint_at) deleted because the program has left the block in which its expression is valid. Set ignore-count of breakpoint number N to COUNT. Usage is `ignore N COUNT'.Set commands to be executed when a breakpoint is hit. Give breakpoint number as argument after "commands". With no argument, the targeted breakpoint is the last one set. The commands themselves follow starting on the next line. Type a line containing "end" to indicate the end of them. Give "silent" as the first line to make the breakpoint silent; then no output is printed when it is hit, except what the commands print.Specify breakpoint number N to break only if COND is true. Usage is `condition N COND', where N is an integer and COND is an expression to be evaluated whenever breakpoint N is reached.Set a temporary breakpoint. Like "break" except the breakpoint is only temporary, so it will be deleted when hit. Equivalent to "break" followed by using "enable delete" on the breakpoint number. tbreak [PROBE_MODIFIER] [LOCATION] [thread THREADNUM] [if CONDITION] PROBE_MODIFIER shall be present if the command is to be placed in a probe point. Accepted values are `-probe' (for a generic, automatically guessed probe type) or `-probe-stap' (for a SystemTap probe). LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of the selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if their conditions are different. Do "help breakpoints" for info on other commands dealing with breakpoints.Set a hardware assisted breakpoint. Like "break" except the breakpoint requires hardware support, some target hardware may not have this support. hbreak [PROBE_MODIFIER] [LOCATION] [thread THREADNUM] [if CONDITION] PROBE_MODIFIER shall be present if the command is to be placed in a probe point. Accepted values are `-probe' (for a generic, automatically guessed probe type) or `-probe-stap' (for a SystemTap probe). LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of the selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if their conditions are different. Do "help breakpoints" for info on other commands dealing with breakpoints.Set a temporary hardware assisted breakpoint. Like "hbreak" except the breakpoint is only temporary, so it will be deleted when hit. thbreak [PROBE_MODIFIER] [LOCATION] [thread THREADNUM] [if CONDITION] PROBE_MODIFIER shall be present if the command is to be placed in a probe point. Accepted values are `-probe' (for a generic, automatically guessed probe type) or `-probe-stap' (for a SystemTap probe). LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of the selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if their conditions are different. Do "help breakpoints" for info on other commands dealing with breakpoints.Enable some breakpoints. Give breakpoint numbers (separated by spaces) as arguments. With no subcommand, breakpoints are enabled until you command otherwise. This is used to cancel the effect of the "disable" command. With a subcommand you can enable temporarily.Enable some breakpoints. Give breakpoint numbers (separated by spaces) as arguments. This is used to cancel the effect of the "disable" command. May be abbreviated to simply "enable". Enable breakpoints for one hit. Give breakpoint numbers. If a breakpoint is hit while enabled in this fashion, it becomes disabled.Enable breakpoints and delete when hit. Give breakpoint numbers. If a breakpoint is hit while enabled in this fashion, it is deleted.Enable breakpoints for COUNT hits. Give count and then breakpoint numbers. If a breakpoint is hit while enabled in this fashion, the count is decremented; when it reaches zero, the breakpoint is disabled.Disable some breakpoints. Arguments are breakpoint numbers with spaces in between. To disable all breakpoints, give no argument. A disabled breakpoint is not forgotten, but has no effect until re-enabled.Disable some breakpoints. Arguments are breakpoint numbers with spaces in between. To disable all breakpoints, give no argument. A disabled breakpoint is not forgotten, but has no effect until re-enabled. This command may be abbreviated "disable".Delete some breakpoints or auto-display expressions. Arguments are breakpoint numbers with spaces in between. To delete all breakpoints, give no argument. Also a prefix command for deletion of other GDB objects. The "unset" command is also an alias for "delete".Delete some breakpoints. Arguments are breakpoint numbers with spaces in between. To delete all breakpoints, give no argument. Delete some breakpoints or auto-display expressions. Arguments are breakpoint numbers with spaces in between. To delete all breakpoints, give no argument. This command may be abbreviated "delete".Clear breakpoint at specified line or function. Argument may be line number, function name, or "*" and an address. If line number is specified, all breakpoints in that line are cleared. If function is specified, breakpoints at beginning of function are cleared. If an address is specified, breakpoints at that address are cleared. With no argument, clears all breakpoints in the line that the selected frame is executing in. See also the "delete" command which clears breakpoints by number.Set breakpoint at specified line or function. break [PROBE_MODIFIER] [LOCATION] [thread THREADNUM] [if CONDITION] PROBE_MODIFIER shall be present if the command is to be placed in a probe point. Accepted values are `-probe' (for a generic, automatically guessed probe type) or `-probe-stap' (for a SystemTap probe). LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of the selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if their conditions are different. Do "help breakpoints" for info on other commands dealing with breakpoints.Break in function/address or break at a line in the current file.Break at a line in the current file.Status of user-settable breakpoints, or breakpoint number NUMBER. The "Type" column indicates one of: breakpoint - normal breakpoint watchpoint - watchpoint The "Disp" column contains one of "keep", "del", or "dis" to indicate the disposition of the breakpoint after it gets hit. "dis" means that the breakpoint will be disabled. The "Address" and "What" columns indicate the address and file/line number respectively. Convenience variable "$_" and default examine address for "x" are set to the address of the last breakpoint listed unless the command is prefixed with "server ". Convenience variable "$bpnum" contains the number of the last breakpoint set.Status of specified breakpoints (all user-settable breakpoints if no argument). The "Type" column indicates one of: breakpoint - normal breakpoint watchpoint - watchpoint The "Disp" column contains one of "keep", "del", or "dis" to indicate the disposition of the breakpoint after it gets hit. "dis" means that the breakpoint will be disabled. The "Address" and "What" columns indicate the address and file/line number respectively. Convenience variable "$_" and default examine address for "x" are set to the address of the last breakpoint listed unless the command is prefixed with "server ". Convenience variable "$bpnum" contains the number of the last breakpoint set.Status of all breakpoints, or breakpoint number NUMBER. The "Type" column indicates one of: breakpoint - normal breakpoint watchpoint - watchpoint longjmp - internal breakpoint used to step through longjmp() longjmp resume - internal breakpoint at the target of longjmp() until - internal breakpoint used by the "until" command finish - internal breakpoint used by the "finish" command The "Disp" column contains one of "keep", "del", or "dis" to indicate the disposition of the breakpoint after it gets hit. "dis" means that the breakpoint will be disabled. The "Address" and "What" columns indicate the address and file/line number respectively. Convenience variable "$_" and default examine address for "x" are set to the address of the last breakpoint listed unless the command is prefixed with "server ". Convenience variable "$bpnum" contains the number of the last breakpoint set.Set catchpoints to catch events.Set temporary catchpoints to catch events.Catch an exception, when caught.Catch an exception, when thrown.Catch loads of shared libraries. Usage: catch load [REGEX] If REGEX is given, only stop for libraries matching the regular expression.Catch unloads of shared libraries. Usage: catch unload [REGEX] If REGEX is given, only stop for libraries matching the regular expression.Catch system calls by their names and/or numbers. Arguments say which system calls to catch. If no arguments are given, every system call will be caught. Arguments, if given, should be one or more system call names (if your system supports that), or system call numbers.Set a watchpoint for an expression. Usage: watch [-l|-location] EXPRESSION A watchpoint stops execution of your program whenever the value of an expression changes. If -l or -location is given, this evaluates EXPRESSION and watches the memory to which it refers.Set a read watchpoint for an expression. Usage: rwatch [-l|-location] EXPRESSION A watchpoint stops execution of your program whenever the value of an expression is read. If -l or -location is given, this evaluates EXPRESSION and watches the memory to which it refers.Set a watchpoint for an expression. Usage: awatch [-l|-location] EXPRESSION A watchpoint stops execution of your program whenever the value of an expression is either read or written. If -l or -location is given, this evaluates EXPRESSION and watches the memory to which it refers.Status of specified watchpoints (all watchpoints if no argument).If zero, gdb will not use hardware for new watchpoints, even if such is available. (However, any hardware watchpoints that were created before setting this to nonzero, will continue to use watchpoint hardware.)Show debugger's willingness to use watchpoint hardware.Set debugger's willingness to use watchpoint hardware.Set a tracepoint at specified line or function. trace [PROBE_MODIFIER] [LOCATION] [thread THREADNUM] [if CONDITION] PROBE_MODIFIER shall be present if the command is to be placed in a probe point. Accepted values are `-probe' (for a generic, automatically guessed probe type) or `-probe-stap' (for a SystemTap probe). LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of the selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if their conditions are different. Do "help breakpoints" for info on other commands dealing with breakpoints. Do "help tracepoints" for info on other tracepoint commands.Set a fast tracepoint at specified line or function. ftrace [PROBE_MODIFIER] [LOCATION] [thread THREADNUM] [if CONDITION] PROBE_MODIFIER shall be present if the command is to be placed in a probe point. Accepted values are `-probe' (for a generic, automatically guessed probe type) or `-probe-stap' (for a SystemTap probe). LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of the selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if their conditions are different. Do "help breakpoints" for info on other commands dealing with breakpoints. Do "help tracepoints" for info on other tracepoint commands.Set a static tracepoint at specified line, function or marker. strace [LOCATION] [if CONDITION] LOCATION may be a line number, function name, "*" and an address, or -m MARKER_ID. If a line number is specified, probe the marker at start of code for that line. If a function is specified, probe the marker at start of code for that function. If an address is specified, probe the marker at that exact address. If a marker id is specified, probe the marker with that name. With no LOCATION, uses current execution address of the selected stack frame. Static tracepoints accept an extra collect action -- ``collect $_sdata''. This collects arbitrary user data passed in the probe point call to the tracing library. You can inspect it when analyzing the trace buffer, by printing the $_sdata variable like any other convenience variable. CONDITION is a boolean expression. Multiple tracepoints at one place are permitted, and useful if their conditions are different. Do "help breakpoints" for info on other commands dealing with breakpoints. Do "help tracepoints" for info on other tracepoint commands.Status of specified tracepoints (all tracepoints if no argument). Convenience variable "$tpnum" contains the number of the last tracepoint set.Delete specified tracepoints. Arguments are tracepoint numbers, separated by spaces. No argument means delete all tracepoints.Disable specified tracepoints. Arguments are tracepoint numbers, separated by spaces. No argument means disable all tracepoints.Enable specified tracepoints. Arguments are tracepoint numbers, separated by spaces. No argument means enable all tracepoints.Set the passcount for a tracepoint. The trace will end when the tracepoint has been passed 'count' times. Usage: passcount COUNT TPNUM, where TPNUM may also be "all"; if TPNUM is omitted, passcount refers to the last tracepoint defined.Save breakpoint definitions as a script.Save current breakpoint definitions as a script. This includes all types of breakpoints (breakpoints, watchpoints, catchpoints, tracepoints). Use the 'source' command in another debug session to restore them.Save current tracepoint definitions as a script. Use the 'source' command in another debug session to restore them.Breakpoint specific settings Configure various breakpoint-specific variables such as pending breakpoint behaviorIf on, an unrecognized breakpoint location will cause gdb to create a pending breakpoint. If off, an unrecognized breakpoint location results in an error. If auto, an unrecognized breakpoint location results in a user-query to see if a pending breakpoint should be created.Show debugger's behavior regarding pending breakpoints.Set debugger's behavior regarding pending breakpoints.If set, the debugger will automatically use hardware breakpoints for breakpoints set with "break" but falling in read-only memory. If not set, a warning will be emitted for such breakpoints.Show automatic usage of hardware breakpoints.Set automatic usage of hardware breakpoints.When this mode is off, breakpoints are inserted in inferior when it is resumed, and removed when execution stops. When this mode is on, breakpoints are inserted immediately and removed only when the user deletes the breakpoint. When this mode is auto (which is the default), the behaviour depends on the non-stop setting (see help set non-stop). In this case, if gdb is controlling the inferior in non-stop mode, gdb behaves as if always-inserted mode is on; if gdb is controlling the inferior in all-stop mode, gdb behaves as if always-inserted mode is off.Show mode for inserting breakpoints.Set mode for inserting breakpoints.When this is set to "host", breakpoint conditions will be evaluated on the host's side by GDB. When it is set to "target", breakpoint conditions will be downloaded to the target (if the target supports such feature) and conditions will be evaluated on the target's side. If this is set to "auto" (default), this will be automatically set to "target" if it supports condition evaluation, otherwise it will be set to "gdb"Show mode of breakpoint condition evaluation.Set mode of breakpoint condition evaluation.Set a breakpoint for an address range. break-range START-LOCATION, END-LOCATION where START-LOCATION and END-LOCATION can be one of the following: LINENUM, for that line in the current file, FILE:LINENUM, for that line in that file, +OFFSET, for that number of lines after the current line or the start of the range FUNCTION, for the first line in that function, FILE:FUNCTION, to distinguish among like-named static functions. *ADDRESS, for the instruction at that address. The breakpoint will stop execution of the inferior whenever it executes an instruction at any address within the [START-LOCATION, END-LOCATION] range (including START-LOCATION and END-LOCATION).Set a dynamic printf at specified line or function. dprintf location,format string,arg1,arg2,... location may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. This setting chooses how GDB will do a dynamic printf. If the value is "gdb", then the printing is done by GDB to its own console, as with the "printf" command. If the value is "call", the print is done by calling a function in your program; by default printf(), but you can choose a different function or output stream by setting dprintf-function and dprintf-channel.Show the style of usage for dynamic printf.Set the style of usage for dynamic printf.Show the function to use for dynamic printfSet the function to use for dynamic printfShow the channel to use for dynamic printfSet the channel to use for dynamic printfUse this to let dprintf commands continue to hit and produce output even if GDB disconnects or detaches from the target.Show whether dprintf continues after GDB disconnects.Set whether dprintf continues after GDB disconnects.agent-printf "printf format string", arg1, arg2, arg3, ..., argn (target agent only) This is useful for formatted output in user-defined commands.No hardware breakpoint support in the target.Hardware breakpoints used exceeds limit.Probed static tracepoint marker "%s" Couldn't determine the static tracepoint marker to probeGarbage '%s' follows conditionGarbage '%s' at end of commandbpstat_what: tracepoint encounteredbpstat_what: unhandled bptype %dreading through apparently deleted breakpoint #%d?bl->target_info.shadow_contents >= readbuf + len || readbuf >= (bl->target_info.shadow_contents + bl->target_info.shadow_len)Cannot detach breakpoints of inferior_ptidNote: automatically using hardware breakpoints for read-only addresses. cannot set software breakpoint at readonly address %shardware breakpoint %d not supported in overlay!Overlay breakpoint %d failed: in ROM? Temporarily disabling shared library breakpoints: Cannot insert hardware breakpoint %d%sError accessing memory address bl->owner->ops != NULL && bl->owner->ops->insert_location != NULLError inserting catchpoint %d: Your system does not support this type of catchpoint.Error inserting catchpoint %d.static tracepoint %d changed probed marker from %s to %smarker for static tracepoint %d (%s) not found at previous line numberCould not insert hardware watchpoint %d. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. is_hardware_watchpoint (loc2->owner)warning: Error removing breakpoint %d allegedly permanent breakpoint is not actually insertedanother breakpoint was inserted on top of a permanent breakpointTarget does not support breakpoint condition evaluation. Using host evaluation mode instead.new_b->related_breakpoint == new_b!frame_id_artificial_p (frame_id)Couldn't get information on specified line.VEC_length (linespec_sals, canonical->sals) == 1unsupported or unknown fork kind; cannot catch itCannot set a condition where a Python 'stop' method has been defined in the breakpoint.Error in re-setting breakpoint %d: Could not reset ranged breakpoint %d: multiple locations found failed to reevaluate condition for breakpoint %d: %sYou can specify only one thread.Invalid thread ID specification %s.You can specify only one mask.Cannot watch constant value `%.*s'.This target does not support masked watchpoints.Invalid mask or memory region.Make %s pending on future shared library load? May not have a fast tracepoint at 0x%s%sMultiple breakpoints were set. Use the "delete" command to delete unwanted breakpoints.Unsupported or unknown exception event; cannot catch itUsage: stop in Uploaded tracepoint %d has no source location, using raw addressUploaded tracepoint %d condition has no source form, ignoring itUploaded tracepoint %d actions have no source form, ignoring themError in testing breakpoint condition: Watchpoint condition cannot be tested in the current scopetotal_width < sizeof wrap_indentb->loc == NULL || b->loc->next == NULLprint_one_breakpoint: bp_none encountered No breakpoints or watchpoints. No breakpoint or watchpoint matching '%s'. No known static tracepoint marker named %sThe feature 'catch syscall' is not supported on this architecture yet.VEC_length (linespec_sals, canonical.sals) < 2No default breakpoint address now.This target does not support hardware ranged breakpoints.Could not find location of the beginning of the range.Cannot create a ranged breakpoint with multiple locations.Invalid address range, end precedes start.CbаCbАCbаCbаCbpCbXCbXCbXCbаCbаCbаCbаCbаCbаCbаCbаCbаCbаCbаCbаCbаCbаCbаCbаCbpCbpCbpCbpCbаCbаCbаCbаCb╕Цb╨ЦbрЦbЁЦbАЦbиЦbК╫b8╪b8╪b8╪b8╪bА╫bА╫bА╫bА╫b┘b┘b┘b┘b┘bр╪b└╪bf╪b░╪bШ╪b8╪bf╪bf╪bf╪bf╪bf╪bА╫bp╪bp╪bp╪b`╪b0┘bf╪bК╫bг?cdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcdCcг?cdCcг?cdCcdCcdCcг?cг?cг?cdCcг?cг?cdCcdCcdCcг?cdCcdCcг?cdCcdCc3Ccг?cdCcг?cг?cг?cг?cг?cdCcdCcdCcdCcdCcdCcdCcг?cг?cг?cdCcdCcdCcг?cdCcг?cг?cг?cг?cг?cг?cг?cг?cг?cг?cг?cdCcг?cг?cг?cг?cг?cг?cг?cг?cг?cг?cг?cdCcdCcdCcг?cdCcг?cdCcdCcbase_breakpoint_decode_linespecbase_breakpoint_create_breakpoints_salbase_breakpoint_create_sals_from_addressbase_breakpoint_print_recreatebase_breakpoint_print_mentionbase_breakpoint_print_itbase_breakpoint_works_in_software_modebase_breakpoint_resources_neededbase_breakpoint_breakpoint_hitbase_breakpoint_remove_locationbase_breakpoint_insert_locationр9b`оСeоСjоСqоСuоСzоСautohosttargetgdbcallagentupdate_dprintf_command_listVEC_linespec_sals_quick_pushVEC_linespec_sals_indexupdate_global_location_listbp_location_target_extensions_updateremove_breakpointremove_breakpoint_1VEC_bp_location_p_quick_pushdecref_bp_locationbreakpoint_locations_matchwatchpoint_locations_matchswap_insertioninsert_bp_locationVEC_agent_expr_p_quick_pushо7Сr5С╕7С°QП~QПш7С╞7С╘7Сф7С │3С є7С8СiЦ 8С88С*8СD8С8СU8Сd8Сq8С8СО8СЭ8С│8СZ5Сf5С─8С╘8С.2Сц8Сё8С 9Сprint_one_breakpoint_locationnynnyhost or targetwrap_indent_at_fieldVEC_int_quick_pushinit_raw_breakpoint_without_locationwatchpoint_del_at_next_stopVEC_breakpoint_p_quick_pushVEC_breakpoint_p_indexVEC_breakpoint_p_ordered_removeVEC_char_ptr_quick_pushvalidate_commands_for_breakpointaddr_string_to_salsVEC_static_tracepoint_marker_p_indexVEC_int_indexVEC_int_safe_growinit_breakpoint_salinit_raw_breakpointadd_location_to_breakpointset_breakpoint_location_functionbp_loc_is_permanentdecode_linespec_defaultcreate_breakpoints_saltracepoint_print_one_detailprint_one_detail_masked_watchpointprint_it_masked_watchpointprint_it_watchpointcheck_status_watchpointbpstat_check_watchpointwatchpoint_checkprint_mention_ranged_breakpointprint_one_detail_ranged_breakpointprint_one_ranged_breakpointprint_it_ranged_breakpointbkpt_print_itbkpt_resources_neededbpstat_check_locationget_tracepoint_by_numbercreate_tracepoint_from_uploadremove_single_step_breakpointsinsert_single_step_breakpoint│3С&9С09С/9Сdelete_breakpointVEC_bp_location_p_unordered_removecreate_breakpointset_momentary_breakpointset_longjmp_breakpoint_for_call_dummyinit_bp_locationbpstat_check_breakpoint_conditionsupdate_breakpoints_after_execbreakpoint_xfer_memoryх0С;9С4Е@9СCatch signals by their names and/or numbers. Usage: catch signal [[NAME|NUMBER] [NAME|NUMBER]...|all] Arguments say which signals to catch. If no arguments are given, every "normal" signal will be caught. The argument "all" means to also catch signals used by GDB. Arguments, if given, should be one or more signal names (if your system supports that), or signal numbers.Catchpoint %d (standard signals)'all' cannot be caught with other signalscatch signal allCatchpoint %d (signalsCatchpoint %d (signalCatchpoint %d (any signal)signals "signal " Catchpoint %d (signal %s), signal_catch_counts[iter] > 0break-catch-sig.csignal_catch_counts[i] > 0Unknown signal name '%s'.signal_catchpoint_remove_locationcatch_signal_split_argsVEC_gdb_signal_type_quick_pushfindvar.clang != NULLdata->result == NULLNo global symbol "%s".VALUE_LVAL (value) == lval_registerlang->la_read_var_value != NULLThat operation is not available on integers of more than %d bytes.regnum < (gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch))frame_id_p (get_frame_id (frame))store_typed_address: type is not a pointer or referenceextract_typed_address: type is not a pointer or referenceUnknown argument list address for `%s'.Cannot look up value of a typedef `%s'.Value of register variable not available for `%s'.Cannot look up value of a botched symbol `%s'.╖c(║c║c╕╣cИ╣c@╣c╕╣c(╣c╣c░╕cА╕c@╕cа╖cР╖c`╖caddress_from_registerread_frame_register_valueread_var_valuedefault_read_var_valueminsym_lookup_iterator_cbvalue_of_register_lazyForce gdb to flush its register cache (maintainer command)Print the internal register configuration. Takes an optional file parameter.Print the internal register configuration including raw values. Takes an optional file parameter.Print the internal register configuration including cooked values. Takes an optional file parameter.Print the internal register configuration including each register's group. Takes an optional file parameter.Print the internal register configuration including each register's remote register number and buffer offset in the g/G packets. Takes an optional file parameter.regnum < regcache->descr->nr_raw_registersregnum < regcache->descr->nr_cooked_registersMAX_REGISTER_SIZE >= descr->sizeof_register[i]regcache != NULL && buf != NULLregnum >= 0 && regnum < regcache->descr->nr_raw_registersoffset >= 0 && offset <= descr->sizeof_register[regnum]len >= 0 && offset + len <= descr->sizeof_register[regnum]regnum >= 0 && regnum < descr->nr_cooked_registersregnum >= 0 && regnum < descr->nr_raw_registerssrc->descr->gdbarch == dst->descr->gdbarchdst->readonly_p && src->readonly_pregnum >=0 && regnum < regcache->descr->nr_cooked_registersregcache_write_pc: Unable to update PCregnum >=0 && regnum < regcache->descr->nr_raw_registersregnum >= 0 && regnum < regcache->descr->nr_cooked_registersregcache_read_pc: Unable to find PCregnum >= 0 && regnum < (gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch))regcache->descr->nr_cooked_registers == (gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch))*%d: Inconsistent register offsets. *%d: Register type's name NULL. maintenance print architecturesrc->readonly_p || dst->readonly_pflushregsraw-registerscooked-registersregister-groupsremote-registersregcache != NULLregcache.c!regcache->readonly_pBad switchread != NULLwrite != NULLsrc != NULL && dst != NULLPC register is not availableRegister cache flushed. dst->readonly_pstatus != REG_UNKNOWN %-10sNr %4sRel %6s %5s %4d %5ld %-15sRaw valueCooked valueGroupsRmt Nr g/G Offset%7d %11d %6ldsrc != dstbuiltin_typeregcache_dumpinit_regcache_descrregcache_raw_collectregcache_raw_supplyregcache_cooked_write_partregcache_xfer_partregcache_cooked_read_partregcache_raw_write_partregcache_raw_read_partregcache_cooked_writeregcache_raw_writeregcache_cooked_write_unsignedregcache_cooked_write_signedregcache_cooked_read_unsignedregcache_cooked_read_signedregcache_cooked_read_valueregcache_cooked_readregcache_raw_write_unsignedregcache_raw_write_signedregcache_raw_read_unsignedregcache_raw_read_signedregcache_raw_readregcache_xmalloc_1regcache_invalidateregcache_register_statusregcache_cpy_no_passthroughregcache_cpyregcache_saveregister_sizeregister_typeold_chain != NULLcleanups.cmake_my_cleanup2UTF-32UTF-%d%sUCS-%d%sConverting character sets\%.3oc >= 'A' && c <= 'F'charset.cLANGUAGELC_ALLiconvThe followingShow the host character set.Set the host character set.host-charsetSet the target character set.target-charsettarget-wide-charset500V18859_18859_28859_38859_48859_58859_68859_78859_88859_910646-1:1993ANSI_X3.4-1968ANSI_X3.4-1986ANSI_X3.4ANSI_X3.110-1983ANSI_X3.110ARABIC7ARMSCII-8ASMO-708ASMO_449BIG-5BIG-FIVEBIG5-HKSCSBIG5HKSCSBIGFIVEBRFBS_4730CN-BIG5CN-GBCP-ARCP-HUCP037CP038CP273CP274CP275CP278CP280CP281CP282CP284CP285CP290CP297CP367CP420CP423CP424CP437CP500CP737CP775CP803CP813CP819CP850CP851CP855CP856CP857CP860CP861CP862CP863CP864CP865CP866CP866NAVCP868CP869CP870CP871CP874CP875CP880CP891CP901CP902CP903CP904CP905CP912CP915CP916CP918CP920CP921CP922CP930CP932CP933CP935CP936CP937CP939CP950CP1004CP1008CP1025CP1026CP1046CP1047CP1070CP1079CP1081CP1084CP1089CP1097CP1112CP1122CP1123CP1124CP1125CP1129CP1130CP1132CP1133CP1137CP1140CP1141CP1142CP1143CP1144CP1145CP1146CP1147CP1148CP1149CP1153CP1154CP1155CP1156CP1157CP1158CP1160CP1161CP1162CP1163CP1164CP1166CP1167CP1250CP1251CP1252CP1253CP1254CP1255CP1256CP1257CP1258CP1282CP1364CP1371CP1388CP1390CP1399CP4517CP4899CP4909CP4971CP5347CP9030CP9066CP9448CP10007CP12712CP16804CPIBM861CSA7-1CSA7-2CSASCIICSA_T500-1983CSA_T500CSA_Z243.4-1985-1CSA_Z243.4-1985-2CSA_Z243.419851CSA_Z243.419852CSDECMCSCSEBCDICATDECSEBCDICATDEACSEBCDICCAFRCSEBCDICDKNOCSEBCDICDKNOACSEBCDICESCSEBCDICESACSEBCDICESSCSEBCDICFISECSEBCDICFISEACSEBCDICFRCSEBCDICITCSEBCDICPTCSEBCDICUKCSEBCDICUSCSEUCKRCSEUCPKDFMTJAPANESECSGB2312CSHPROMAN8CSIBM037CSIBM038CSIBM273CSIBM274CSIBM275CSIBM277CSIBM278CSIBM280CSIBM281CSIBM284CSIBM285CSIBM290CSIBM297CSIBM420CSIBM423CSIBM424CSIBM500CSIBM803CSIBM851CSIBM855CSIBM856CSIBM857CSIBM860CSIBM863CSIBM864CSIBM865CSIBM866CSIBM868CSIBM869CSIBM870CSIBM871CSIBM880CSIBM891CSIBM901CSIBM902CSIBM903CSIBM904CSIBM905CSIBM918CSIBM921CSIBM922CSIBM930CSIBM932CSIBM933CSIBM935CSIBM937CSIBM939CSIBM943CSIBM1008CSIBM1025CSIBM1026CSIBM1097CSIBM1112CSIBM1122CSIBM1123CSIBM1124CSIBM1129CSIBM1130CSIBM1132CSIBM1133CSIBM1137CSIBM1140CSIBM1141CSIBM1142CSIBM1143CSIBM1144CSIBM1145CSIBM1146CSIBM1147CSIBM1148CSIBM1149CSIBM1153CSIBM1154CSIBM1155CSIBM1156CSIBM1157CSIBM1158CSIBM1160CSIBM1161CSIBM1163CSIBM1164CSIBM1166CSIBM1167CSIBM1364CSIBM1371CSIBM1388CSIBM1390CSIBM1399CSIBM4517CSIBM4899CSIBM4909CSIBM4971CSIBM5347CSIBM9030CSIBM9066CSIBM9448CSIBM12712CSIBM16804CSIBM11621162CSISO4UNITEDKINGDOMCSISO10SWEDISHCSISO11SWEDISHFORNAMESCSISO14JISC6220ROCSISO15ITALIANCSISO16PORTUGESECSISO17SPANISHCSISO18GREEK7OLDCSISO19LATINGREEKCSISO21GERMANCSISO25FRENCHCSISO27LATINGREEK1CSISO49INISCSISO50INIS8CSISO51INISCYRILLICCSISO58GB1988CSISO60DANISHNORWEGIANCSISO60NORWEGIAN1CSISO61NORWEGIAN2CSISO69FRENCHCSISO84PORTUGUESE2CSISO85SPANISH2CSISO86HUNGARIANCSISO88GREEK7CSISO89ASMO449CSISO90CSISO92JISC62991984BCSISO99NAPLPSCSISO103T618BITCSISO111ECMACYRILLICCSISO121CANADIAN1CSISO122CANADIAN2CSISO139CSN369103CSISO141JUSIB1002CSISO143IECP271CSISO150CSISO150GREEKCCITTCSISO151CUBACSISO153GOST1976874CSISO646DANISHCSISO2022CNCSISO2022JPCSISO2022JP2CSISO2022KRCSISO2033CSISO5427CYRILLICCSISO5427CYRILLIC1981CSISO5428GREEKCSISO10367BOXCSISOLATIN1CSISOLATIN2CSISOLATIN3CSISOLATIN4CSISOLATIN5CSISOLATIN6CSISOLATINARABICCSISOLATINCYRILLICCSISOLATINGREEKCSISOLATINHEBREWCSKOI8RCSKSC5636CSMACINTOSHCSNATSDANOCSNATSSEFICSN_369103CSPC8CODEPAGE437CSPC775BALTICCSPC850MULTILINGUALCSPC862LATINHEBREWCSPCP852CSSHIFTJISCSUCS4CSUNICODECSWINDOWS31JCWI-2CWIDEC-MCSDIN_66003DS2089DS_2089E13BEBCDIC-AT-DE-AEBCDIC-AT-DEEBCDIC-BEEBCDIC-BREBCDIC-CA-FREBCDIC-CP-AR1EBCDIC-CP-AR2EBCDIC-CP-BEEBCDIC-CP-CAEBCDIC-CP-CHEBCDIC-CP-DKEBCDIC-CP-ESEBCDIC-CP-FIEBCDIC-CP-FREBCDIC-CP-GBEBCDIC-CP-GREBCDIC-CP-HEEBCDIC-CP-ISEBCDIC-CP-ITEBCDIC-CP-NLEBCDIC-CP-NOEBCDIC-CP-ROECEEBCDIC-CP-SEEBCDIC-CP-TREBCDIC-CP-USEBCDIC-CP-WTEBCDIC-CP-YUEBCDIC-CYRILLICEBCDIC-DK-NO-AEBCDIC-DK-NOEBCDIC-ES-AEBCDIC-ES-SEBCDIC-ESEBCDIC-FI-SE-AEBCDIC-FI-SEEBCDIC-FREBCDIC-GREEKEBCDIC-INTEBCDIC-INT1EBCDIC-IS-FRISSEBCDIC-ITEBCDIC-JP-EEBCDIC-JP-KANAEBCDIC-PTEBCDIC-UKEBCDIC-USEBCDICISFRISSECMA-114ECMA-118ECMA-128ECMA-CYRILLICELOT_928EUC-CNEUC-JISX0213EUC-JP-MSEUC-JPEUC-KREUC-TWEUCCNEUCJP-MSEUCJP-OPENEUCJP-WINEUCJPEUCTWGB13000GB18030GBKGB_1988-80GB_198880GEORGIAN-ACADEMYGEORGIAN-PSGOST_19768-74GOST_19768GOST_1976874GREEK-CCITTGREEK7-OLDHP-GREEK8HP-ROMAN8HP-ROMAN9HP-THAI8HP-TURKISH8HPGREEK8HPROMAN9HPTHAI8HPTURKISH8IBM-803IBM-856IBM-901IBM-902IBM-921IBM-922IBM-930IBM-932IBM-933IBM-935IBM-937IBM-939IBM-943IBM-1008IBM-1025IBM-1046IBM-1047IBM-1097IBM-1112IBM-1122IBM-1123IBM-1124IBM-1129IBM-1130IBM-1132IBM-1133IBM-1137IBM-1140IBM-1141IBM-1142IBM-1143IBM-1144IBM-1145IBM-1146IBM-1147IBM-1148IBM-1149IBM-1153IBM-1154IBM-1155IBM-1156IBM-1157IBM-1158IBM-1160IBM-1161IBM-1162IBM-1163IBM-1164IBM-1166IBM-1167IBM-1364IBM-1371IBM-1388IBM-1390IBM-1399IBM-4517IBM-4899IBM-4909IBM-4971IBM-5347IBM-9030IBM-9066IBM-9448IBM-12712IBM-16804IBM256IBM367IBM437IBM775IBM813IBM819IBM848IBM850IBM852IBM862IBM866NAVIBM874IBM875IBM912IBM915IBM916IBM920IBM1004IBM1046IBM1047IBM1089IBM1162IEC_P27-1IEC_P271INIS-8INIS-CYRILLICISIRI-3342ISIRI3342ISO-2022-CN-EXTISO-2022-CNISO-2022-JP-2ISO-2022-JP-3ISO-2022-JPISO-2022-KRISO-8859-1ISO-8859-2ISO-8859-3ISO-8859-4ISO-8859-5ISO-8859-6ISO-8859-7ISO-8859-8ISO-8859-9ISO-8859-9EISO-8859-10ISO-8859-11ISO-8859-13ISO-8859-14ISO-8859-15ISO-8859-16ISO-10646ISO-CELTICISO-IR-4ISO-IR-6ISO-IR-8-1ISO-IR-9-1ISO-IR-10ISO-IR-11ISO-IR-14ISO-IR-15ISO-IR-16ISO-IR-17ISO-IR-18ISO-IR-19ISO-IR-21ISO-IR-25ISO-IR-27ISO-IR-37ISO-IR-49ISO-IR-50ISO-IR-51ISO-IR-54ISO-IR-55ISO-IR-57ISO-IR-60ISO-IR-61ISO-IR-69ISO-IR-84ISO-IR-85ISO-IR-86ISO-IR-88ISO-IR-89ISO-IR-90ISO-IR-92ISO-IR-98ISO-IR-99ISO-IR-100ISO-IR-101ISO-IR-103ISO-IR-109ISO-IR-110ISO-IR-111ISO-IR-121ISO-IR-122ISO-IR-126ISO-IR-127ISO-IR-138ISO-IR-139ISO-IR-141ISO-IR-143ISO-IR-144ISO-IR-148ISO-IR-150ISO-IR-151ISO-IR-153ISO-IR-155ISO-IR-156ISO-IR-157ISO-IR-166ISO-IR-179ISO-IR-193ISO-IR-197ISO-IR-199ISO-IR-203ISO-IR-209ISO-IR-226ISO646-CAISO646-CA2ISO646-CNISO646-CUISO646-DEISO646-DKISO646-ESISO646-ES2ISO646-FIISO646-FRISO646-FR1ISO646-GBISO646-HUISO646-ITISO646-JP-OCR-BISO646-JPISO646-KRISO646-NOISO646-NO2ISO646-PTISO646-PT2ISO646-SEISO646-SE2ISO646-USISO646-YUISO2022CNEXTISO6937ISO8859-1ISO8859-2ISO8859-3ISO8859-4ISO8859-5ISO8859-6ISO8859-7ISO8859-8ISO8859-9ISO8859-9EISO8859-10ISO8859-11ISO8859-13ISO8859-14ISO8859-15ISO8859-16ISO11548-1ISO88591ISO88592ISO88593ISO88594ISO88595ISO88596ISO88597ISO88598ISO88599ISO88599EISO885910ISO885911ISO885913ISO885914ISO885915ISO885916ISO_646.IRV:1991ISO_2033-1983ISO_2033ISO_5427-EXTISO_5427ISO_5427:1981ISO_5427EXTISO_5428ISO_5428:1980ISO_6937-2ISO_6937-2:1983ISO_6937ISO_6937:1992ISO_8859-1ISO_8859-1:1987ISO_8859-2ISO_8859-2:1987ISO_8859-3ISO_8859-3:1988ISO_8859-4ISO_8859-4:1988ISO_8859-5ISO_8859-5:1988ISO_8859-6ISO_8859-6:1987ISO_8859-7ISO_8859-7:1987ISO_8859-7:2003ISO_8859-8ISO_8859-8:1988ISO_8859-9ISO_8859-9:1989ISO_8859-9EISO_8859-10ISO_8859-10:1992ISO_8859-14ISO_8859-14:1998ISO_8859-15ISO_8859-15:1998ISO_8859-16ISO_8859-16:2001ISO_9036ISO_10367-BOXISO_10367BOXISO_11548-1ISO_69372JIS_C6220-1969-ROJIS_C6229-1984-BJIS_C62201969ROJIS_C62291984BJOHABJSJUS_I.B1.002KOI-7KOI-8KOI8-RKOI8-RUKOI8-TKOI8-UKOI8KOI8UL1L2L3L5L10LATIN-9LATIN-GREEK-1LATIN-GREEKLATIN7LATIN8LATIN10MAC-CENTRALEUROPEMAC-ISMAC-SAMIMAC-UKMACISMACUKMACUKRAINIANMIKMS-ANSIMS-ARABMS-CYRLMS-EEMS-GREEKMS-HEBRMS-MAC-CYRILLICMS-TURKMS932MS936MSCP949MSCP1361MSMACCYRILLICMSZ_7795.3MS_KANJINATS-DANONATS-SEFINC_NC0010NC_NC00-10NC_NC00-10:81NF_Z_62-010NF_Z_62-010_(1973)NF_Z_62-010_1973NF_Z_62010NF_Z_62010_1973NS_4551-1NS_4551-2NS_45511NS_45512OS2LATIN1OSF00010001OSF00010002OSF00010003OSF00010004OSF00010005OSF00010006OSF00010007OSF00010008OSF00010009OSF0001000AOSF00010020OSF00010100OSF00010101OSF00010102OSF00010104OSF00010105OSF00010106OSF00030010OSF0004000AOSF0005000AOSF05010001OSF100201A4OSF100201A8OSF100201B5OSF100201F4OSF100203B5OSF1002011COSF1002011DOSF1002035DOSF1002035EOSF1002035FOSF1002036BOSF1002037BOSF10010001OSF10010004OSF10010006OSF10020025OSF10020111OSF10020115OSF10020116OSF10020118OSF10020122OSF10020129OSF10020352OSF10020354OSF10020357OSF10020359OSF10020360OSF10020364OSF10020365OSF10020366OSF10020367OSF10020370OSF10020387OSF10020388OSF10020396OSF10020402OSF10020417PT154RK1048RUSCIISEN_850200_BSEN_850200_CSHIFT-JISSHIFT_JISSHIFT_JISX0213SJIS-OPENSJIS-WINSJISSS636127STRK1048-2002ST_SEV_358-88T.61-8BITT.61T.618BITTCVN-5712TCVNTCVN5712-1TCVN5712-1:1993TIS-620TIS620-0TIS620.2529-1TIS620.2533-0TIS620TS-5881TSCIIUCS-2UCS-2BEUCS-2LEUCS-4UCS-4BEUCS-4LEUCS2UHCUJISUNICODEBIGUNICODELITTLEUS-ASCIIUTF-7UTF-16UTF-16BEUTF-16LEUTF-32BEUTF-32LEUTF7UTF16UTF16BEUTF16LEUTF32UTF32BEUTF32LEVISCIIWCHAR_TWIN-SAMI-2WINBALTRIMWINDOWS-31JWINDOWS-874WINDOWS-936WINDOWS-1250WINDOWS-1251WINDOWS-1252WINDOWS-1253WINDOWS-1254WINDOWS-1255WINDOWS-1256WINDOWS-1257WINDOWS-1258WINSAMI2WS2not necessarilythe FROM and TOlisted with severalThe target wide character set is "auto; currently %s". The target wide character set is "%s". The host character set is "auto; currently %s". The host character set is "%s". The target character set is "auto; currently %s". The target character set is "%s". Cannot convert between character sets `%s' and `%s'Unable to find a vaild charset for string conversionsInternal error while converting character setsCould not convert character to `%s' character setThe `host character set' is the one used by the system GDB is running on. The `target character set' is the one used by the program being debugged. You may only use supersets of ASCII for your host character set; GDB does not support any others. To see a list of the character sets GDB supports, type `set charset '.Show the host and target character sets.Set the host and target character sets.The `host character set' is the one used by the system GDB is running on. You may only use supersets of ASCII for your host character set; GDB does not support any others. To see a list of the character sets GDB supports, type `set host-charset '.The `target character set' is the one used by the program being debugged. GDB translates characters and strings between the host and target character sets as needed. To see a list of the character sets GDB supports, type `set target-charset'Show the target character set.The `target wide character set' is the one used by the program being debugged. In particular it is the encoding used by `wchar_t'. GDB translates characters and strings between the host and target character sets as needed. To see a list of the character sets GDB supports, type `set target-wide-charset'Show the target wide character set.Set the target wide character set.VEC_char_ptr_quick_pushЯ═СnєС~єСОєСhost_hex_valueLocal core dump filecorelow.c

.auxv.wcookie.note.linuxcore.siginfoSPU/%d/regs%ncore_vecToo many argumentsNo core file now. No core file specified.r+b"%s": Can't find sections: %sCore was generated by `%s'. "%s" is not a core dump: %s.reg/Use a core file as a target. Specify the filename of the core file.init_core_ops: core target already exists ("%s").Couldn't read NT_AUXV note in core file.Couldn't read StackGhost cookie in core file.Couldn't read SPU section in core file.Couldn't find %s registers in core file.Couldn't read %s registers from `%s' section in core file.Couldn't recognize %s registers in core file.Can't fetch registers from this type of core file No core file specified. (Use `detach' to stop debugging a core file.)"%s": ambiguous core format, %d handlers match"%s": no core file handler recognizes formatProgram terminated with signal %d, %s. ┬ dd`d┬ d┬ d┬ dРdрd┬ d┬ d┬ dшd┬ d┬ d dget_core_register_sectionfunc-name>: %s%02xopcodesinstasm_insnssrc_and_asm_lineline_asm_insndummy-frame.cdummy-frames id=Print the contents of the internal dummy-frame stack.maintenance print dummy-frames`Uv└-d .d░,ddummy_frame_prev_registerdummy_frame_this_iddummy_frame_popUnknown decimal floating point type.Comparison with an invalid number (NaN).Unknown decimal floating point operation.Conversion of large integer to a decimal floating type is not supported.Cannot perform operation: %sdfp.c%.30Lg╗:d `%s'. prev != NULLCanceledNo current source file. Current source file is %s Compilation directory is %s Located in %s Contains %d line%s. Source language is %s. Does not includeIncludes%s preprocessor macro info. Source directories searched: $cdir%c$cwdforward-searchreverse-searchlistsizesubstitute-pathSet how to display filenames.filename-display(mode & O_CREAT) == 0string != NULL$cdir%d %s in %d ^%c for address starts at address and ends at Warning: %s is not a directory.<>Expression not foundExpression not found Т ТТbasenamerelativeabsolutedelete_substitute_path_rulefind_source_linesopenpVEC_char_ptr_quick_pushDebugger convenience ("$foo") variables and functions. Convenience variables are created when you assign them values; thus, "set $foo=1" gives "$foo" the value 1. Values may be any type. A few convenience variables are given values automatically: "$_"holds the last address examined with "x" or "info lines", "$__" holds the contents of the last address examined with "x".Elements of value history around item number IDX (or last ten).Initialize a convenience variable if necessary. init-if-undefined VARIABLE = EXPRESSION Set an internal VARIABLE to the result of the EXPRESSION if it does not exist or does not contain a value. The EXPRESSION is not evaluated if the VARIABLE is already initialized.Placeholder command for showing help on convenience functions.Init-if-undefined requires an assignment expression.The first parameter to init-if-undefined should be a GDB variable.Unexpected type (%d) encountered for integer constant.Value does not fit in %d bits.VALUE_LVAL (func) == lval_internalvarVALUE_LVAL (val) == lval_internalvarvalue->lval != lval_internalvar && value->lval != lval_internalvar_componentvalue_lval_const (v) == lval_computedunexpected field location kindValue can't be converted to integer.Invalid floating value found in program.Unexpected type encountered for floating constant.Unexpected type (%d) encountered for unsigned integer constant.Cannot overwrite convenience function %sNo debugger convenience variables now defined. Convenience variables have names starting with "$"; use "set" as in "set $foo = 5" to define them. History does not go back to $$%d.History has not yet reached $%d.value_bytes_available (dst, dst_offset, length)convenienceinit-if-undefinedfunction value has been optimized outFunction return type unknown.v->lval == lval_computed!value->lazyval->reference_count > 0value is not availableset_internalvar_componentbad kind$%s = The history is empty.!val1->lazy && !val2->lazyoriginal_value != NULLblock_remove!dst->lazy && !src->lazy_АdБd_Аd_Аd_АdЁАdЁАd_АdЁАdрАd_Аd_АdЁАd_Аd_Аd_Аd_АdЁАdБdЁАdЁАd_Аd╚Аd_АdРАd@Ьd ЬdЬdшЫdШЫd`Ьdunpack_value_field_as_longunpack_value_bits_as_longvalue_static_fieldcall_internal_functionvalue_internal_function_nameset_internalvarVEC_char_ptr_quick_pushvalue_freeset_value_addressvalue_computed_closurevalue_computed_funcsvalue_contents_copy_rawvalue_contents_for_printing_constvalue_available_contents_eqVEC_range_s_indexVEC_range_s_quick_insertVEC_range_s_block_removevalue_bytes_availableА_Can't get dimensions for a non-array typetuple range index out of rangeAttempt to take address of register or constant.Attempt to take address of value not located in memory.Symbol "%s" does not have any specific entry valueValue of register %s not available.don't know which variant you want to set(power)set type with unknown sizePOWERSET tuple elements of different modeincompatible POWERSET tuple elementsPOWERSET tuple element out of rangeno 'respondsTo:' or 'respondsToSelector:' methodno 'methodFor:' or 'methodForSelector:' methodTarget does not respond to this message selector.method address has symbol information with non-function type; skippingExpression of type other than "method returning ..." used as a methodNon-pointer-to-member value used in pointer-to-member constructCall to overloaded function %s requires `this' pointerCannot evaluate function -- may be inlinedExpression of type other than "Function returning ..." used as functionCannot perform substring on this typeTYPE_CODE (value_type (arg2)) == TYPE_CODE_PTRnon-pointer-to-member value used in pointer-to-member construct':' operator used in invalid contextToo many subscripts for F77 (%d Max)Non-integral right operand for "@" operator.Attempt to dereference pointer to member without an objectAttempt to take contents of a non-pointer value.Attempt to use a type name as an expressionAttempt to use a type as an expressionGDB does not (yet) know how to evaluate that kind of expressionInternal error in eval_type.tuple index out of rangeRegister $%s not available.too many initializersToo many array elementsempty POWERSET tuple rangeobjc_msg_lookuprespondsToSelector:respondsTo:methodForSelector:methodFor:eval.cstructure pointerstructurenum_types == 0Wrong number of subscriptsnargs > 0╗d║d║d║d║d║d║d║d║d║d║d║d║d║d║dp╗d║d╨╗d║d║d║d ╝d║d║d║d║d║d║d║d║d║d║d║d║d║d║d║d║d║d║d║d║d║d║d║dp║d√┴dkфd\уd~тd~тd~тd~тd~тd~тdМсdцd~тd~тd~тdpхdчd+╨d∙юdэdюd╖╓d,ыdсъd╥ыd~тd√┴d√┴dя╩dя╩dЫшd~тdV╘d√┴d╙╙dV╙d3┘d√┴dл╪d■═d═d╙dй╥d ╥dК╤d╨╚d╚d╙╟dа─dU█d╢┌d,┌dа┘d6▀dл╧d╧dж╬dсdЙрd╓dБ╒dЖ╩d╩d╗╔d╔dяЁdбяd╪dh╫dx╠dу╦dльd√┴d√┴d√┴d√┴d√┴d√┴d√┴d√┴d√┴d√┴dФ╦d√┴d=Ёd╣чdЁэd╙╨d▌├dv├d√┴d ┬d√┴d╡┬d ╥d)┬d)┬devaluate_subexp_standardmake_paramsShow overload resolution in evaluating C++ functions.Set overload resolution in evaluating C++ functions.Overload resolution in evaluating C++ functions is %s. cannot take slice of non-arrayslice from bad array or bitstringcurrent stack frame does not contain a variable named `%s'name of destructor must equal name of classfield %s is nonexistent or has been optimized outbase class '%s' is ambiguous in type '%s'Overloaded method instance %s, # of parms %d Overloaded function instance %s # of parms %d Overload resolution champion is %d, ambiguous? %d qualified_name[next_namespace_len] == ':'array elements must all be the same sizeNo frame is currently executing in block %s.No frame is currently executing in specified blockAddress requested for identifier "%s" which is in register $%sCan't take address of "%s" which isn't an lvalue.Only values in memory can be extended with '@'.Invalid number %d of repetitions.!gdbarch_convert_register_p (get_frame_arch (frame), regnum, type){ value_fetch_lazy (frame=%d,regnum=%d(%s),...) Couldn't retrieve complete object of RTTI type %s; object may be in register(s).Could not determine the vector bounds"%s" exists in this program but is not a function.evaluation of this expression requires the target program to be activeevaluation of this expression requires the program to have a function "%s".No memory available to program now: you need to start the target firstNo memory available to program: call to malloc failedInternal error: non-aggregate type to value_struct_elt_for_referencestatic field %s has been optimized outno member function matches that type instantiationnon-unique member `%s' requires type instantiationCannot reference virtual member function "%s"non-aggregate type in value_aggregate_eltcannot resolve overloaded method `%s': no arguments suppliedAttempt to extract a component of a value that is not a %s.Cannot take address of method %s.There is no member or method named %s.One of the arguments you tried to pass to %s could not be converted to what the function wants.Structure has no component named %s.Attempt to extract a component of a value that is not a struct or unionTYPE_DOMAIN_TYPE (fns_ptr[0].type) != NULLInternal error: incompatible overload candidates proposedInternal error: unexpected overload comparison resultCannot resolve method %s%s%s to any overloaded instanceCannot resolve function %s to any overloaded instanceUsing non-standard conversion to match method %s%s%s to supplied argumentsUsing non-standard conversion to match function %s to supplied arguments(TYPE_CODE (t1) == TYPE_CODE_STRUCT || TYPE_CODE (t1) == TYPE_CODE_UNION) && !!"Precondition is that type is of STRUCT or UNION kind."(TYPE_CODE (t2) == TYPE_CODE_STRUCT || TYPE_CODE (t2) == TYPE_CODE_UNION) && !!"Precondition is that value is of STRUCT or UNION kind"TYPE_CODE (check_typedef (value_type (v2))) == TYPE_CODE_STRUCT && !!"Why did coercion fail?"array element type size does not divide object size in castcannot cast non-number to complexCannot convert between vector values of different sizescan only cast scalar to vector of same sizeLeft operand of assignment is not a modifiable lvalue.value_parent (value_parent (toval)) == NULLCan't handle bitfields which don't fit in a %d bit word.Value being assigned to is no longer active.Left operand of assignment is not an lvalue.Argument to dynamic_cast must be a pointer or reference typeArgument to dynamic_cast must be pointer to class or `void *'Argument to dynamic_cast does not have pointer typeArgument to dynamic_cast does not have pointer to class typeArgument to dynamic_cast does not have class typeCouldn't determine value's most derived type for dynamic_castoverload-resolutionslice out of rangeno `this' in current languageno frame selectedvirtual baseclass botch...Badness @ %d : %d valops.cbad array bounds (%d, %d)regname && *regnameend - memaddr <= lengthvalue_lazy (val)value_offset (val) == 0 register=%d address=%s computed bytes=Unexpected lazy value type.Unexpected value type.Not a numeric type.VALUE_LVAL (val) == not_lvalmalloc%s::%sno matching member functiontypecmp: no argument listThere is no member named %s.Couldn't find method %s%s%sAmbiguous overload resolutiontype != NULL && v2 != NULLcode1 != TYPE_CODE_REFvalue truncatedInvalid cast.Ambiguous dynamic_castdynamic_cast failedInvalid reinterpret_castП~ehБe░АepАeЁeр~efind_overload_matchfind_oload_champ_namespace_loopaddress_of_variablevalue_assignread_value_memoryvalue_fetch_lazyvalue_onevalue_castvalue_cast_structsvalue_cast_pointers dSecond argument of 'IN' has wrong typeFirst argument of 'IN' has wrong typeFirst argument of 'IN' not in rangeArgument to positive operation not a number.TYPE_CODE (type1) == TYPE_CODE_DECFLOAT || TYPE_CODE (type2) == TYPE_CODE_DECFLOATMixing decimal floating types with other floating types is not allowed.Don't know how to convert from %s to %s.unimplemented support for boolean repeatscan't repeat values of that typeStrings can only be concatenated with other strings.Booleans can only be concatenated with other bitstrings or booleans.unimplemented support for boolean concatenation.illegal operands for concatenation.TYPE_CODE (type1) == TYPE_CODE_PTRTYPE_CODE (type2) == TYPE_CODE_PTRFirst argument of `-' is a pointer and second argument is neither an integer nor a pointer of the same type.Type size unknown, assuming 1. Try casting to a known type, or void *.TYPE_CODE (ptr_type) == TYPE_CODE_PTRCannot perform pointer math on incomplete types, try casting to a known type, or void *.Cannot perform pointer math on incomplete type "%s", try casting to a known type, or void *.array or string index out of rangeArgument to complement operation not an integer, boolean.Argument to negate operation not a number.Vector operations are only supported among vectorsCannot perform operation on vectors with different typesOperation not valid for decimal floating point number.Cannot perform exponentiation: %sInteger-only operation on floating point number.Invalid operation on booleans.Attempt to raise 0 to negative power.Invalid binary operation on numbers.Argument to operation not a number or boolean.Invalid type combination in ordering comparison.Invalid type combination in equality test.TYPE_CODE (vector_type) == TYPE_CODE_ARRAY && TYPE_VECTOR (vector_type)conversion of scalar to vector involves truncationCan't do that unary op on that typeInvalid unary operation specified.Can't do that binary op on that typeInvalid binary operation specified.valarith.cCould not find %s.no such vector elementnot an array or stringDivision by zeromember function %s not foundВзe|зewзe.зeЗзe╧еeкeкeыйeЇйe═йeвйeЪйeТйeyйeiйeaйeYйeQйeAйe1йe!йeйeйeўиe╧еe╧еe╧еe╧еe╧иe╞иeЛиe╧еe╧еe╧еeЇйe1иeлe лe·кeыкe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иe1иeЫкeНкe1кe╧еeъмeтмe┘мe├мeнмeУмeИмe}мeeмeUмeKмeCмe;мe+мeмeмe√лeылe█лe╧еe╧еe╧еe╧еeзлeЮлeOлe╧еe╧еe╧еe├мeP╖e8╖e ╖e╖eв╡eш╢e╪╢e╕╢ex╢eв╡e`╢eв╡eв╡eв╡eв╡eв╡eв╡eв╡eв╡eв╡eв╡eв╡eв╡eв╡e╨╡eн╕eр╕ep╣eА╣eР╣eа╣eн╕e░╣e╚╣eр╣e°╣e║e ║e0║e@║eX║ep║eА║eР║eи║eн╕e└║eн╕e╨║eн╕eш║e╗eн╕eн╕eн╕eн╕e╗eн╕e╕╗eд╗eР╗e|╗eh╗eн╕eн╕eн╕eн╕eн╕eT╗e@╗e,╗evalue_args_as_decimalvalue_vector_widenvalue_ptrdifffind_size_for_pointer_mathGeneric command for setting how things print.Generic command for showing print settings."set print elements 0" causes there to be no limit.Show limit on string chars or array elements to print.Set limit on string chars or array elements to print.Show printing of char arrays to stop at first null char.Set printing of char arrays to stop at first null char."set print repeats 0" causes all elements to be individually printed.Show threshold for repeated print elements.Set threshold for repeated print elements.Show prettyprinting of structures.Set prettyprinting of structures.Show printing of unions interior to structures.Set printing of unions interior to structures.Show prettyprinting of arrays.Show printing of symbol names when printing pointers.Set printing of symbol names when printing pointers.Show default input radix for entering numbers.Set default input radix for entering numbers.Show default output radix for printing of values.Set default output radix for printing of values.Set default input and output number radices. Use 'set input-radix' or 'set output-radix' to independently set each. Without an argument, sets both radices back to the default value of 10.Show the default input and output number radices. Use 'show input-radix' or 'show output-radix' to independently show each.Show printing of array indexesSet printing of array indexes.Printing of array indexes is %s. Default output radix for printing of values is %s. Default input radix for entering numbers is %s. Printing of symbols when printing pointers is %s. Prettyprinting of arrays is %s. Printing of unions interior to structures is %s. Prettyprinting of structures is %s. Threshold for repeated print elements is %s. Printing of char arrays to stop at first null char is %s. Limit on string chars or array elements to print is %s. Input and output radices set to decimal %u, hex %x, octal %o. Input radix set to decimal %u, hex %x, octal %o. Output radix set to decimal %u, hex %x, octal %o. Unsupported output radix ``decimal %u''; output radix unchanged.Output radix now set to decimal %u, hex %x, octal %o. Nonsense input radix ``decimal %u''; input radix unchanged.Input radix now set to decimal %u, hex %x, octal %o. Input and output radices now set to decimal %u, hex %x, octal %o. "set print" must be followed by the name of a print subcommand. Internal error in octal conversion;failed internal consistency checkunable to get bounds of array, assuming null arrayvaladdr == value_contents_for_printing_const (val)Could not determine the array high boundUnhandled type code %d in symbol table.set print show print repeatsprettySet prettyprinting of arrays.Show printing of addresses.Set printing of addresses.input-radixarray-indexesPrinting of addresses is %s. %1dValue out of range.\x%lx

%.9g%.17g%.35Lg[ #%d

embedded_offset == 0 | unknown: tmp.num_chars < MAX_WCHARSd.num_chars < MAX_WCHARS\\a\b\f\n\r\t\v, '>...p╫e╨╓e ╫eА╓e0╓eр╒eШ╒e╪фeфeхeфeфe(хePхeфeфeфeфeфeфexхeфeфeфeфeфeШхeфe└хe╕фeўe8ўepўe╘єe╘єe(°e░°e╪°exїe@∙eh∙e╘єexїe╘єeАЇe╪°e╘єe ЇeаЇeїeЎehЎe╘єe╘єeЇecount_next_characterVEC_converted_character_d_quick_pushVEC_converted_character_d_lastVEC_converted_character_d_indexval_print_scalar_formattedgeneric_val_print<incomplete sequence Describe where symbol SYM is stored.Describe what symbol is at location ADDR. Only for symbols with fixed locations (global or static scope).Examine memory: x/FMT ADDRESS. ADDRESS is an expression for the memory address to examine. FMT is a repeat count followed by a format letter and a size letter. Format letters are o(octal), x(hex), d(decimal), u(unsigned decimal), t(binary), f(float), a(address), i(instruction), c(char) and s(string). Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes). The specified number of objects of the specified size are printed according to the format. Defaults for format and size letters are those previously used. Default count is 1. Default address is following last thing printed with this command or "print".Expressions to display when program stops, with code numbers.Cancel some expressions to be displayed when program stops. Arguments are the code numbers of the expressions to stop displaying. No argument means cancel all automatic-display expressions. "delete display" has the same effect as this command. Do "info display" to see current list of code numbers.Print value of expression EXP each time the program stops. /FMT may be used before EXP as in the "print" command. /FMT "i" or "s" or including a size-letter is allowed, as in the "x" command, and then EXP is used to get the address to examine and examining is done as in the "x" command. With no argument, display all currently requested auto-display expressions. Use "undisplay" to cancel display requests previously made.Enable some expressions to be displayed when program stops. Arguments are the code numbers of the expressions to resume displaying. No argument means enable all automatic-display expressions. Do "info display" to see current list of code numbers.Disable some expressions to be displayed when program stops. Arguments are the code numbers of the expressions to stop displaying. No argument means disable all automatic-display expressions. Do "info display" to see current list of code numbers.Cancel some expressions to be displayed when program stops. Arguments are the code numbers of the expressions to stop displaying. No argument means cancel all automatic-display expressions. Do "info display" to see current list of code numbers.printf "printf format string", arg1, arg2, arg3, ..., argn This is useful for formatted output in user-defined commands.Like "print" but don't put in value history and don't print newline. This is useful in user-defined commands.Evaluate expression EXP and assign result to variable VAR, using assignment syntax appropriate for the current language (VAR = EXP or VAR := EXP for example). VAR may be a debugger "convenience" variable (names starting with $), a register (a few standard names starting with $), or an actual variable in the program being debugged. EXP is any valid expression. Use "set variable" for variables with names identical to set subcommands. With a subcommand, this command modifies parts of the gdb environment. You can see these environment settings with the "show" command.Call a function in the program. The argument is the function name and arguments, in the notation of the current working language. The result is printed and saved in the value history, if it is not void.Evaluate expression EXP and assign result to variable VAR, using assignment syntax appropriate for the current language (VAR = EXP or VAR := EXP for example). VAR may be a debugger "convenience" variable (names starting with $), a register (a few standard names starting with $), or an actual variable in the program being debugged. EXP is any valid expression. This may usually be abbreviated to simply "set".Print value of expression EXP. Variables accessible are those of the lexical environment of the selected stack frame, plus all those whose scope is global or an entire file. $NUM gets previous value number NUM. $ and $$ are the last two values. $$NUM refers to NUM'th value back from the last one. Names starting with $ refer to registers (with the values they would have if the program were to return to the stack frame now selected, restoring all registers saved by frames farther in) or else to debugger "convenience" variables (any such name not a known register). Use assignment expressions to give values to convenience variables. {TYPE}ADREXP refers to a datum of data type TYPE, located at address ADREXP. @ is a binary operator for treating consecutive data objects anywhere in memory as an array. FOO@NUM gives an array whose first element is FOO, whose second element is stored in the space following where FOO is stored, etc. FOO must be an expression whose value resides in memory. EXP may be preceded with /FMT, where FMT is a format letter but no count or size letter (see "x" command).Similar to "print" command, but it used to print the type, size, offset, bitpos and bitsize of the expression EXP.Show the largest offset that will be printed in form.Set the largest offset that will be printed in form.Show printing of source filename and line number with .Set printing of source filename and line number with .Convert "printf format string", arg1, arg2, arg3, ..., argn to a command line, and call it.Size letters are meaningless in "%s" command.Item count other than 1 is meaningless in "%s" command.Format letter "%c" is meaningless in "%s" command.Printing of source filename and line number with is %s. The largest offset that will be printed in form is %s. format-control string and values to printWrong number of arguments for specified format-stringexpected wchar_t argument for %%lcExpression is not an assignment (and might have no effect)bad display number at or near '%s'There are no auto-display expressions now. Auto-display expressions now in effect: Num Enb Expression (cannot be evaluated in the current context)Delete all auto-display expressions? osect->objfile && osect->objfile->name%s in load address range of %s overlay section %s of %s %s in load address range of section %s of %s %s in %s overlay section %s of %s %s in load address range of %s overlay section %s %s in load address range of section %s " is a field of the local class variable in a file compiled without debuggingaddress of an argument in register %sa local variable at frame offset %lda reference argument at offset %lda thread-local variable at offset %s in the thread-local storage for `%s'objfile->pspace == solib->pspaceDisabling display %d to avoid infinite recursion. Unable to display strings with size '%c', using 'b' instead.undisplayprintminspectmax-symbolic-offsetsymbol-filenamedisplay != NULL./printcmd.c*p == 'p' && *(p + 1) == '\0'%d %d %d %d %d %d one or more display numbersNo display number %d. %d: %c /%d%c%c /%c unmapped%s + %u%s in %s overlay section %s No symbol matches %s. Argument required.Symbol "`self' `this' " is at , -- loaded at in overlay section %s" is an argument in register %sa variable in register %san argument at offset %lda typedefunresolvedof unknown (botched) type%s%s = <*+%u at %s:%d*>Unable to display "%s": %s starting display addressoptions->format != 's'Undefined output size "%c".Undefined output format "%c".0ffаfаfиfАfXf(f░f╨fHfв3fр7fР4f`7fШ7f°7f░7fP5fx5fР5f 6fр7fP6f(7f@7f=Tf&TfаOfаOfаOfаOfаOfаOfаOfаOfаOfаOfTfаOfаOfаOfаOf°Sf&TfаOfаOfсSfprintf_pointerdelete_displaysym_infoclear_dangling_display_expressionsprint_scalar_formattedblock.cgb->symtab != NULLgb->symtab == NULLBLOCKVECTOR_NBLOCKS (bl) >= 2BLOCK_SUPERBLOCK (block) == NULLiterator->which != FIRST_LOCAL_BLOCKDW_OP_GNU_entry_value resolving cannot find DW_TAG_GNU_call_site %s in %sblock_iter_match_stepget_block_symtabblock_iter_name_stepblock_iterator_stepset_block_symtabfind_block_in_blockvectorcurrent object files: enum %s { enum { }; } %s; whereisSource files in the program.sourcesSource files in the programlgmultiple-symbolsbasenames-may-differsymtab-createobj != NULLIS_ABSOLUTE_PATH (real_path)IS_ABSOLUTE_PATH (name)globaldisassemble 0x%lx 0x%lxdisassemble 0x%lx -s .data 0x%lx -s .bss 0x%lx -s .rodata 0x%lx%s%s%s: %dgdb_get_datatype [%s] (a) gdb_get_datatype [%s] (b) expr->elts[0].opcode: %d (?) File static __dt__%s%s__%s%s%dkind <= TYPES_DOMAIN`operator %s' not supportedoperator%.*s%sAll defined %ss: Non-debugging symbols: _globals_ARM C Compiler, ADSThumb C Compiler, ADSARM C++ Compiler, ADSThumb C++ Compiler, ADSARM C/C++ Compiler, RVCTget_member_data(%s.%s): switching type from %lx to %lx All global and static variable names, or those matching REGEXP.All function names, or those matching REGEXP.All type names, or those matching REGEXP.Set a breakpoint for all functions matching REGEXP.Valid values are "ask", "all", "cancel", and the default is "all".Show how the debugger handles ambiguities in expressions.Set the debugger behavior when more than one symbol are possible matches in an expression.(A "base name" is the name of a file with the directory part removed. Example: The base name of "/home/user/hello.c" is "hello.c".) If set, GDB will canonicalize file names (e.g., expand symlinks) before comparing them. Canonicalization is an expensive operation, but it allows the same file be known by more than one base name. If not set (the default), all source files are assumed to have just one base name, and gdb will do file name comparisons more efficiently.Show whether a source file may have multiple base names.Set whether a source file may have multiple base names.When enabled, debugging messages are printed when building symbol tables.Show debugging of symbol table creation.Set debugging of symbol table creation.code == TYPE_CODE_UNION || code == TYPE_CODE_STRUCT || code == TYPE_CODE_CLASS || code == TYPE_CODE_ENUMInternal: global symbol `%s' found in %s psymtab but not in symtab. %s may be an inlined function, or may be a template function (if a template, try specifying an instantiation: %s).objfile || SYMBOL_SYMTAB (sym)Internal: %s symbol `%s' found in %s psymtab but not in symtab. %s may be an inlined function, or may be a template function (if a template, try specifying an instantiation: %s).Internal error: `%s' is not an aggregateexpr->elts[0].opcode: OP_VAR_VALUE expr->elts[0].opcode: OP_TYPE Source files for which symbols have been read in: Source files for which symbols will be read in on demand: sym_text[sym_text_len] == '\0' || sym_text[sym_text_len] == '('mismatched quoting on brackets, try 'operator\[\]'nothing is allowed between '[' and ']'`operator ()' must be specified without whitespace in `()'`operator ?:' must be specified without whitespace in `?:'`operator []' must be specified without whitespace in `[]' %s; All %ss matching regular expression "%s": ARM/Thumb C/C++ Compiler, RVCTrШfrШf`Юf╕ЭfЩЭfЭf█ЬfrШf╦ЬfФЬfjЬf╠Ъf┐ЪfаЮf*ЪfЧЩf╙Шf╣ШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfrШfАШfaskallcancelHПТLПТPПТsymtab_symbol_infoFЖmв-{ТъБТ■БТВТ*ВТМТBВТрБТVEC_char_ptr_quick_pushmake_symbol_completion_typedefault_make_symbol_completion_list_break_onsearch_symbols VEC_CORE_ADDR_quick_pushlookup_symbol_global_iterator_cbfixup_symbol_sectionmatching_obj_sectionssymbol_init_cplus_specificiterate_over_symtabsiterate_over_some_symtabs!ps->anonymouspsymtab.cpsymtab != NULLPsymtabs: pst->user == NULLpsymbolspsymtabscheck-symtabs %s partial symbols: `%s'undefined domain, struct domain, label domain, , constant intpass by valuepass by referenceregister address parameterstack parameterconstant bytescomputed at runtimeReading symbols from %s...done. center < toptop == bottomStatic symbol `' only found in psymtab Global symbol `Psymtab covers bad range covers but symtab covers only { objfile %s ((struct objfile *) %s) { psymtab %s readin %s (null) fullname %s text addresses globals statics dependencies (object Read from object file %s ( Full symtab was read (at by function at Relocate symbols by %d GlobalPrint dump of current partial symbol definitions. Entries in the partial symbol table are dumped to file OUTFILE. If a SOURCE file is specified, dump only that file's partial symbols.List the partial symbol tables for all object files. This does not include information about individual partial symbols, just the symbol table structures themselves.Check consistency of psymtabs and symtabs.Creating one or more psymtabs for objfile %s ... Created psymtab %s for module %s. (no debugging symbols found)...(Internal error: pc %s in read in psymtab, but not in symtab.) Number of psym tables (not yet expanded): %d select_source_symtab: readin pst found and no symtabs.((struct partial_symtab *) %s) psymtabs_addrmap_supported %s (* (struct partial_symbol **) %s @ %d) psymtab %s ((struct partial_symtab *) %s) print-psymbols takes an output file name and optional symbol file name Anonymous partial symtab (%s) Partial symtab for source file %s Symbols cover text addresses Address map supported - %s. Depends on %d other partial symtabs. Shared partial symtab with user ьfьfшыf╨ыf╕ыfаыfИыfpыfXыf@ыf(ыfыf°ъfръf0ьf└█fg└gр fp■f ■fpчfр№fP№f№fp√f√fРЎfАїf@єfаЄfpsymtab_to_fullnamefind_pc_sect_psymbolfixup_psymbol_sectionmatch_partial_symbolpartial_map_symtabs_matching_filenamepartial_map_expand_applyLoad symbol table from executable file FILE. The `file' command can also load symbol tables, as well as setting the file to execute.Load symbols from FILE, assuming FILE has been dynamically loaded. Usage: add-symbol-file FILE ADDR [-s -s ...] ADDR is the starting address of the file's text. The optional arguments are section-name section-address pairs and should be specified if the data and bss segments are not contiguous with the text. SECT is a section name to be loaded at SECT_ADDR.Dynamically load FILE into the running program, and record its symbols for access from GDB. A load OFFSET may also be given.Commands for debugging overlays.Assert that an overlay section is mapped.Assert that an overlay section is unmapped.List mappings of overlay sections.Enable automatic overlay debugging.Read the overlay mapping state from the target.Usage: set extension-language .foo barShow mapping between filename extension and source language.Set mapping between filename extension and source language.All filename extensions associated with a source language.Separate debug symbols are first searched for in the same directory as the binary, then in the `.debug' subdirectory, and lastly at the path of the directory of the binary with each global debug-file-directory component prepended.Show the directories where separate debug symbols are searched for.Set the directories where separate debug symbols are searched for.The directory where separate debug symbols are searched for is "%s". Mapping between filename extension and source language is "%s". Filename extensions and the languages they represent:I'm sorry, Dave, I can't do that. Symbol format `%s' unknown.Overlay debugging not enabled. Use either the 'overlay auto' or the 'overlay manual' command.Argument required: name of an overlay section'%s': Filename extension must begin with '.''%s': two arguments required -- filename extension and languageThis target does not know how to read its overlay state.Automatic overlay debugging enabled.Note: section %s unmapped by overlap "overlay" must be followed by the name of an overlay command. 0 <= which && which <= data->num_segmentsError reading inferior's overlay table: couldn't find `_ovly_table' array in inferior. Use `overlay manual' mode.Error reading inferior's overlay table: couldn't find `_novlys' variable in inferior. Use `overlay manual' mode.Creating one or more symtabs for objfile %s ... Created symtab %s for module %s. Loading section %s, size %s lma %s `%s': can't open to read symbols: %s.Problem reading "%s" for CRC: %sthe debug information found in "%s" does not match "%s" (CRC mismatch). Discard symbol table from `%s'? no loadable sections found in added symbol-file %saddrs_to_abfd_addrs[index_in_addrs] == NULL"%s" is not an object file: %sLoad new symbol table from "%s"? `%s' has disappeared; keeping its symbols. `%s' has changed; re-reading symbols. Can't open %s to read symbols.Can't read symbols from %s: %s.add-symbol-file takes a file name and an addressUSAGE: add-symbol-file [-readnow] [-s ]*The address where %s has been loaded is missingadd symbol table from file "%s" at no symbol file name was specifiedadd-symbol-fileoverlay ovlyunmap-overlaylist-overlaysEnable overlay debugging.manualDisable overlay debugging.load-target.d.C.cc.cp.cpp.cxx.c++.java.class.m.f.F.for.FOR.ftn.FTN.fpp.FPP.f90.F90.f95.F95.f03.F03.f08.F08.s.sx.pas.pp.adb.ads.a.ada.dgextension-languagedebug-file-directory %s - %s Section %s is not mappedNo overlay section called %s.dynbss.sdynbss.sbssOverlay debugging disabled.Overlay debugging enabled.Section %s, loaded at , mapped at No sections are mapped. num_segment_bases > 0symfile.cdata->num_segments > 0objfile->sf->sym_relocate_ovly_table_novlysTransfer rate: transfer-rate bits/sec bytes/sec KB/sectransferred-bits bits in <1 secwrite-rate bytes/writeCanceled the download`%s': can't read symbols: %s.Discard symbol table? symfile_objfile == NULLNo symbol file now. __k.gnu.liblist.gnu.conflictsection %s not found in %sfile to loadInvalid download offset:%s.Too many parameters.Load failedStart address , load size load-sizeexpanding to full symbols...! (addrs && offsets)(no debugging symbols found) \"' %s_addr = %s symfile_map_offsets_to_segmentssymfile_relocate_debug_sectionVEC_objfilep_quick_pushVEC_memory_write_request_s_quick_pushVEC_sym_fns_ptr_quick_pushsymbol_file_clearsyms_from_objfile_1addr_info_make_relativePrint dump of current symbol definitions. Entries in the full symbol table are dumped to file OUTFILE. If a SOURCE file is specified, dump only that file's symbols.Print dump of current minimal symbol definitions. Entries in the minimal symbol table are dumped to file OUTFILE. If a SOURCE file is specified, dump only that file's minimal symbols.Print dump of current object file definitions.List the full symbol tables for all object files. This does not include information about individual symbols, blocks, or linetables --- just the symbol table structures themselves. With an argument REGEXP, list the symbol tables whose names that match that. blockvector ((struct blockvector *) %s)%s linetable ((struct linetable *) %s) print-msymbols takes an output file name and optional symbol file nameinternal error: minimal symbol count %d != %d Blockvector same as previous symtab Arguments missing: an output file name and an optional symbol file name Number of "stab" symbols read: %d Number of "minimal" symbols read: %d Number of "partial" symbols read: %d Number of "full" symbols read: %d Number of "types" defined: %d Number of symbol tables: %d Number of symbol tables with line tables: %d Number of symbol tables with blockvectors: %d Space used by a.out string tables: %d Total memory used for objfile obstack: %d Total memory used for BFD obstack: %d Total memory used for psymbol cache: %d Total memory used for macro cache: %d Total memory used for file name cache: %d Byte cache statistics for '%s': msymbolsobjfiles { symtab %s ((struct symtab *) %s) dirname %s fullname %s (primary) debugformat %s } Object file %s: Objfile at , bfd at , %d minsyms Symtabs: NOT ON CHAIN! Object file %s: No minimal symbols found. [%2d] %c Symtab for file %s Language: %s Line table: line %d at Blockvector: block #%03d, object at under , %d syms/buckets in , function %sError printing symbol: label %s at %s %s = ; const %s (%s)const %u hex bytes:static at arg at offset %sreference arg at %saddress parameter register %slocal at offset %slabel at block object botched symbol class %xStatistics for '%s': partial symbol cachepreprocessor macro cachefile name cachestg vgPvgаvg╨vgЁvgwg0wgИtgPwgpwg╨wg0xgHxg`xguTi?DBAStdb"'unmatched quoteelt != NULLlinespec.cself->list_modeNo source file named %s.Function "%s" not defined.Empty line specification.self->canonical != NULLresult->nelts >= 1canonical->suffix != NULL[0] cancel [1] all PS2overload-choiceone or more choice numberscanceledNo choice number %d. keywordcoloncommaend of input№ЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgлЙgтЙgлЙgлЙgлЙgлЙgтЙgлЙgлЙgлЙgCКg#КgCКgлЙgлЙgCКgCКgCКgCКgCКgCКgCКgCКgCКgCКgКgparse_linespecД╤Ч=}Пq7Жadd_matching_symbols_to_infoVEC_minsym_and_objfile_d_indexVEC_minsym_and_objfile_d_quick_pushVEC_symbolp_quick_push2╣Т:╣Тп#С= Р@╣ТF╣ТVEC_symtab_p_quick_pushlookup_prefix_symfind_methodVEC_const_char_ptr_quick_pushVEC_typep_quick_pushVEC_symbolp_indexVEC_symtab_p_popdecode_digits_list_modedecode_digits_ordinarycanonicalize_linespecdecode_line_fullVEC_linespec_sals_quick_pushdecode_line_2malformed linespec error: unexpected %s, "%s"malformed linespec error: unexpected %sNo line %d in the current file.ls->labels.function_symbols != NULL && (VEC_length (symbolp, ls->labels.function_symbols) == 1)!SYMTAB_PSPACE (elt)->executing_startup!SYMTAB_PSPACE (SYMBOL_SYMTAB (sym))->executing_startupsee caller, this text doesn't mattercannot evaluate expressions while program space is in startupPARSER_STREAM (parser) != NULLHistory values used in line specs must have integer values.Convenience variables used in line specs must have integer values.No label "%s" defined in function "%s".Undefined convenience variable or function "%s" not defined in "%s".Undefined convenience variable or function "%s" not defined.Function "%s" not defined in "%s".Junk at end of line specification: %sfilter == NULL || select_mode == multiple_symbols_allselect_mode == NULL || select_mode == multiple_symbols_all || select_mode == multiple_symbols_ask || select_mode == multiple_symbols_cancel(flags & DECODE_LINE_LIST_MODE) == 0result.nelts == 1 || canonical->pre_expandedcanonical->addr_string != NULLstate->canonical_names[i].suffix != NULLcanceled because the command is ambiguous See set/show multiple-symbol.duplicate request for %d ignored. dict_add_symbol: non-expandable dictionarydictionary.c_ada_TKBР┘g ┘gА╫gа╫gа╪g╪g└╫gР╓gа█gА╫gа╫gа╪g╪g└╫g░┘gР▐gа╓gЁ╓g└▌g└╪gp╫gР╓gа█gа╓gЁ╓g└▌g└╪g`╫gVariables of type float should generally be converted to doubles before calling an unprototyped function, and left alone when calling a prototyped function. However, some older debug info formats do not provide enough information to determine that a function is prototyped. If this flag is set, GDB will perform the conversion for a function it considers unprototyped. The default is to perform the conversion. Show coercion of floats to doubles when calling functionsSet coercion of floats to doubles when calling functions.The unwindonsignal lets the user determine what gdb should do if a signal is received while in a function called from gdb (call dummy). If set, gdb unwinds the stack and restore the context to what as it was before the call. The default is to stop in the frame where the signal was received.Show unwinding of stack if a signal is received while in a call dummy.Set unwinding of stack if a signal is received while in a call dummy.The unwind on terminating exception flag lets the user determine what gdb should do if a std::terminate() call is made from the default exception handler. If set, gdb unwinds the stack and restores the context to what it was before the call. If unset, gdb allows the std::terminate call to proceed. The default is to unwind the frame.Show unwinding of stack if std::terminate() is called while in a call dummy.Set unwinding of stack if std::terminate is called while in call dummy.unwind-on-terminating-exceptionUnwind stack if a C++ exception is unhandled while in a call dummy is %s. Unwinding of stack if a signal is received while in a call dummy is %s. Coercion of floats to doubles when calling functions is %s. Invalid data type for function to be called.May not call functions while looking at trace frames.Cannot call functions in reverse mode.This target does not support function calls.sp == gdbarch_frame_align (gdbarch, sp)gdbarch_push_dummy_code_p (gdbarch)Too few arguments in function call.bpt->related_breakpoint == bpt%s An error occurred while in a function called from GDB. Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop.The program being debugged exited while in a function called from GDB. Evaluation of the expression containing the function (%s) will be abandoned.The program received a signal in another thread while making a function call from GDB. Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop.The program stopped in another thread while making a function call from GDB. Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop.The program being debugged was signaled while in a function called from GDB. GDB has restored the context to what it was before the call. To change this behavior use "set unwindonsignal off". Evaluation of the expression containing the function (%s) will be abandoned.The program being debugged was signaled while in a function called from GDB. GDB remains in the frame where the signal was received. To change this behavior use "set unwindonsignal on". Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop.The program being debugged entered a std::terminate call, most likely caused by an unhandled C++ exception. GDB blocked this call in order to prevent the program from being terminated, and has restored the context to its original state before the call. To change this behaviour use "set unwind-on-terminating-exception off". Evaluation of the expression containing the function (%s) will be abandoned.The program being debugged stopped while in a function called from GDB. Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop.coerce-float-to-doubleunwindonsignalat 0x%sstrlen (tmp) + 1 <= buf_sizeinfcall.c... should not be hereretvalhьghьgаэghьghьg@ьghьgрэg@ьgPэghьghьghьghьghьghьghьghьg эg@ьg@ьgcall_function_by_handpush_dummy_codeget_function_nameUsage: set inferior-tty /dev/pts/1Show terminal for future runs of program being debugged.Set terminal for future runs of program being debugged.Follow this command with any number of args, to be passed to the program.Show argument list to give program being debugged when it is started.Set argument list to give program being debugged when it is started.The environment to give the program, or one variable's value. With an argument VAR, prints the value of environment variable VAR to give the program being debugged. With no arguments, prints the entire environment to be given to the program.Complement to certain "set" commands.Cancel environment variable VAR for the program. This does not affect the program until the next "run" command.Set environment variable value to give the program. Arguments are VAR VALUE where VAR is variable name and VALUE is value. VALUES of environment variables are uninterpreted strings. This does not affect the program until the next "run" command.Add directory DIR(s) to beginning of search path for object files. $cwd in the path means the current working directory. This path is equivalent to the $PATH shell variable. It is a list of directories, separated by colons. These directories are searched to find fully linked executable files and separately compiled object files as needed.Current search path for finding object files. $cwd in the path means the current working directory. This path is equivalent to the $PATH shell variable. It is a list of directories, separated by colons. These directories are searched to find fully linked executable files and separately compiled object files as needed.Kill execution of program being debugged.Attach to a process or file outside of GDB. This command attaches to another target, of the same type as your last "target" command ("info files" will show your target stack). The command may take as argument a process id or a device file. For a process id, you must have permission to send the process a signal, and it must have the same effective uid as the debugger. When using "attach" with a process id, the debugger finds the program running in the process, looking first in the current working directory, or (if not found there) using the source file search path (see the "directory" command). You can also use the "file" command to specify the program, and to load its symbol table.Detach a process or file previously attached. If a process, it is no longer traced, and it continues its execution. If you were debugging a file, the file is closed and gdb no longer accesses it.Disconnect from a target. The target will wait for another debugger to connect. Not available for all targets.Continue program with the specified signal. Usage: signal SIGNAL The SIGNAL argument is processed the same as the handle command. An argument of "0" means continue the program without sending it a signal. This is useful in cases where the program stopped because of a signal, and you want to resume the program while discarding the signal.Step one instruction exactly. Usage: stepi [N] Argument N means step N times (or till program stops for another reason).Step one instruction, but proceed through subroutine calls. Usage: nexti [N] Argument N means step N times (or till program stops for another reason).Execute until selected stack frame returns. Usage: finish Upon return, the value returned is printed and put in the value history.Step program, proceeding through subroutine calls. Usage: next [N] Unlike "step", if the current source line calls a subroutine, this command does not enter the subroutine, but instead steps over the call, in effect treating it as a single source line.Step program until it reaches a different source line. Usage: step [N] Argument N means step N times (or till program stops for another reason).Execute until the program reaches a source line greater than the current or a specified location (same args as break command) within the current frame.Continue the program up to the given location (same form as args for break command). Execution will also stop upon exit from the current stack frame.Continue program being debugged at specified line or address. Usage: jump Give as argument either LINENUM or *ADDR, where ADDR is an expression for an address to start at.Usage: go Continue program being debugged, stopping at specified line or address. Give as argument either LINENUM or *ADDR, where ADDR is an expression for an address to start at. This command is a combination of tbreak and jump.Continue program being debugged, after signal or breakpoint. Usage: continue [N] If proceeding from breakpoint, a number N may be used as an argument, which means to set the ignore count of that breakpoint to N - 1 (so that the breakpoint won't break until the Nth time it is reached). If non-stop mode is enabled, continue only the current thread, otherwise all the threads in the program are continued. To continue all stopped threads in non-stop mode, use the -a option. Specifying -a and an ignore count simultaneously is an error.Start debugged program. You may specify arguments to give it. Args may include "*", or "[...]"; they are expanded using "sh". Input and output redirection with ">", "<", or ">>" are also allowed. With no arguments, uses arguments last specified (with "run" or "set args"). To cancel previous arguments and run with no arguments, use "set args" without arguments.Start debugged program with no arguments.Run the debugged program until the beginning of the main procedure. You may specify arguments to give to your program, just as with the "run" command.Interrupt the execution of the debugged program. If non-stop mode is enabled, interrupt only the current thread, otherwise all the threads in the program are stopped. To interrupt all running threads in non-stop mode, use the -a option.List of integer registers and their contents, for selected stack frame. Register name as argument means describe only that register.List of all registers and their contents, for selected stack frame. Register name as argument means describe only that register.Execution status of the program.Print the status of the floating point unit Print the status of the vector unit Show /proc process information about any running process. Specify any process id, or use the program being debugged by default.List of mapped memory regions.List process info from /proc/PID/stat.List process info from /proc/PID/status.List current working directory of the process.List command line arguments of the process.List absolute filename for executable of the process.List all available /proc info.The program has no registers now.No floating-point info available for this processor. Cannot execute this command without a live selected thread.Cannot execute this command while the selected thread is running.The program being debugged is not being run. It stopped after being stepped. It stopped at a breakpoint that has since been deleted. It stopped with signal %s, %s. Type "info stack" or "info registers" for more information. Terminal for future runs of program being debugged is "%s". Cannot execute this command while looking at trace frames.Asynchronous execution not supported on this target.No source file has been specified.Line %d is not in `%s'. Jump anyway? WARNING!!! Destination is in unmapped overlay! Jump anyway? Execution is not within a known function.Cannot find bounds of current functionSingle stepping until exit from function %s, which has no line number information. The "finish" command does not take any arguments."finish" not meaningful in the outermost frame.Finish: couldn't find function.Kill the program being debugged? Executable and object file path: environment variable and valueSetting environment variable "%s" to null value. Delete all environment variables? "unset" must be followed by the name of an unset subcommand. -a is meaningless in all-stop mode.`-a' is meaningless in all-stop mode.Can't resume all threads and specify proceed count simultaneously.Not stopped at any breakpoint; argument ignored. TYPE_CODE (value_type) != TYPE_CODE_VOIDfinish_command: function has no target typeplatform-specific solib_create_inferior_hook did not load initial shared libraries.A program is being debugged already. Kill it? Cannot attach to this target in non-stop modeThe program being debugged has been started already. Start it from the beginning? The target does not support running in non-stop mode.No symbol table loaded. Use the "file" command.set inferior-ttyinfcmd.cenvironmentunset unsetpathskill detach finadvancegocontall-registersinfo proc Not supported on this target.No vector information Invalid selected thread.Selected thread is running.Program stopped at %s. It stopped at breakpoint %d. starting addressUnreasonable jump requestContinuing at Usage: go a locationNo selected frame.Run till exit from Run back to call of signal numberContinuing with no signal. Continuing with signal %s. In %s, Environment variable "" not defined. environment variable to setContinuing. *value not available* (raw 0xMissing register nameInvalid register `%.*s'Value returned is $%dgdb-result-varreturn-valueValue returned has type: return-type Cannot determine contents Not killed."!#$&*()\|[]{}<>?'`~^; Program not restarted.Starting programexecfileinfargs_initialize_infcmdPATHget_return_valueWhat debugger does when program gets various signals. Specify a signal as argument to print info on that signal only.Specify how to handle signals. Usage: handle SIGNAL [ACTIONS] Args are signals and actions to apply to those signals. If no actions are specified, the current settings for the specified signals will be displayed instead. Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals from 1-15 are allowed for compatibility with old versions of GDB. Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5). The special arg "all" is recognized to mean all signals except those used by the debugger, typically SIGTRAP and SIGINT. Recognized actions include "stop", "nostop", "print", "noprint", "pass", "nopass", "ignore", or "noignore". Stop means reenter debugger if this signal happens (implies print). Print means print a message if this signal happens. Pass means let program see this signal; otherwise program doesn't know. Ignore is a synonym for nopass and noignore is a synonym for pass. Pass and Stop may be combined. Multiple signals may be specified. Signal numbers and signal names may be interspersed with actions, with the actions being performed for all signals cumulatively specified.Specify how to handle a signal. Args are signals and actions to apply to those signals. Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals from 1-15 are allowed for compatibility with old versions of GDB. Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5). The special arg "all" is recognized to mean all signals except those used by the debugger, typically SIGTRAP and SIGINT. Recognized actions include "s" (toggles between stop and nostop), "r" (toggles between print and noprint), "i" (toggles between pass and nopass), "Q" (noprint) Stop means reenter debugger if this signal happens (implies print). Print means print a message if this signal happens. Pass means let program see this signal; otherwise program doesn't know. Ignore is a synonym for nopass and noignore is a synonym for pass. Pass and Stop may be combined.There is no `stop' command, but you can set a hook on `stop'. This allows you to set a list of commands to be run each time execution of the program stops.When non-zero, inferior specific debugging is enabled.When non-zero, displaced stepping specific debugging is enabled.Show displaced stepping debugging.Set displaced stepping debugging.When debugging a multi-threaded program and this setting is off (the default, also called all-stop mode), when one thread stops (for a breakpoint, watchpoint, exception, or similar events), GDB stops all other threads in the program while you interact with the thread of interest. When you continue or step a thread, you can allow the other threads to run, or have them remain stopped, but while you inspect any thread's state, all threads stop. In non-stop mode, when one thread stops, other threads can continue to run freely. You'll be able to step each thread independently, leave it stopped or free to run as needed.Show whether gdb controls the inferior in non-stop mode.Set whether gdb controls the inferior in non-stop mode.If nonzero, gdb will give control to the user when the dynamic linker notifies gdb of shared library events. The most common event of interest to the user would be loading/unloading of a new library.Show stopping for shared library events.Set stopping for shared library events.A fork or vfork creates a new process. follow-fork-mode can be: parent - the original process is debugged after a fork child - the new process is debugged after a fork The unfollowed process will continue to run. By default, the debugger will follow the parent process.Show debugger response to a program call of fork or vfork.Set debugger response to a program call of fork or vfork.An exec call replaces the program image of a process. follow-exec-mode can be: new - the debugger creates a new inferior and rebinds the process to this new inferior. The program the process was running before the exec call can be restarted afterwards by restarting the original inferior. same - the debugger keeps the process bound to the same inferior. The new executable image replaces the previous executable loaded in the inferior. Restarting the inferior after the exec call restarts the executable the process was running after the exec call. By default, the debugger will use the same inferior.Show debugger response to a program call of exec.Set debugger response to a program call of exec.off == no locking (threads may preempt at any time) on == full locking (no thread except the current thread may run) step == scheduler locked during every single-step operation. In this mode, no other thread may run during a step command. Other threads may run while stepping over a function call ('next').Show mode for locking scheduler during execution.Set mode for locking scheduler during execution.When on, execution commands (such as 'continue' or 'next') resume all threads of all processes. When off (which is the default), execution commands only resume the threads of the current process. The set of threads that are resumed is further refined by the scheduler-locking mode (see help set scheduler-locking).Show mode for resuming threads of all processes.Set mode for resuming threads of all processes.When set, doing a step over a function without debug line information will stop at the first instruction of that function. Otherwise, the function is skipped and the step command stops at a different source line.Show mode of the step operation.Set mode of the step operation.If on, gdb will use displaced stepping to step over breakpoints if it is supported by the target architecture. If off, gdb will not use displaced stepping to step over breakpoints, even if such is supported by the target architecture. If auto (which is the default), gdb will use displaced stepping if the target architecture supports it and non-stop mode is active, but will not use it in all-stop mode (see help set non-stop).Show debugger's willingness to use displaced stepping.Set debugger's willingness to use displaced stepping.Tells gdb whether to execute forward or backward.Show direction of execution (forward/reverse).Set direction of execution. Options are 'forward' or 'reverse'.Tells gdb whether to detach the child of a fork.Show whether gdb will detach the child of a fork.Set whether gdb will detach the child of a fork.When this mode is on (which is the default), randomization of the virtual address space is disabled. Standalone programs run with the randomization enabled by default on some platforms.Show disabling of debuggee's virtual address space randomization.Set disabling of debuggee's virtual address space randomization.In observer mode, GDB can get data from the inferior, but not affect its execution. Registers and memory may not be changed, breakpoints may not be set, and the program cannot be interrupted or signalled.Show whether gdb controls the inferior in observer mode.Set whether gdb controls the inferior in observer mode.Target '%s' cannot support this command.Only signals 1-15 are valid as numeric signals. Use "info signals" for a list of symbolic signals.The current thread has terminatedDebugger's willingness to use displaced stepping to step over breakpoints is %s (currently %s). Debugger's willingness to use displaced stepping to step over breakpoints is %s. Mode of the step operation is %s. Resuming the execution of threads of all processes is %s. Mode for locking scheduler during execution is "%s". Debugger response to a program call of fork or vfork is "%s". Stopping for shared library events is %s. Controlling the inferior in non-stop mode is %s. Displace stepping debugging is %s. Cannot change this setting while the inferior is running.Signal Stop Print Pass to program Description bogus execution_direction value: %dinfrun: Switching context from %s infrun: clear_proceed_status_thread (%s) %s is executing new program: %s current_program_space == inf->pspaceDetaching vfork parent process %d after child exec. Detaching vfork parent process %d after child exit. infrun: resuming vfork parent process %d inferior_thread ()->control.step_resume_breakpoint == NULLsr_type == bp_step_resume || sr_type == bp_hp_step_resumeinfrun: inserting step-resume breakpoint at %s infrun: exception resume at %lx infrun: exception resume at %s frame_id_p (frame_unwind_caller_id (next_frame))Disabling randomization of debuggee's virtual address space is unsupported on this platform.Disabling randomization of debuggee's virtual address space is %s. Disabling randomization of debuggee's virtual address space is unsupported on this platform. Target does not support this operation.Unrecognized or ambiguous flag word: "%s".%s is used by the debugger. Are you sure you want to change it? Invalid signal handling flag. Use the "handle" command to change these tables. Unable to restore previously selected frame: Unable to restore previously selected frame.sync_execution || !target_can_async_p ()No unwaited-for children left. Cannot remove breakpoints because program is no longer writable. Further execution is probably impossible. Error while running hook_stop: get_frame_type (frame) == DUMMY_FRAMEgdbarch_displaced_step_copy_insn_p (gdbarch)displaced: defering step of %s Error accessing memory address %s (%s) for displaced-stepping scratch space.displaced: displaced pc to %s displaced: stepping queued %s now displaced: breakpoint is gone: %s, step(%d) infrun: resume (step=%d, signal=%d), trap_expected=%d, current thread [%s] at %s The program is stopped at a permanent breakpoint, but GDB does not know how to step past a permanent breakpoint on this architecture. Try using a command like `return' or `jump' to continue execution.!(singlestep_breakpoints_inserted_p && step)infrun: syscall number = '%d' Not resuming: switched threads before following fork child. Unexpected pending_follow.kind %d infrun: TARGET_WAITKIND_IGNORE infrun: TARGET_WAITKIND_NO_RESUMED (ignoring) infrun: TARGET_WAITKIND_NO_RESUMED infrun: Treating signal as SIGTRAP infrun: infwait_thread_hop_state infrun: infwait_step_watch_state infrun: infwait_nonstep_watch_state infrun: TARGET_WAITKIND_LOADED infrun: TARGET_WAITKIND_SPURIOUS infrun: TARGET_WAITKIND_EXITED infrun: TARGET_WAITKIND_SIGNALLED Program terminated with signal The program no longer exists. infrun: TARGET_WAITKIND_FORKED infrun: TARGET_WAITKIND_VFORKED displaced: write child pc from %s to %s infrun: TARGET_WAITKIND_VFORK_DONE infrun: TARGET_WAITKIND_EXECD infrun: TARGET_WAITKIND_SYSCALL_ENTRY infrun: TARGET_WAITKIND_SYSCALL_RETURN infrun: TARGET_WAITKIND_STOPPED infrun: TARGET_WAITKIND_NO_HISTORY No more reverse-execution history. infrun: stopped by watchpoint infrun: stopped data address = %s infrun: (no data address available) singlestep_breakpoints_inserted_pptid_equal (singlestep_ptid, ecs->ptid)!ptid_equal (singlestep_ptid, saved_singlestep_ptid)infrun: stepping_past_singlestep_breakpoint infrun: handling deferred step ptid_equal (inferior_ptid, singlestep_ptid)infrun: software single step trap for %s infrun: unexpected thread, but expected thread advanced also Cannot step over breakpoint hit in wrong threadinfrun: no user watchpoint explains watchpoint SIGTRAP, ignoring infrun: signal arrived while stepping over breakpoint infrun: signal may take us out of single-step range infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME (!gdbarch_get_longjmp_target) inferior_thread ()->control.exception_resume_breakpoint == NULLinfrun: inserting longjmp-resume breakpoint at %s infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME ecs->event_thread->control.exception_resume_breakpoint != NULLinfrun: BPSTAT_WHAT_STEP_RESUME infrun: BPSTAT_WHAT_STOP_NOISY infrun: BPSTAT_WHAT_STOP_SILENT infrun: BPSTAT_WHAT_HP_STEP_RESUME infrun: not switching back to stepped thread, it has vanished infrun: switching back to stepped thread infrun: step-resume breakpoint is inserted infrun: no stepping, continue infrun: stepping inside range [%s-%s] infrun: stepped into dynsym resolve code infrun: stepped into signal trampoline infrun: stepped into solib return tramp infrun: stepped into subroutine infrun: stepped into undebuggable function infrun: stepped into inlined function infrun: stepping through inlined function infrun: stepped to a different line infrun: proceed (addr=%s, signal=%d, step=%d) infrun: prepare_to_proceed (step=%d), switched to [%s] infrun: resuming vfork parent thread %s displaced-stepping in-process while detachingProgram exited while detachinglzShow inferior debugging.Set inferior debugging.infrundisplacednon-stopstop-on-solib-eventsfollow-fork-modefollow-exec-modescheduler-lockingschedule-multiplestep-modedisplaced-steppingexec-directiondetach-on-fork_siginfoNo thread selected.Unable to write siginfoUnable to read siginfoObserver mode is %s. Follow exec mode is "%s". Inferior debugging is %s. Observer mode is now %s. Forward. Reverse. infrun.cpid != 0infrun: prepare_to_wait infrun: stop_stepping %s displaced: restored %s %s return_frame != NULLsignal to handlenostopnoignorenoprintnopassNot confirmed, unchanged. xdb commandUnknown value.infrun: target_wait (%d, status) = infrun: %d [%s], infrun: %s displaced: stepping %s now displaced: saved %s: displaced: run %s: infrun: resume : clear step infrun: infwait_normal_state _exitcode[Inferior ) exited with code 0%oexit-code) exited normally] signal-namesignal-meaninginfrun: stop_pc = %s !non_stopinfrun: unexpected thread infrun: thread_hop_needed infrun: context switch infrun: step through delay infrun: stopped infrun: quietly stopped infrun: random signal %d [thread-name] #%d stopped Program received signal infrun: BPSTAT_WHAT_SINGLE infrun: stepi/nexti infrun: no line number info infrun: keep going completed. infrun: wait_for_inferior () ┴╣h╢┬h┴╣hН┬h2┐h2┐h╥╜h5╜hн╗h╔├h┌┬h╛░hb├hЬ─h╞hЧ╟h1╞hЪ┼hr┼h<┼hю─hX7Уу9У^7Уъ9Уb7Уf7Уi7Уn7Уv7У`UhchildnewoffonstepforwardreverseXhpWhremove_displaced_stepping_statehandle_inferior_eventhandle_vfork_child_exec_or_exitfollow_execdisplaced_step_prepareinsert_hp_step_resume_breakpoint_at_frameinsert_step_resume_breakpoint_at_sal_1insert_longjmp_resume_breakpointinsert_step_resume_breakpoint_at_callerx╗СQTПъ2У;╞Ч√2Ус2Уш2Уё2У∙2Уnormal_stopresumeparentsame %5d %-20s Dump of expression @ Type @), value %ld (0x%lx)), value %gBlock @, symbol @Entry value of symbol @History element %ldRegister $%sInternal var @Number of args: %dBounds [%d:%d]TLS type @ (__thread /* "%s" */ Typeof (Element name: `%.*s'Field name: `%.*s'%s TypeInstance: Unknown format, %s:String ValueHex ValueOpcodeIndex %5s %20s %16s %s %20s BINOP_ADDOP_NULLBINOP_SUBBINOP_MULBINOP_DIVBINOP_REMBINOP_MODBINOP_LSHBINOP_RSHBINOP_LOGICAL_ANDBINOP_LOGICAL_ORBINOP_BITWISE_ANDBINOP_BITWISE_IORBINOP_BITWISE_XORBINOP_EQUALBINOP_NOTEQUALBINOP_LESSBINOP_GTRBINOP_LEQBINOP_GEQBINOP_REPEATBINOP_ASSIGNBINOP_COMMABINOP_SUBSCRIPTBINOP_EXPBINOP_MINBINOP_MAXSTRUCTOP_MEMBERSTRUCTOP_MPTRTYPE_INSTANCEBINOP_INTDIVBINOP_ASSIGN_MODIFYBINOP_VALBINOP_CONCATBINOP_INBINOP_RANGEBINOP_ENDTERNOP_CONDTERNOP_SLICEMULTI_SUBSCRIPTOP_LONGOP_DOUBLEOP_VAR_VALUEOP_VAR_ENTRY_VALUEOP_LASTOP_REGISTEROP_INTERNALVAROP_FUNCALLOP_OBJC_MSGCALLOP_F77_UNDETERMINED_ARGLISTOP_COMPLEXOP_STRINGOP_ARRAYUNOP_CASTUNOP_CAST_TYPEUNOP_DYNAMIC_CASTUNOP_REINTERPRET_CASTUNOP_MEMVALUNOP_MEMVAL_TLSUNOP_MEMVAL_TYPEUNOP_NEGUNOP_LOGICAL_NOTUNOP_COMPLEMENTUNOP_INDUNOP_ADDRUNOP_PREINCREMENTUNOP_POSTINCREMENTUNOP_PREDECREMENTUNOP_POSTDECREMENTUNOP_SIZEOFUNOP_PLUSUNOP_CAPUNOP_CHRUNOP_ORDUNOP_ABSUNOP_FLOATUNOP_HIGHUNOP_MAXUNOP_MINUNOP_ODDUNOP_TRUNCOP_BOOLOP_M2_STRINGSTRUCTOP_STRUCTSTRUCTOP_PTROP_THISOP_OBJC_SELECTOROP_SCOPEOP_TYPEOP_NAMEOP_OBJC_NSSTRINGOP_F90_RANGEOP_DECFLOATOP_ADL_FUNCOP_TYPEOFOP_DECLTYPE%s@entry@"bad selectornextSexpprint.c ? > (Invalid expressionVAL(TypesInstance( %s= , after conversion to prefix form: Expression: `' Language %s, %d elements, %ld bytes each. Language %s, %d elements, %ld bytes each. xi3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3i3iрi3i3i3i3i3i3i3i(i(ixiРi0 iPi░ i░ipi i└ixixixixi8i@i╚i╚i╚i@iаi╚iўiўiўiўiўiўiўiўiўiўiўiўiўiўiўiўiўiўiўiўiўixixiрiрixixi0i╨ixixixixixiiipifi\iRiHi>i4i*i iiii°iюiфi┌i╨i╞i╝i▓iиiЮiФiКiАivilibiXiNiDi:i0i&iiii■ iЇ iъ iр i╓ i╠ i┬ i╕ iо iд iЪ iР iЖ i| ir ih i^ iT iJ i@ i6 i, i" i i i i·iЁiцi▄i╥i╚i╛i┤iкiаiЦiМiВixinidiZiSiLiEi>i7i0i)i"iii ii i°iёiziEi°i°i°i*iяiIi°iНiьi°i°i°i°iyi'i╟iqiцiZiOi i/iОii@i°i°i╣iiFi i┐i┐iFiiмi°i°i°i°i°i°iЙi°ifi°i°i°i°i°i°i°i°i°i°i°i°i(i°i▀iКiJi°iыi┬iБi╣iprint_subexp_standardMake selected stack frame return to its caller. Control remains in the debugger, but when you continue execution will resume in the frame above the one now selected. If an argument is given, it is an expression for the value to return.Select and print stack frame that called this one. An argument says how many frames up to go.Same as the `up' command, but does not print anything. This is useful in command scripts.Select and print stack frame called by this one. An argument says how many frames down to go.Same as the `down' command, but does not print anything. This is useful in command scripts.Select and print a stack frame. With no argument, print the selected stack frame. (See also "info frame"). An argument specifies the frame to select. It can be a stack frame number or the address of the frame. With argument, nothing is printed if input is coming from a command file or a user-defined command.Print the current stack frame. Select a stack frame without printing anything. An argument specifies the frame to select. It can be a stack frame number or the address of the frame. Print backtrace of all stack frames, or innermost COUNT frames. With a negative argument, print outermost -COUNT frames. Use of the 'full' qualifier also prints the values of the local variables. Print backtrace of all stack frames, or innermost COUNT frames and the values of the local variables. With a negative argument, print outermost -COUNT frames. Usage: T Backtrace of the stack, or innermost COUNT frames.All about selected stack frame, or frame at ADDR.Local variables of current stack frame.Argument variables of current stack frame.Argument and local variables of current stack frame.Select the stack frame that contains . Usage: func Show printing of non-scalar frame argumentsSet printing of non-scalar frame argumentsIf ON, GDB will display disassembly of the next source line, in addition to displaying the source line itself. If the next source line cannot be displayed (e.g., source is unavailable or there's no line info), GDB will display disassembly of next instruction instead of showing the source line. If AUTO, display disassembly of next instruction only if the source line cannot be displayed. If OFF (which is the default), never display the disassembly of the next source line.Show whether to disassemble next source line or insn when execution stops.Set whether to disassemble next source line or insn when execution stops.GDB can sometimes determine the values of function arguments at entry, in addition to their current values. This option tells GDB whether to print the current value, the value at entry (marked as val@entry), or both. Note that one or both of these values may be .Show printing of function arguments at function entrySet printing of function arguments at function entryDebugger's willingness to use disassemble-next-line is %s. Too many args in frame specificationPC unavailable, cannot determine args. No symbol table info available. arg->entry_kind == print_entry_values_no || arg->entry_kind == print_entry_values_only || (!ui_out_is_mi_like_p (uiout) && arg->entry_kind == print_entry_values_compact)Bottom (innermost) frame selected; you cannot go down.Initial frame selected; you cannot go up.PC unavailable, cannot determine locals. inline_skipped_frames (inferior_ptid) > 0get_frame_type (get_next_frame (frame)) == INLINE_FRAME!ui_out_is_mi_like_p (current_uiout)(More stack frames follow...) '%s' not within current stack frame. Can not force return from an inlined function.Return value type not available for selected stack frame. Please use an explicit cast of the value to return.The location at which to store the function's return value is unknown. If you continue, the return value that you specified will be ignored. %sMake selected stack frame return now? rv_conv != RETURN_VALUE_STRUCT_CONVENTION && rv_conv != RETURN_VALUE_ABI_RETURNS_ADDRESSup-silentlydowdown-silentlyframe-argumentsdisassemble-next-lineentry-valuesNo stack.Trying to set NULL pspace.No arguments. scalarsNo locals. nsym != NULLStack level %d, frame at Stack frame at (%s:%d)saved %s Outermost frame: %s tail call frame inlined into frame %d called by frame at caller of frame at source language %s. Arglist at unknown address. Arglist at numargs >= 0 no args. 1 arg: %d args: Locals at unknown address, Locals at Previous frame's sp is Previous frame's sp at Previous frame's sp in %s Saved registers:

Backtrace stopped: %s %sMake %s return now? Not confirmednoonlypreferredif-neededbothcompactdefaultx╗С6ZУЖ(СА\УГ\УИ\УТ\УЬ\Уб\Уй\Уframe_infoprint_frame_argsprint_frame_argreturn_commandprint_frameframe_show_addressread_frame_argDisplay currently known threads. Usage: info threads [ID]... Optional arguments are thread IDs with spaces between. If no arguments, all threads are displayed.Use this command to switch between threads. The new thread ID must be currently known.Apply a command to a list of threads.Apply a command to all threads.Set the current thread's name. Usage: thread name [NAME] If NAME is not given, then any existing name is removed.Find threads that match a regular expression. Usage: thread find REGEXP Will display thread ids whose name, target ID, or extra info matches REGEXP.Show printing of thread events (such as thread start and exit).Set printing of thread events (such as thread start and exit).Printing of thread events is %s. [Current thread is %d (%s) (exited)] Please specify a thread ID listPlease specify a command following the thread ID listCouldn't restore frame #%d in current thread, at reparsed frame #0 Thread %d has target name '%s' Thread %d has extra info '%s' Requested thread not found in requested processcurrent_thread != -1 || !thread_list || ptid_equal (inferior_ptid, null_ptid) The current thread has terminated. See `help thread'. No selected thread. See `help thread'. thread apply applythread-eventsthread.cNo thread selected[Current thread is %d (%s)] Thread %d has terminated. Thread %d (%s): frame_level >= 0tp->state != THREAD_EXITEDCommand requires an argument.Thread %d has name '%s' Thread %d has target id '%s' No threads match '%s' No threads. No threads match '%s'. Target Idtarget-idFramedetails%s "%s" (%s)%s "%s"(running) current-thread-idthread-idsnumber-of-threadsThread ID %d has terminated.[Switching to thread new-thread-id)]Thread ID %d not known.[New %s] Ёtirestore_selected_frameswitch_to_threadprint_thread_infofinish_thread_state_cleanupfinish_thread_stateset_stop_requestedset_executingis_executingis_thread_stateset_runninginferior_threadBad switch.exceptions.cbad stateval >= 0exception.reason <= 0gdb called without error_hook: %s catch_exceptions_with_msgthrow_itIf `unix', target file names (e.g., loaded shared library file names) starting the forward slash (`/') character are considered absolute, and the directory separator character is the forward slash (`/'). If `dos-based', target file names starting with a drive letter followed by a colon (e.g., `c:'), are also considered absolute, and the backslash (`\') is also considered a directory separator. Set to `auto' (which is the default), to let GDB decide, based on its knowledge of the target operating system.Show assumed file system kind for target reported file namesSet assumed file system kind for target reported file namesThe assumed file system kind for target reported file names is "%s" (currently "%s"). The assumed file system kind for target reported file names is "%s". target-file-system-kindautounixdos-based└iУ┼iУ╩iУUnix child processUnix child process (started by the "run" command).Use the "run" command to start a Unix child process.'''' ''' '''''''''['XExecute a command in an interpreter. It takes two arguments: The first argument is the name of the interpreter to use. The second argument is the command to execute. interp_lookup (interp->name) == NULL!top_level || !current_interpreter!top_level || !top_level_interpreter_ptrCould not suspend interpreter "%s".Failed to initialize new interp "%s" %sand could not restore old interp! Switching to interpreter "%.24s". usage: interpreter-exec [ ... ]Could not find interpreter "%s".Could not switch to interpreter "%s".interps.ctop_level_interpreter_ptrinterpreter-exec commanderror in command: "%s".VEC_char_ptr_quick_pushtop_level_interpreter_datainterp_setinterp_add.gnu_debugdataCannot parse .gnu_debugdata section; LZMA support was disabled at compile time/usr/local/bin/usr/local/share/locale/usr/lib/debug/usr/local/share/gdbInterpreter `%s' unrecognized warning: xdbdbxnhbatch-silentbatchannotateinit-commandinit-eval-commandiexdata-directorynowindowsstatisticsreturn-child-result%s: warning: error finding working directory: %s warning: could not set baud rate to `%s'. warning: could not set timeout limit to `%s'. Use `%s --help' for a complete list of options. %s: `--args' specified but no program specified Excess command line arguments ignored. (%s%s) This is the GNU debugger. Usage: gdb [options] [executable-file [core-file or process-id]] gdb [options] --args executable-file [inferior-arguments ...] Options: --args Arguments after executable-file are passed to inferior -b BAUDRATE Set serial port baud rate used for remote debugging. --batch Exit after processing options. --batch-silent As for --batch, but suppress all gdb stdout output. --return-child-result GDB exit code will be the child's exit code. --cd=DIR Change current directory to DIR. --command=FILE, -x Execute GDB commands from FILE. --eval-command=COMMAND, -ex Execute a single GDB command. May be used multiple times and in conjunction with --command. --init-command=FILE, -ix Like -x but execute it before loading inferior. --init-eval-command=COMMAND, -iex Like -ex but before loading inferior. --core=COREFILE Analyze the core dump COREFILE. --pid=PID Attach to running process PID. --dbx DBX compatibility mode. --directory=DIR Search for source files in DIR. --exec=EXECFILE Use EXECFILE as the executable. --fullname Output information used by emacs-GDB interface. --help Print this message. --interpreter=INTERP Select a specific interpreter / user interface -l TIMEOUT Set timeout in seconds for remote debugging. --nw Do not use a window interface. --nx Do not read any files. --nh Do not read file from home directory. --quiet Do not print version number on startup. --readnow Fully read symbol files on first access. --se=FILE Use FILE as symbol file and executable file. --symbols=SYMFILE Read symbols from SYMFILE. --tty=TTY Use TTY for input/output by the program being debugged. --tui Use a terminal user interface. --version Print version information and then exit. -w Use a window interface. --write Set writing into executable and core files. --xdb XDB compatibility mode. At startup, GDB reads the following init files and executes their commands: * system-wide init file: %s * user-specific init file: %s * local init file (see also 'set auto-load local-gdbinit'): ./%s For more information, type "help" from within GDB, or consult the GDB manual (available as on-line info or a printed manual). Interpreter `%s' failed to initialize. Can't attach to process and specify a core file at the same time.auto-load: Loading .gdbinit file "%s". ┌╔i╔╔iл╔iТ╔ip╔iD╔i5╔iю╚iз╚i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞iu╚i8╞i8╞iP╚i8╞i"╚i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i█╟i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞i8╞iз╟iЦ╟iU╟iI╟i0╟i8╞i8╞i╟i8╞i8╞i╪╞i8╞i8╞i8╞i╟╞i╕╞i8╞iп╞iб╞i8╞i8╞i8╞iщ╔iVEC_cmdarg_s_quick_pushfile1 && file2macrotab.c! included1 || ! included2! t->obstack! t->main_source__FILE____LINE__macro '%s' is #undefined twice, at %s:%d and %s:%dmacro `%s' redefined at %s:%d; original definition at %s:%dboth `%s' and `%s' allegedly #included at %s:%dcompare_locationsmacro_allow_redefinitionsmacro_mainmacro_set_mainPrefix for commands dealing with C preprocessor macros.Fully expand any C/C++ preprocessor macro invocations in EXPRESSION. Show the expanded expression.Expand C/C++ preprocessor macro invocations appearing directly in EXPRESSION. Show the expanded expression. This command differs from `macro expand' in that it only expands macro invocations that appear directly in EXPRESSION; if expanding a macro introduces further macro invocations, those are left unexpanded. `macro expand-once' helps you see how a particular macro expands, whereas `macro expand' shows you how all the macros involved in an expression work together to yield a pre-processed expression.Show the definition of MACRO, and it's source location. Usage: info macro [-a|-all] [--] MACRO Options: -a, --all Output all definitions of MACRO in the current compilation unit. -- Specify the end of arguments and the beginning of the MACRO.Show the definitions of all macros at LINESPEC, or the current source location. Usage: info macros [LINESPEC]Define a new C/C++ preprocessor macro. The GDB command `macro define DEFINITION' is equivalent to placing a preprocessor directive of the form `#define DEFINITION' such that the definition is visible in all the inferior's source files. For example: (gdb) macro define PI (3.1415926) (gdb) macro define MIN(x,y) ((x) < (y) ? (x) : (y))Remove the definition of the C/C++ preprocessor macro with the given name.List all the macros defined using the `macro define' command.GDB has no preprocessor macro information for that code. Unrecognized option '%s' to info macro command. Try "help info macro".You must follow the `info macro' command with the name of the macro whose definition you want to see.The symbol `%s' has no definition as a C/C++ preprocessor macro at You must follow the `macro expand-once' command with the expression you want to expand.You must follow the `macro expand' command with the expression you want to expand."macro" must be followed by the name of a macro command. usage: macro define NAME[(ARGUMENT-LIST)] [REPLACEMENT-LIST]Two macro arguments with identical names.',' or ')' expected at end of macro arguments.macro expand-onceundefmacro define %susage: macro undef NAMEInvalid macro name. included at %s:%d Defined at #define %s-D%sexpands to: Macro is missing an argument.Expand-once not implemented yet.Unterminated comment in macro expansion.A character constant must contain at least one character.Newline characters may not appear in string constants.unable to avoid splicing tokens during macro expansionMalformed argument list for macro `%s'.Wrong number of arguments to macro `%s' (expected %d, got %d).Stringification operator requires an argument.Argument to stringification operator must name a macro parameter.Splicing operator at end of macrosrc->sharedmacroexp.ceEpPunexpected character constant! b->sharedsrc->last_token != -1dest->last_token != -1__VA_ARGS__dest->len == 0Stray splicing operatorsrc_first->sharedsrc_rest->shared! dest->sharedb->size%>%:%:##:><:<%get_tokenget_character_constantget_string_literal35У[║Оw█К)╞Ц>ПМ<уЕ╙чЧКуЕфЕхЧёBЖ└{Т╥°ОeKЕs╕ПЛ ОЗБЦp╕ПИБЦv╕ПS¤Ех╖ПCпМш╖ПВ╕Пщ╖Пy╕П│тЕ*НУ-НУ/НУ|╕П╞BЕЕ╕ПБсЧ2НУеЎЕ5НУ∙аы╖П╕ПХЄХl╕ПdлМm╕П8НУ;НУ▐lвh╕ПСРЧi╕ПoХт╖ПЗсЧmaybe_expandsubstitute_argsresize_bufferappend_tokens_without_splicingscanfree_bufferfree_buffer_return_textsymtab found for `%s', but that file is not covered in the compilation unit's macro informationbreakpoint-hitread-watchpoint-triggeraccess-watchpoint-triggerfunction-finishedlocation-reachedwatchpoint-scopeend-stepping-rangeexited-signalledexitedexited-normallysignal-receivedsolib-eventsyscall-entrysyscall-returnHРУ\РУWРУoРУЙРУЫРУмРУ╜РУ╨РУсРУшРУ°РУСУ╔(С╜(ССУ"СУ▓(Сprev_ptrevent-loop.cError detected on fd %d Invalid or non-`poll'able fd %d Exception condition detected on fd %d delete_async_event_handlerdelete_async_signal_handlerqueue_gdb_event_p_freequeue_gdb_event_p_lengthqueue_gdb_event_p_iteratequeue_gdb_event_p_remove_elemqueue_gdb_event_p_is_emptyqueue_gdb_event_p_peekqueue_gdb_event_p_dequequeue_gdb_event_p_enqueerror detected on stdin post-server Erroneous arithmetic operation.Could not kill the program being debuggedEvent type not recognized. list == NULLcompleter.c *|"';:?><╤хвgdb_completion_word_break_characters╪ФУGФУVEC_char_ptr_quick_push !@#$%^&*()+=|~`}{[]"';:?/>.<,When non-zero, architecture debugging is enabled.Architecture debugging is %s. data->index < gdbarch->nr_datagdbarch->data[data->index] != NULLgdbarch->data[data->index] == NULLgdbarch->iterate_over_objfiles_in_search_order != NULLgdbarch_iterate_over_objfiles_in_search_order called gdbarch->core_info_proc != NULLgdbarch_core_info_proc called gdbarch->gen_return_address != NULLgdbarch_gen_return_address called gdbarch_has_dos_based_file_system called gdbarch_solib_symbols_extension called gdbarch->auto_wide_charset != NULLgdbarch_auto_wide_charset called gdbarch->fast_tracepoint_valid_at != NULLgdbarch_fast_tracepoint_valid_at called gdbarch->has_shared_address_space != NULLgdbarch_has_shared_address_space called gdbarch_has_global_breakpoints called gdbarch_has_global_solist called gdbarch->stap_parse_special_token != NULLgdbarch_stap_parse_special_token called gdbarch->stap_is_single_operand != NULLgdbarch_stap_is_single_operand called gdbarch_stap_gdb_register_suffix called gdbarch_stap_gdb_register_prefix called gdbarch_stap_register_indirection_suffix called gdbarch_stap_register_indirection_prefix called gdbarch_stap_register_suffix called gdbarch_stap_register_prefix called gdbarch_stap_integer_suffix called gdbarch_stap_integer_prefix called gdbarch->get_syscall_number != NULLgdbarch_get_syscall_number called gdbarch->record_special_symbol != NULLgdbarch_record_special_symbol called gdbarch->get_siginfo_type != NULLgdbarch_get_siginfo_type called gdbarch->gdb_signal_from_target != NULLgdbarch_gdb_signal_from_target called gdbarch->process_record_signal != NULLgdbarch_process_record_signal called gdbarch->process_record != NULLgdbarch_process_record called gdbarch_sofun_address_maybe_missing called gdbarch->static_transform_name != NULLgdbarch_static_transform_name called gdbarch->core_read_description != NULLgdbarch_core_read_description called gdbarch->overlay_update != NULLgdbarch_overlay_update called gdbarch->relocate_instruction != NULLgdbarch_relocate_instruction called gdbarch->displaced_step_location != NULLgdbarch_displaced_step_location called gdbarch->displaced_step_free_closure != NULLgdbarch_displaced_step_free_closure called gdbarch->displaced_step_fixup != NULLgdbarch_displaced_step_fixup called gdbarch->displaced_step_hw_singlestep != NULLgdbarch_displaced_step_hw_singlestep called gdbarch->displaced_step_copy_insn != NULLgdbarch_displaced_step_copy_insn called gdbarch_max_insn_length called gdbarch->skip_permanent_breakpoint != NULLgdbarch_skip_permanent_breakpoint called gdbarch_vtable_function_descriptors called gdbarch->gcore_bfd_target != 0gdbarch_gcore_bfd_target called gdbarch->core_pid_to_str != NULLgdbarch_core_pid_to_str called gdbarch->core_xfer_shared_libraries != NULLgdbarch_core_xfer_shared_libraries called gdbarch->find_memory_regions != NULLgdbarch_find_memory_regions called gdbarch->elfcore_write_linux_prpsinfo != NULLgdbarch_elfcore_write_linux_prpsinfo called gdbarch->make_corefile_notes != NULLgdbarch_make_corefile_notes called gdbarch_core_regset_sections called gdbarch->regset_from_core_section != NULLgdbarch_regset_from_core_section called gdbarch->fetch_pointer_argument != NULLgdbarch_fetch_pointer_argument called gdbarch->register_reggroup_p != NULLgdbarch_register_reggroup_p called gdbarch->address_class_name_to_type_flags != NULLgdbarch_address_class_name_to_type_flags called gdbarch->address_class_type_flags_to_name != NULLgdbarch_address_class_type_flags_to_name called gdbarch->address_class_type_flags != NULLgdbarch_address_class_type_flags called gdbarch_have_nonsteppable_watchpoint called gdbarch_cannot_step_breakpoint called gdbarch->coff_make_msymbol_special != NULLgdbarch_coff_make_msymbol_special called gdbarch->elf_make_msymbol_special != NULLgdbarch_elf_make_msymbol_special called gdbarch->in_function_epilogue_p != NULLgdbarch_in_function_epilogue_p called gdbarch->in_solib_return_trampoline != NULLgdbarch_in_solib_return_trampoline called gdbarch->skip_solib_resolver != NULLgdbarch_skip_solib_resolver called gdbarch->skip_trampoline_code != NULLgdbarch_skip_trampoline_code called gdbarch->single_step_through_delay != NULLgdbarch_single_step_through_delay called gdbarch->software_single_step != NULLgdbarch_software_single_step called gdbarch->addr_bits_remove != NULLgdbarch_addr_bits_remove called gdbarch->convert_from_func_ptr_addr != NULLgdbarch_convert_from_func_ptr_addr called gdbarch_frame_red_zone_size called gdbarch->stabs_argument_has_addr != NULLgdbarch_stabs_argument_has_addr called gdbarch->frame_num_args != NULLgdbarch_frame_num_args called gdbarch_frame_args_skip called gdbarch->fetch_tls_load_module_address != NULLgdbarch_fetch_tls_load_module_address called gdbarch->remote_register_number != NULLgdbarch_remote_register_number called gdbarch_deprecated_function_start_offset called gdbarch_decr_pc_after_break called gdbarch->memory_remove_breakpoint != NULLgdbarch_memory_remove_breakpoint called gdbarch->memory_insert_breakpoint != NULLgdbarch_memory_insert_breakpoint called gdbarch->adjust_breakpoint_address != NULLgdbarch_adjust_breakpoint_address called gdbarch->remote_breakpoint_from_pc != NULLgdbarch_remote_breakpoint_from_pc called gdbarch->breakpoint_from_pc != NULLgdbarch_breakpoint_from_pc called gdbarch->skip_main_prologue != NULLgdbarch_skip_main_prologue called gdbarch->skip_prologue != NULLgdbarch->return_in_first_hidden_param_p != NULLgdbarch_return_in_first_hidden_param_p called gdbarch->integer_to_address != NULLgdbarch_integer_to_address called gdbarch->address_to_pointer != NULLgdbarch_address_to_pointer called gdbarch->pointer_to_address != NULLgdbarch_pointer_to_address called gdbarch->value_from_register != NULLgdbarch_value_from_register called gdbarch->value_to_register != NULLgdbarch_value_to_register called gdbarch->register_to_value != NULLgdbarch_register_to_value called gdbarch->convert_register_p != NULLgdbarch_convert_register_p called gdbarch_believe_pcc_promotion called gdbarch->get_longjmp_target != NULLgdbarch_get_longjmp_target called gdbarch->cannot_store_register != NULLgdbarch_cannot_store_register called gdbarch->cannot_fetch_register != NULLgdbarch_cannot_fetch_register called gdbarch->register_sim_regno != NULLgdbarch_register_sim_regno called gdbarch->print_vector_info != NULLgdbarch_print_vector_info called gdbarch->print_float_info != NULLgdbarch_print_float_info called gdbarch->print_registers_info != NULLgdbarch_print_registers_info called gdbarch->push_dummy_code != NULLgdbarch_push_dummy_code called gdbarch_call_dummy_location called gdbarch->push_dummy_call != NULLgdbarch_push_dummy_call called gdbarch_deprecated_fp_regnum called gdbarch->register_type != NULLgdbarch->register_name != NULLgdbarch->dwarf2_reg_to_regnum != NULLgdbarch_dwarf2_reg_to_regnum called gdbarch->sdb_reg_to_regnum != NULLgdbarch_sdb_reg_to_regnum called gdbarch->ecoff_reg_to_regnum != NULLgdbarch_ecoff_reg_to_regnum called gdbarch->stab_reg_to_regnum != NULLgdbarch_stab_reg_to_regnum called gdbarch->ax_pseudo_register_push_stack != NULLgdbarch_ax_pseudo_register_push_stack called gdbarch->ax_pseudo_register_collect != NULLgdbarch_ax_pseudo_register_collect called gdbarch_num_pseudo_regs called gdbarch->pseudo_register_write != NULLgdbarch_pseudo_register_write called gdbarch->pseudo_register_read_value != NULLgdbarch_pseudo_register_read_value called gdbarch->pseudo_register_read != NULLgdbarch_pseudo_register_read called gdbarch->virtual_frame_pointer != NULLgdbarch_virtual_frame_pointer called gdbarch->dwarf2_addr_size != 0gdbarch_dwarf2_addr_size called gdbarch_long_double_format called gdbarch_long_double_bit called gdbarch_long_long_align_bit called gdbarch_bits_big_endian called gdbarch_byte_order_for_code called gdbarch: Attempt to register unknown architecture (%d)gdbarch: Duplicate registration of architecture (%s)register_gdbarch_init (%s, %s) gdbarch_architecture_names: multi-arch unknowngdbarch_dump: GDB_NM_FILE = %s gdbarch_dump: addr_bits_remove = <%s> gdbarch_dump: gdbarch_address_class_name_to_type_flags_p() = %d gdbarch_dump: address_class_name_to_type_flags = <%s> gdbarch_dump: gdbarch_address_class_type_flags_p() = %d gdbarch_dump: address_class_type_flags = <%s> gdbarch_dump: gdbarch_address_class_type_flags_to_name_p() = %d gdbarch_dump: address_class_type_flags_to_name = <%s> gdbarch_dump: address_to_pointer = <%s> gdbarch_dump: gdbarch_adjust_breakpoint_address_p() = %d gdbarch_dump: adjust_breakpoint_address = <%s> gdbarch_dump: auto_charset = <%s> gdbarch_dump: auto_wide_charset = <%s> gdbarch_dump: gdbarch_ax_pseudo_register_collect_p() = %d gdbarch_dump: ax_pseudo_register_collect = <%s> gdbarch_dump: gdbarch_ax_pseudo_register_push_stack_p() = %d gdbarch_dump: ax_pseudo_register_push_stack = <%s> gdbarch_dump: believe_pcc_promotion = %s gdbarch_dump: bfd_arch_info = %s gdbarch_dump: bits_big_endian = %s gdbarch_dump: breakpoint_from_pc = <%s> gdbarch_dump: byte_order = %s gdbarch_dump: byte_order_for_code = %s gdbarch_dump: call_dummy_location = %s gdbarch_dump: cannot_fetch_register = <%s> gdbarch_dump: cannot_step_breakpoint = %s gdbarch_dump: cannot_store_register = <%s> gdbarch_dump: char_signed = %s gdbarch_dump: coff_make_msymbol_special = <%s> gdbarch_dump: convert_from_func_ptr_addr = <%s> gdbarch_dump: convert_register_p = <%s> gdbarch_dump: gdbarch_core_info_proc_p() = %d gdbarch_dump: core_info_proc = <%s> gdbarch_dump: gdbarch_core_pid_to_str_p() = %d gdbarch_dump: core_pid_to_str = <%s> gdbarch_dump: gdbarch_core_read_description_p() = %d gdbarch_dump: core_read_description = <%s> gdbarch_dump: core_regset_sections = %s gdbarch_dump: gdbarch_core_xfer_shared_libraries_p() = %d gdbarch_dump: core_xfer_shared_libraries = <%s> gdbarch_dump: decr_pc_after_break = %s gdbarch_dump: deprecated_fp_regnum = %s gdbarch_dump: deprecated_function_start_offset = %s gdbarch_dump: gdbarch_displaced_step_copy_insn_p() = %d gdbarch_dump: displaced_step_copy_insn = <%s> gdbarch_dump: gdbarch_displaced_step_fixup_p() = %d gdbarch_dump: displaced_step_fixup = <%s> gdbarch_dump: displaced_step_free_closure = <%s> gdbarch_dump: displaced_step_hw_singlestep = <%s> gdbarch_dump: displaced_step_location = <%s> gdbarch_dump: double_bit = %s gdbarch_dump: double_format = %s gdbarch_dump: gdbarch_dummy_id_p() = %d gdbarch_dump: dummy_id = <%s> gdbarch_dump: dwarf2_addr_size = %s gdbarch_dump: dwarf2_reg_to_regnum = <%s> gdbarch_dump: ecoff_reg_to_regnum = <%s> gdbarch_dump: elf_make_msymbol_special = <%s> gdbarch_dump: gdbarch_elfcore_write_linux_prpsinfo_p() = %d gdbarch_dump: elfcore_write_linux_prpsinfo = <%s> gdbarch_dump: fast_tracepoint_valid_at = <%s> gdbarch_dump: gdbarch_fetch_pointer_argument_p() = %d gdbarch_dump: fetch_pointer_argument = <%s> gdbarch_dump: gdbarch_fetch_tls_load_module_address_p() = %d gdbarch_dump: fetch_tls_load_module_address = <%s> gdbarch_dump: gdbarch_find_memory_regions_p() = %d gdbarch_dump: find_memory_regions = <%s> gdbarch_dump: float_format = %s gdbarch_dump: fp0_regnum = %s gdbarch_dump: gdbarch_frame_align_p() = %d gdbarch_dump: frame_align = <%s> gdbarch_dump: frame_args_skip = %s gdbarch_dump: gdbarch_frame_num_args_p() = %d gdbarch_dump: frame_num_args = <%s> gdbarch_dump: frame_red_zone_size = %s gdbarch_dump: gdbarch_gcore_bfd_target_p() = %d gdbarch_dump: gcore_bfd_target = %s gdbarch_dump: gdbarch_gdb_signal_from_target_p() = %d gdbarch_dump: gdb_signal_from_target = <%s> gdbarch_dump: gen_return_address = <%s> gdbarch_dump: gdbarch_get_longjmp_target_p() = %d gdbarch_dump: get_longjmp_target = <%s> gdbarch_dump: gdbarch_get_siginfo_type_p() = %d gdbarch_dump: get_siginfo_type = <%s> gdbarch_dump: gdbarch_get_syscall_number_p() = %d gdbarch_dump: get_syscall_number = <%s> gdbarch_dump: half_format = %s gdbarch_dump: has_dos_based_file_system = %s gdbarch_dump: has_global_breakpoints = %s gdbarch_dump: has_global_solist = %s gdbarch_dump: has_shared_address_space = <%s> gdbarch_dump: have_nonsteppable_watchpoint = %s gdbarch_dump: in_function_epilogue_p = <%s> gdbarch_dump: in_solib_return_trampoline = <%s> gdbarch_dump: gdbarch_info_proc_p() = %d gdbarch_dump: info_proc = <%s> gdbarch_dump: inner_than = <%s> gdbarch_dump: gdbarch_integer_to_address_p() = %d gdbarch_dump: integer_to_address = <%s> gdbarch_dump: iterate_over_objfiles_in_search_order = <%s> gdbarch_dump: long_double_bit = %s gdbarch_dump: long_double_format = %s gdbarch_dump: long_long_align_bit = %s gdbarch_dump: long_long_bit = %s gdbarch_dump: gdbarch_make_corefile_notes_p() = %d gdbarch_dump: make_corefile_notes = <%s> gdbarch_dump: gdbarch_max_insn_length_p() = %d gdbarch_dump: max_insn_length = %s gdbarch_dump: memory_insert_breakpoint = <%s> gdbarch_dump: memory_remove_breakpoint = <%s> gdbarch_dump: num_pseudo_regs = %s gdbarch_dump: gdbarch_overlay_update_p() = %d gdbarch_dump: overlay_update = <%s> gdbarch_dump: pointer_to_address = <%s> gdbarch_dump: gdbarch_print_float_info_p() = %d gdbarch_dump: print_float_info = <%s> gdbarch_dump: print_insn = <%s> gdbarch_dump: print_registers_info = <%s> gdbarch_dump: gdbarch_print_vector_info_p() = %d gdbarch_dump: print_vector_info = <%s> gdbarch_dump: gdbarch_process_record_p() = %d gdbarch_dump: process_record = <%s> gdbarch_dump: gdbarch_process_record_signal_p() = %d gdbarch_dump: process_record_signal = <%s> gdbarch_dump: gdbarch_pseudo_register_read_p() = %d gdbarch_dump: pseudo_register_read = <%s> gdbarch_dump: gdbarch_pseudo_register_read_value_p() = %d gdbarch_dump: pseudo_register_read_value = <%s> gdbarch_dump: gdbarch_pseudo_register_write_p() = %d gdbarch_dump: pseudo_register_write = <%s> gdbarch_dump: gdbarch_push_dummy_call_p() = %d gdbarch_dump: push_dummy_call = <%s> gdbarch_dump: gdbarch_push_dummy_code_p() = %d gdbarch_dump: push_dummy_code = <%s> gdbarch_dump: ravenscar_ops = %s gdbarch_dump: gdbarch_read_pc_p() = %d gdbarch_dump: gdbarch_record_special_symbol_p() = %d gdbarch_dump: record_special_symbol = <%s> gdbarch_dump: register_name = <%s> gdbarch_dump: register_reggroup_p = <%s> gdbarch_dump: register_sim_regno = <%s> gdbarch_dump: register_to_value = <%s> gdbarch_dump: gdbarch_register_type_p() = %d gdbarch_dump: register_type = <%s> gdbarch_dump: gdbarch_regset_from_core_section_p() = %d gdbarch_dump: regset_from_core_section = <%s> gdbarch_dump: gdbarch_relocate_instruction_p() = %d gdbarch_dump: relocate_instruction = <%s> gdbarch_dump: remote_breakpoint_from_pc = <%s> gdbarch_dump: remote_register_number = <%s> gdbarch_dump: return_in_first_hidden_param_p = <%s> gdbarch_dump: gdbarch_return_value_p() = %d gdbarch_dump: return_value = <%s> gdbarch_dump: sdb_reg_to_regnum = <%s> gdbarch_dump: gdbarch_single_step_through_delay_p() = %d gdbarch_dump: single_step_through_delay = <%s> gdbarch_dump: gdbarch_skip_main_prologue_p() = %d gdbarch_dump: skip_main_prologue = <%s> gdbarch_dump: gdbarch_skip_permanent_breakpoint_p() = %d gdbarch_dump: skip_permanent_breakpoint = <%s> gdbarch_dump: skip_prologue = <%s> gdbarch_dump: skip_solib_resolver = <%s> gdbarch_dump: skip_trampoline_code = <%s> gdbarch_dump: gdbarch_software_single_step_p() = %d gdbarch_dump: software_single_step = <%s> gdbarch_dump: sofun_address_maybe_missing = %s gdbarch_dump: solib_symbols_extension = %s gdbarch_dump: stab_reg_to_regnum = <%s> gdbarch_dump: stabs_argument_has_addr = <%s> gdbarch_dump: stap_gdb_register_prefix = %s gdbarch_dump: stap_gdb_register_suffix = %s gdbarch_dump: stap_integer_prefix = %s gdbarch_dump: stap_integer_suffix = %s gdbarch_dump: gdbarch_stap_is_single_operand_p() = %d gdbarch_dump: stap_is_single_operand = <%s> gdbarch_dump: gdbarch_stap_parse_special_token_p() = %d gdbarch_dump: stap_parse_special_token = <%s> gdbarch_dump: stap_register_indirection_prefix = %s gdbarch_dump: stap_register_indirection_suffix = %s gdbarch_dump: stap_register_prefix = %s gdbarch_dump: stap_register_suffix = %s gdbarch_dump: gdbarch_static_transform_name_p() = %d gdbarch_dump: static_transform_name = <%s> gdbarch_dump: target_desc = %s gdbarch_dump: gdbarch_unwind_pc_p() = %d gdbarch_dump: unwind_pc = <%s> gdbarch_dump: gdbarch_unwind_sp_p() = %d gdbarch_dump: unwind_sp = <%s> gdbarch_dump: value_from_register = <%s> gdbarch_dump: value_to_register = <%s> gdbarch_dump: vbit_in_delta = %s gdbarch_dump: virtual_frame_pointer = <%s> gdbarch_dump: vtable_function_descriptors = %s gdbarch_dump: gdbarch_write_pc_p() = %d gdbarch_dump: write_pc = <%s> gdbarch_find_by_info: info.bfd_arch_info %s gdbarch_find_by_info: info.byte_order %d (%s) gdbarch_find_by_info: info.osabi %d (%s) gdbarch_find_by_info: info.abfd %s gdbarch_find_by_info: info.tdep_info %s gdbarch_find_by_info: No matching architecture gdbarch_find_by_info: Target rejected architecture gdbarch_find_by_info: Previous architecture %s (%s) selected (*list) != NULL && (*list)->gdbarch == new_gdbarchgdbarch_find_by_info: New architecture %s (%s) selected verify_gdbarch: the following are invalid ...%sShow architecture debugging.Set architecture debugging.gdbarch.cdata->init_pdata->pre_init == NULLnew_gdbarch != NULLnew_gdbarch->initialized_pgdbarch_ravenscar_ops called gdbarch->info_proc != NULLgdbarch_info_proc called gdbarch->auto_charset != NULLgdbarch_auto_charset called gdbarch->max_insn_length != 0gdbarch_vbit_in_delta called gdbarch->print_insn != NULLgdbarch_print_insn called gdbarch->frame_align != NULLgdbarch_frame_align called gdbarch->unwind_sp != NULLgdbarch_unwind_sp called gdbarch->unwind_pc != NULLgdbarch_unwind_pc called gdbarch->inner_than != NULLgdbarch_inner_than called gdbarch_skip_prologue called gdbarch->return_value != NULLgdbarch_return_value called gdbarch->dummy_id != NULLgdbarch_dummy_id called gdbarch_register_type called gdbarch_register_name called gdbarch_fp0_regnum called gdbarch_ps_regnum called gdbarch_pc_regnum called gdbarch_sp_regnum called gdbarch->num_regs != -1gdbarch_num_regs called gdbarch->write_pc != NULLgdbarch_write_pc called gdbarch->read_pc != NULLgdbarch_read_pc called gdbarch->char_signed != -1gdbarch_char_signed called gdbarch->addr_bit != 0gdbarch_addr_bit called gdbarch_ptr_bit called gdbarch_double_format called gdbarch_double_bit called gdbarch_float_format called gdbarch_float_bit called gdbarch_half_format called gdbarch_half_bit called gdbarch_long_long_bit called gdbarch_long_bit called gdbarch_int_bit called gdbarch_short_bit called gdbarch_target_desc called gdbarch_osabi called gdbarch_byte_order called gdbarch_bfd_arch_info called gdbarch_tdep called config/nm-linux.hgdbarch_dump: addr_bit = %s gdbarch_dump: float_bit = %s gdbarch_dump: half_bit = %s gdbarch_dump: int_bit = %s gdbarch_dump: long_bit = %s gdbarch_dump: num_regs = %s gdbarch_dump: osabi = %s gdbarch_dump: pc_regnum = %s gdbarch_dump: ps_regnum = %s gdbarch_dump: ptr_bit = %s gdbarch_dump: read_pc = <%s> gdbarch_dump: short_bit = %s gdbarch_dump: sp_regnum = %s info.bfd_arch_info != NULL byte-order bfd_arch_info num_regs register_name skip_prologue inner_than breakpoint_from_pc print_insn displaced_step_free_closure displaced_step_location!arch->initialized_pgdbarch->data == NULLset_target_gdbarchgdbarch_find_by_infogdbarch_datadeprecated_set_gdbarch_datagdbarch_ravenscar_opsgdbarch_iterate_over_objfiles_in_search_ordergdbarch_core_info_procgdbarch_core_info_proc_pgdbarch_info_procgdbarch_info_proc_pgdbarch_gen_return_addressgdbarch_has_dos_based_file_systemgdbarch_solib_symbols_extensiongdbarch_auto_wide_charsetgdbarch_auto_charsetgdbarch_fast_tracepoint_valid_atgdbarch_has_shared_address_spacegdbarch_has_global_breakpointsgdbarch_has_global_solistgdbarch_stap_parse_special_tokengdbarch_stap_parse_special_token_pgdbarch_stap_is_single_operandgdbarch_stap_is_single_operand_pgdbarch_stap_gdb_register_suffixgdbarch_stap_gdb_register_prefixgdbarch_stap_register_indirection_suffixgdbarch_stap_register_indirection_prefixgdbarch_stap_register_suffixgdbarch_stap_register_prefixgdbarch_stap_integer_suffixgdbarch_stap_integer_prefixgdbarch_get_syscall_numbergdbarch_get_syscall_number_pgdbarch_record_special_symbolgdbarch_record_special_symbol_pgdbarch_get_siginfo_typegdbarch_get_siginfo_type_pgdbarch_gdb_signal_from_targetgdbarch_gdb_signal_from_target_pgdbarch_process_record_signalgdbarch_process_record_signal_pgdbarch_process_recordgdbarch_process_record_pgdbarch_sofun_address_maybe_missinggdbarch_static_transform_namegdbarch_static_transform_name_pgdbarch_core_read_descriptiongdbarch_core_read_description_pgdbarch_overlay_updategdbarch_overlay_update_pgdbarch_relocate_instructiongdbarch_relocate_instruction_pgdbarch_displaced_step_locationgdbarch_displaced_step_free_closuregdbarch_displaced_step_fixupgdbarch_displaced_step_fixup_pgdbarch_displaced_step_hw_singlestepgdbarch_displaced_step_copy_insngdbarch_displaced_step_copy_insn_pgdbarch_max_insn_lengthgdbarch_max_insn_length_pgdbarch_skip_permanent_breakpointgdbarch_skip_permanent_breakpoint_pgdbarch_vbit_in_deltagdbarch_vtable_function_descriptorsgdbarch_gcore_bfd_targetgdbarch_gcore_bfd_target_pgdbarch_core_pid_to_strgdbarch_core_pid_to_str_pgdbarch_core_xfer_shared_librariesgdbarch_core_xfer_shared_libraries_pgdbarch_find_memory_regionsgdbarch_find_memory_regions_pgdbarch_elfcore_write_linux_prpsinfogdbarch_elfcore_write_linux_prpsinfo_pgdbarch_make_corefile_notesgdbarch_make_corefile_notes_pgdbarch_core_regset_sectionsgdbarch_regset_from_core_sectiongdbarch_regset_from_core_section_pgdbarch_fetch_pointer_argumentgdbarch_fetch_pointer_argument_pgdbarch_register_reggroup_pgdbarch_address_class_name_to_type_flagsgdbarch_address_class_name_to_type_flags_pgdbarch_address_class_type_flags_to_namegdbarch_address_class_type_flags_to_name_pgdbarch_address_class_type_flagsgdbarch_address_class_type_flags_pgdbarch_have_nonsteppable_watchpointgdbarch_cannot_step_breakpointgdbarch_coff_make_msymbol_specialgdbarch_elf_make_msymbol_specialgdbarch_in_function_epilogue_pgdbarch_in_solib_return_trampolinegdbarch_skip_solib_resolvergdbarch_skip_trampoline_codegdbarch_print_insngdbarch_single_step_through_delaygdbarch_single_step_through_delay_pgdbarch_software_single_stepgdbarch_software_single_step_pgdbarch_addr_bits_removegdbarch_convert_from_func_ptr_addrgdbarch_frame_red_zone_sizegdbarch_stabs_argument_has_addrgdbarch_frame_aligngdbarch_frame_align_pgdbarch_frame_num_argsgdbarch_frame_num_args_pgdbarch_unwind_spgdbarch_unwind_sp_pgdbarch_unwind_pcgdbarch_unwind_pc_pgdbarch_frame_args_skipgdbarch_fetch_tls_load_module_addressgdbarch_fetch_tls_load_module_address_pgdbarch_remote_register_numbergdbarch_deprecated_function_start_offsetgdbarch_decr_pc_after_breakgdbarch_memory_remove_breakpointgdbarch_memory_insert_breakpointgdbarch_adjust_breakpoint_addressgdbarch_adjust_breakpoint_address_pgdbarch_remote_breakpoint_from_pcgdbarch_breakpoint_from_pcgdbarch_inner_thangdbarch_skip_main_prologuegdbarch_skip_main_prologue_pgdbarch_skip_prologuegdbarch_return_in_first_hidden_param_pgdbarch_return_valuegdbarch_return_value_pgdbarch_integer_to_addressgdbarch_integer_to_address_pgdbarch_address_to_pointergdbarch_pointer_to_addressgdbarch_value_from_registergdbarch_value_to_registergdbarch_register_to_valuegdbarch_convert_register_pgdbarch_believe_pcc_promotiongdbarch_get_longjmp_targetgdbarch_get_longjmp_target_pgdbarch_cannot_store_registergdbarch_cannot_fetch_registergdbarch_register_sim_regnogdbarch_print_vector_infogdbarch_print_vector_info_pgdbarch_print_float_infogdbarch_print_float_info_pgdbarch_print_registers_infogdbarch_push_dummy_codegdbarch_push_dummy_code_pgdbarch_call_dummy_locationgdbarch_push_dummy_callgdbarch_push_dummy_call_pgdbarch_deprecated_fp_regnumgdbarch_dummy_idgdbarch_dummy_id_pgdbarch_register_typegdbarch_register_type_pgdbarch_register_namegdbarch_dwarf2_reg_to_regnumgdbarch_sdb_reg_to_regnumgdbarch_ecoff_reg_to_regnumgdbarch_stab_reg_to_regnumgdbarch_fp0_regnumgdbarch_ps_regnumgdbarch_pc_regnumgdbarch_sp_regnumgdbarch_ax_pseudo_register_push_stackgdbarch_ax_pseudo_register_push_stack_pgdbarch_ax_pseudo_register_collectgdbarch_ax_pseudo_register_collect_pgdbarch_num_pseudo_regsgdbarch_num_regsgdbarch_pseudo_register_writegdbarch_pseudo_register_write_pgdbarch_pseudo_register_read_valuegdbarch_pseudo_register_read_value_pgdbarch_pseudo_register_readgdbarch_pseudo_register_read_pgdbarch_virtual_frame_pointergdbarch_write_pcgdbarch_write_pc_pgdbarch_read_pcgdbarch_read_pc_pgdbarch_char_signedgdbarch_dwarf2_addr_sizegdbarch_addr_bitgdbarch_ptr_bitgdbarch_long_double_formatgdbarch_long_double_bitgdbarch_double_formatgdbarch_double_bitgdbarch_float_formatgdbarch_float_bitgdbarch_half_formatgdbarch_half_bitgdbarch_long_long_align_bitgdbarch_long_long_bitgdbarch_long_bitgdbarch_int_bitgdbarch_short_bitgdbarch_bits_big_endiangdbarch_target_descgdbarch_osabigdbarch_byte_order_for_codegdbarch_byte_ordergdbarch_bfd_arch_infogdbarch_freealloc_gdbarch_dataShow endianness of target.Set endianness of target.info->bfd_arch_info != NULLarch-utils.cset_endian: bad valueShow architecture of target.Set architecture of target.architectureThis architecture has no method to collect a return address.The target endianness is set automatically (currently big endian) The target endianness is set automatically (currently little endian) The target is assumed to be big endian The target is assumed to be little endian Selected architecture %s is not compatible with reported target architecture %sSelected architecture %s is ambiguous with reported target architecture %sThe target architecture is set automatically (currently %s) The target architecture is assumed to be %s Architecture of file not recognized.gdbarch_update_p: Architecture not found gdbarch_update_p: Architecture %s (%s) unchanged gdbarch_update_p: New architecture %s (%s) selected set_endian: architecture update failedLittle endian target not supported by GDB Big endian target not supported by GDB initialize_current_architecture: No archinitialize_current_architecture: Arch not foundinitialize_current_architecture: Selection of initial architecture failedcould not select an architecture automaticallyset_architecture: bfd_scan_arch failedArchitecture `%s' not recognized. No virtual frame pointer availableregnum >= 0 && regnum < gdbarch_num_regs (gdbarch)АФДФЛФbiglittleautogdbarch_info_filllegacy_register_sim_regnoWhen enabled, ranking of the functions is displayed.Show debugging of C++ overloading.Set debugging of C++ overloading.Show resolution of opaque struct/class/union types (if set before loading symbols).Set resolution of opaque struct/class/union types (if set before loading symbols).Resolution of opaque struct/class/union types (if set before loading symbols) is %s. Debugging of C++ overloading is %s. TYPE_ADDRESS_CLASS_ALL (chain) == 0TYPE_INSTANCE_FLAGS (ntype) == TYPE_INSTANCE_FLAGS (type)TYPE_CODE (type) == TYPE_CODE_FLAGSTYPE_OBJFILE (type) == TYPE_OBJFILE (storage)TYPE_OBJFILE (*typeptr) == TYPE_OBJFILE (type)code == TYPE_CODE_STRUCT || code == TYPE_CODE_UNIONfloatformats[0] != NULL && floatformats[1] != NULL!(flags & (TYPE_FLAG_MIN - 1))TYPE_OBJFILE (type) == objfileUnexpected type field location kind: %d[%d] bitpos %d bitsize %d type virtual_field_bits (%d bits at *private_field_bits (%d bits at *protected_field_bits (%d bits at *This context has class, struct or union %s, not an enum.This context has class, struct or enum %s, not a union.This context has class, union or enum %s, not a struct.------ Arg is %s [%d], parm is %s [%d] Invalid anonymous type %s [in module %s], GCC PR debug/47510 bug?Type %s is not a structure or union type.Type %s has no component named %s.Internal: Cannot demangle mangled name `%s'.Unknown address space specifier: "%s"overloadopaque-type-resolutionShow strict type checking.Set strict type checking.Strict type checking is %s. gdbtypes.cbitpos < TYPE_NFIELDS (type)bitpos >= 0floatformats != NULLbit >= 0__CORE_ADDRTYPE_OBJFILE_OWNED (type)type node tagname '%s' (code 0x%x (TYPE_CODE_UNDEF)(TYPE_CODE_PTR)(TYPE_CODE_ARRAY)(TYPE_CODE_STRUCT)(TYPE_CODE_UNION)(TYPE_CODE_ENUM)(TYPE_CODE_FLAGS)(TYPE_CODE_FUNC)(TYPE_CODE_INT)(TYPE_CODE_FLT)(TYPE_CODE_VOID)(TYPE_CODE_SET)(TYPE_CODE_RANGE)(TYPE_CODE_STRING)(TYPE_CODE_ERROR)(TYPE_CODE_MEMBERPTR)(TYPE_CODE_METHODPTR)(TYPE_CODE_METHOD)(TYPE_CODE_REF)(TYPE_CODE_CHAR)(TYPE_CODE_BOOL)(TYPE_CODE_COMPLEX)(TYPE_CODE_TYPEDEF)(TYPE_CODE_NAMESPACE)(UNKNOWN TYPE CODE)objfile gdbarch target_type pointer_type reference_type type_chain instance_flags 0x%x TYPE_FLAG_CONST TYPE_FLAG_VOLATILE TYPE_FLAG_CODE_SPACE TYPE_FLAG_DATA_SPACE TYPE_FLAG_ADDRESS_CLASS_1 TYPE_FLAG_ADDRESS_CLASS_2 TYPE_FLAG_RESTRICT TYPE_FLAG_UNSIGNED TYPE_FLAG_NOSIGN TYPE_FLAG_STUB TYPE_FLAG_TARGET_STUB TYPE_FLAG_STATIC TYPE_FLAG_PROTOTYPED TYPE_FLAG_INCOMPLETE TYPE_FLAG_VARARGS TYPE_FLAG_VECTOR TYPE_FIXED_INSTANCE TYPE_STUB_SUPPORTED TYPE_NOTTEXTnfields %d [%d] enumval %s type (undefined)low %s%s high %s%s vptr_basetype vptr_fieldno %d cplus_stuff n_baseclasses %d nfn_fields %d fn_fieldlists [%d] name '%s' () length %d [%d] physname '%s' (args fcontext is_const %d is_volatile %d is_private %d is_protected %d is_stub %d voffset %u gnat_stuff floatformat calling_convention %d No enum type named %s.No union type named %s.No struct type named %s.stub type has NULL namenparams == 0No template type named %s.No type named %s.double complex_Decimal32_Decimal64_Decimal128true characterint0_tuint8_tuint16_tuint32_tuint64_tuint128_tchar16_tchar32_t_ZX*kX*k<)k<)kа)k<)kА)k<)k<)k<)k<)k<)k<)k<)k<)k<)k<)k<)k<)k<)kX*kGJkXJkiJkzJkЛJkЬJkнJk╛Jk╧JkрJkёJkKkKk$Kk5KkFKkWKkhKkyKkКKkЫKkмKk╜Kk6Jk]VkPXkиXkрXk]Vk Wk]Vk╚YkYk0Yk]VkАYk Wk]Vk]Vk]Vk]Vk]Vk]Vk╨WkаVkиYk]Vk¤Yk]Vk]Vk]Vk@Xk@Xk]VkфYkEWk]Vk]Vk@Xk]Vk]Vk]Vk]Vk]Vk]Vk@Xk@Xkр`kа`kа`k`akа`kа`kа`kаakа`kа`kа`kа`kа`kа`k└ak└`kddd arch_composite_typeappend_flags_type_flagarch_float_typecopy_typecopy_type_recursiveinit_typemake_qualified_typereplace_typemake_cv_typelookup_function_type_with_argumentsalloc_type_archalloc_typeList the BFDs that are currently open.(sectp->flags & SEC_RELOC) == 0Can't read data for section '%s' in file '%s'bfdsRefcountrefcountgdb_bfd.csize != NULLdescriptor->data != NULLgdata->refc >= 1cannot close "%s": %sres == 0slot && !*slotgdata->archive_bfd == parentgdb_bfd_mark_parentgdb_bfd_map_sectiongdb_bfd_unreffree_one_bfd_sectiongdb_bfd_refgdb_bfd_openThe current OS ABI is "%s". The default OS ABI is "%s". osabi.cUpdating OS ABI failed.FreeBSDnon-Show OS ABI of target.Set OS ABI of target.osabinotesz <= MAX_NOTESZ.note.ABI-tagGNU.note.netbsd.identNetBSD.note.openbsd.identOpenBSD.note.netbsdcore.procinfoSVR4GNU/HurdSolarisOSF/1FreeBSD a.outFreeBSD ELFNetBSD a.outNetBSD ELFOpenBSD ELFWindows CEDJGPPIrixInterixHP/UX ELFHP/UX SOMQNX NeutrinoCygwinAIXDICOSDarwinSymbianOpenVMSLynxOS178NewlibThe current OS ABI is "auto" (currently "%s"). Invalid OS ABI "%s" passed to command handler.A handler for the OS ABI "%s" is not built into this configuration of GDB. Attempting to continue with the default %s settings. gdbarch_lookup_osabi: invalid OS ABI (%d) from sniffer for architecture %s flavour %dgdbarch_lookup_osabi: multiple %sspecific OS ABI match for architecture %s flavour %d: first match "%s", second match "%s"_initialize_gdb_osabi: gdb_osabi_names[] is inconsistentgdbarch_register_osabi: An attempt to register a handler for OS ABI "%s" for architecture %s was made. The handler will not be registeredgdbarch_register_osabi: A handler for OS ABI "%s" has already been registered for architecture %sgeneric_elf_osabi_sniff_abi_tag_sections: unknown OS number %dXСkPСk╕СkXСkyСkyСk╚СkyСkyСk╪СkyСkyСkyСkиСkЫkЫkЁЪk═ЪkЪЩkЖ(С?%ФD%ФM%ФU%Ф─Н[%Фi%Фu%ФВ%ФН%ФЩ%Фд%Фк%Фп%Ф╖%Ф┴%Ф╦%Ф╪%Ф▀%Фу%Фщ%ФЁ%Ф°%Ф&Ф &Ф ╔Сcheck_notegdbarch_register_osabiConditions for redistributing copies of GDB.Various kinds of warranty you do not have. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and TERMS AND CONDITIONS "This License" refers to version 3 of the GNU General Public License. "Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work. A "covered work" means either the unmodified Program or a work based To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means any non-source A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A "Major Component", in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding The Corresponding Source for a work in source code form is that All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices". c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, "normally used" refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. "Installation Information" for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. "Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's "contributor version". A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent sublicenses in a manner consistent with the requirements of Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to enforce a If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a SUCH DAMAGES. your programs, too. know their rights. modification follow. 0. Definitions. on the Program. 1. Source Code. form of a work. Source. same work. 2. Basic Permissions. makes it unnecessary. technological measures. parts of the aggregate. in one of these ways: with subsection 6b. modification has been made. been installed in ROM). 7. Additional Terms. 8. Termination. paragraph of section 11). your receipt of the notice. material under section 10. 11. Patents. this License. patent against the party. work and works based on it. combination as such. later version. Define attributes for memory region or reset memory region handling to target-based. Usage: mem auto mem [ ], where may be rw (read/write), ro (read-only) or wo (write-only), may be 8, 16, 32, or 64, and may be cache or nocacheEnable memory region. Arguments are the code numbers of the memory regions to enable. Usage: enable mem

...
Do "info mem" to see current list of code numbers.Disable memory region.
Arguments are the code numbers of the memory regions to disable.
Usage: disable mem ...
Do "info mem" to see current list of code numbers.Delete memory region.
Arguments are the code numbers of the memory regions to delete.
Usage: delete mem ...
Do "info mem" to see current list of code numbers.If on, and some memory map is defined, debugger will emit errors on
accesses to memory not defined in the memory map. If off, accesses to all
memory addresses will be allowed.Show handling of unknown memory regions.Set handling of unknown memory regions.Unknown memory addresses will be treated as inaccessible.
Unknown memory addresses will be treated as RAM.
Using memory regions provided by the target.
Using user-defined memory regions.
There are no memory regions defined.
Switching to manual control of memory regions; use "mem auto" to fetch regions from the target again.region bounds not 16 bit alignedregion bounds not 32 bit alignedregion bounds not 64 bit alignedinvalid memory region: low >= high
Memory region attributesMemory regions settingsset mem show mem  inaccessible-by-defaultNum Enb Low Addr   High Addr  Attrs %-3d %-3c	0x1000000000x10000000000000000rw wo flash blocksize 0x%x 8 16 32 64 nocache memattr.cNo memory region number %d.
Delete all memory regions? No mem 	no lo addressno hi addressnocacheunknown attribute: %soverlapping memory region
        VEC_mem_region_s_quick_pushVEC_mem_region_s_ordered_removeVEC_mem_region_s_indexVEC_mem_region_s_quick_insertSoftware breakpoints not implemented for this target.You can't do that when your target is `%s'Command not implemented for this target.Don't know how to %s.  Try "help target"."monitor" command not supported by this target.You can't do that without a process to debug.Cache use for stack accesses is %s.
Controlling the inferior in asynchronous mode is %s.
Mode for reading from readonly sections is %s.
target_fileio_readlink (%s) = %s (%d)
target_fileio_unlink (%s) = %d (%d)
target_fileio_close (%d) = %d (%d)
target_fileio_open (%s,0x%x,0%o) = %d (%d)
target_pid_to_exec_file (%d) = %s
target_has_exited (%d, %d, %d) = %d
target_remove_exec_catchpoint (%d) = %d
target_insert_exec_catchpoint (%d) = %d
target_remove_vfork_catchpoint (%d) = %d
target_insert_vfork_catchpoint (%d) = %d
target_remove_fork_catchpoint (%d) = %d
target_insert_fork_catchpoint (%d) = %d
target_terminal_info (%s, %d)
target_terminal_ours_for_output ()
target_stopped_by_watchpoint () = %ld
target_can_use_hw_breakpoint (%ld, %ld, %ld) = %ld
	While running this, GDB does not access memory from...
No saved terminal information.
target_remove_mask_watchpoint (%s, %s, %d) = %d
target_insert_mask_watchpoint (%s, %s, %d) = %d
target_region_ok_for_hw_watchpoint (%s, %ld) = %s
target_watchpoint_addr_within_range (%s, %s, %d) = %d
target_stopped_data_address ([%s]) = %ld
target_remove_hw_breakpoint (%s, xxx) = %ld
target_insert_hw_breakpoint (%s, xxx) = %ld
target_remove_breakpoint (%s, xxx) = %ld
target_insert_breakpoint (%s, xxx) = %ld
target_fileio_pread (%d,...,%d,%s) = %d (%d)
target_fileio_pwrite (%d,...,%d,%s) = %d (%d)
target_verify_memory (%s, %s) = %d
target_core_of_thread (%d) = %d
target_thread_alive (%d) = %d
target_post_startup_inferior (%d)
Writing to registers is not allowed (regno %d)target_wait (%d, status, options={%s}) = %d,   %s
May not interrupt or stop the target, ignoring attemptcould not find a target to attachThe "%s" target does not support "run".  Try "help target" or "continue".could not find a target to follow forkMagic number of %s target struct wrong
to_execution_direction must be implemented for reverse asynctarget_create_inferior (%s, %s, xxx, %d)
could not find a target to create inferiortarget file %s contained unexpected null characterstarget_thread_address_space (%s) = %d
Can't determine the current address space of thread %s
could not find a target to follow mourn inferiorcould not find a target to detachtarget_can_accel_watchpoint_condition (%s, %d, %d, %s) = %ld
target_remove_watchpoint (%s, %d, %d, %s) = %ld
target_insert_watchpoint (%s, %d, %d, %s) = %ld
target_xfer_memory (%s, xxx, %d, %s, xxx) = %dOverlapping regions in memory map: ignoringCannot find thread-local variables in this thread library.Cannot find shared library `%s' in dynamic linker's load module listCannot find executable file `%s' in dynamic linker's load module listThe inferior has not yet allocated storage for thread-local variables in
the shared library `%s'
for %sThe inferior has not yet allocated storage for thread-local variables in
the executable `%s'
for %sCannot find thread-local storage for %s, shared library %s:
%sCannot find thread-local storage for %s, executable file %s:
%sCannot find thread-local variables on this targettarget_thread_architecture (%s) = %s [%s]
Connect to a target machine or process.
The first argument is the type or protocol of the target machine.
Remaining arguments are interpreted by the target protocol.  For more
information on the arguments for a particular protocol, type
`help target ' followed by the protocol name.Argument required (target name).  Try `help target'
Attempt to unpush the dummy targetpop_all_targets couldn't find target %s
pop_target couldn't find target %s
When non-zero, target debugging is enabled.  Higher numbers are more
verbose.  Changes do not take effect until the next "run" or "target"
command.When this mode is on, memory reads from readonly sections (such as .text)
will be read from the object file instead of from the target.  This will
result in significant performance improvement for remote targets.Show mode for reading from readonly sections.Set mode for reading from readonly sections.Send a command to the remote monitor (remote targets only).Print the name of each layer of the internal target stack.Tells gdb whether to control the inferior in asynchronous mode.Show whether gdb controls the inferior in asynchronous mode.Set whether gdb controls the inferior in asynchronous mode.When on, use the data cache for all stack access, regardless of any
configured memory regions.  This improves remote performance significantly.
By default, caching for stack access is on.Show cache use for stack access.Set cache use for stack access.When this permission is on, GDB may write into the target's registers.
Otherwise, any sort of write attempt will result in an error.Show permission to write into registers.Set permission to write into registers.When this permission is on, GDB may write into the target's memory.
Otherwise, any sort of write attempt will result in an error.Show permission to write into target memory.Set permission to write into target memory.When this permission is on, GDB may insert breakpoints in the program.
Otherwise, any sort of insertion attempt will result in an error.Show permission to insert breakpoints in the target.Set permission to insert breakpoints in the target.When this permission is on, GDB may insert tracepoints in the program.
Otherwise, any sort of insertion attempt will result in an error.Show permission to insert tracepoints in the target.Set permission to insert tracepoints in the target.When this permission is on, GDB may insert fast tracepoints.
Otherwise, any sort of insertion attempt will result in an error.Show permission to insert fast tracepoints in the target.Set permission to insert fast tracepoints in the target.When this permission is on, GDB may interrupt/stop the target's execution.
Otherwise, any attempt to interrupt or stop will be ignored.Show permission to interrupt or signal the target.Set permission to interrupt or signal the target.Writing to flash memory forbidden in this contextWriting to memory is not allowed (addr %s, len %s)%s:target_xfer_partial (%d, %s, %s, %s, %s, %s) = %sobject != TARGET_OBJECT_MEMORYtarget object %d, annex %s, contained unexpected null charactersUnable to allocate memory to perform the search.Unable to access %s bytes of target memory at %s, halting search.target_search_memory (%s, ...)
file I/OTarget debugging is %s.
The current target stack is:
  - %s (%s)
target_rcmd (%s, ...)
target_find_new_threads ()
target_close (%d)
target_info_proc ("%s", %d)
target_flash_done
target_get_section_table ()
target_can_run () = %d
target_load (%s, %d)
target_terminal_save_ours ()
target_terminal_ours ()
target_terminal_inferior ()
target_terminal_init ()
target_files_info (xxx)
target_prepare_to_store ()
target_post_attach (%d)
target_open (%s, %d)
target_kill ()
Symbols from "%s".
target_store_registerstarget_fetch_registersTARGET_WNOHANGstatus->kind = %sexited, status = %d%sstopped, signal = %s%ssignalled, signal = %s%sloaded%sforked%svforked%sexecd%svfork-done%sentered syscall%sexited syscall%sspurious%signore%sno-history%sno-resumed%sunknown???target_program_signals (%d, { })
target_pass_signals (%d, {May not remove breakpointsMay not insert breakpointstarget_attach (%s, %d)
No targets foundtarget_follow_fork (%d) = %d
process %dtarget_stop (%s)
aspacetarget_mourn_inferior ()
target_disconnect (%s, %d)
target_detach (%s, %d)
, bytes =target_flash_erase (%s, %s)
target_memory_map ()
TLS load module not foundtarget %starget target_resume (%d, %s, %s)
Program not killed.NoneShow target debugging.Set target debugging.trust-readonly-sectionstarget-stacktarget-asyncstack-cachemay-write-registersmay-write-memorymay-insert-breakpointsmay-insert-tracepointsmay-insert-fast-tracepointsmay-interruptlen <= oldlenops->to_xfer_partial != NULLget OS datakeep_len == pattern_len - 1  = %d
len <= sizeof (buf)└ўkрўk°k °k8°kP°kh°kА°kШ°k░°k╚°kр°kРўkиўktarget_thread_address_spacesimple_search_memoryget_target_memory_unsignedtarget_read_alloc_1target_xfer_partialmemory_xfer_partial_1read_memory_robustVEC_memory_read_result_s_quick_pushtarget_read_stringdefault_execution_directionWhen non-zero, the internal representation of expressions will be printed.When non-zero, expression parser tracing will be enabled.parse_completion && expout_tag_completion_type == TYPE_CODE_UNDEFelts[pos].opcode < OP_EXTENDED0unrecognized tp_ value in follow_typesparse_completion && expout_tag_completion_type == TYPE_CODE_UNDEF && expout_completion_name == NULL && expout_last_struct == -1tag == TYPE_CODE_UNION || tag == TYPE_CODE_STRUCT || tag == TYPE_CODE_CLASS || tag == TYPE_CODE_ENUMtp == tp_pointer || tp == tp_reference || tp == tp_const || tp == tp_volatile?error in operator_length_standardShow expression debugging.Set expression debugging.Show parser debugging.Set parser debugging.parserParser debugging is %s.
Expression debugging is %s.
parse.coplen > 0 Unknown FILE used.
type_stack.depthtype_stack.depth == 0%Lg%nexpression to computeJunk after end of expression.x^lТ]lТ]l`^lТ]lТ]lТ]lТ]lТ]lТ]lТ]l`^l`^l(^lТ]lТ]lТ]lТ]lТ]lТ]lТ]l`^lТ]lТ]l`^lТ]lТ]lТ]l`^l╚]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]l`^l`^lТ]lТ]lТ]lТ]lТ]lТ]lТ]lТ]l`^l`^lТ]lТ]lТ]l`^l`l╕alРalalalи`l└bl░blР`lbl@mlбll mlаmlбllбllбllбll░ml░ml╨llШnlШnlШnlmlml8nlml╨llpnl╨ll ml8nlиnlаmlкllкllкllаmlЁnlкllбllбllбllбllбllбllбllбllбllбllбll0ml0ml0ml0ml0ml0mlmlml0ml0mlml8nlnlnl└ml8nl@nlml8nl8nlhmlШnl╨ml0ml0mlк{lp|lP|l0|l|l|lк{lp|lp|l|l|lРi`llP]l░i@iА┴dexp_uses_objfileexp_iterateoperator_check_standardfollow_typespop_typelistpop_type_stackinsert_typemark_completion_tagmark_struct_expressionUnknown] = language.cwarnRange checking is "%s".
set check %-16s Use the %c%s language
show check case-sensitiveCurrent language:  %s
Range checking:    %s
Case sensitivity:  %s
local 	
!@#$%^&*()+=|~`}{[]"';:?/>.<,-internal error - unimplemented function unk_lang_value_print called.internal error - unimplemented function unk_lang_val_print called.internal error - unimplemented function unk_lang_print_type called.internal error - unimplemented function unk_lang_emit_char called.internal error - unimplemented function unk_lang_printstr called.internal error - unimplemented function unk_lang_printchar called.Attempted to parse an expression with unknown languageGetting a string is unsupported in this language.Unrecognized case-sensitive setting.Case sensitivity in name search is "auto; currently %s".
Case sensitivity in name search is "%s".
the current case sensitivity setting does not match the language.
Unrecognized range check setting.Range checking is "auto; currently %s".
the current range check setting does not match the language.
Unrecognized case-sensitive setting: "%s"Unrecognized range check setting: "%s""set check" must be followed by the name of a check subcommand.
Magic number of %s language struct wrong
Set the current source language.
The currently understood settings are:

local or auto    Automatic setting based on source file
Show the current source language.Set the status of the type/range checker.Show the status of the type/range checker.Show range checking.  (on/warn/off/auto)Set range checking.  (on/warn/off/auto)For Fortran the default is off; for other languages the default is on.Show case sensitivity in name search.  (on/off/auto)Set case sensitivity in name search.  (on/off/auto)The current source language is "auto; currently %s".
The current source language is "%s".
Couldn't find language `%s' in known languages list.Ў╜Ц цФ░ВlАДlРYl`Дl@Дl ДlДlP-tрГl└Гl╨╢c└Вlъ&СА┤f╨|f░Гl╨Вl╨ЄФаВlа┬fрВl└ДlРВlаДlzfчх
ДHЖ цФ░ВlАДlРYl`Дl@Дl ДlДlP-tрГl└Гl╨╢c└Вlъ&СА┤f╨|f░Гl╨Вl╨ЄФаВlа┬fрВl└ДlРВlаДlzfчх
╬чФ цФ░ВlАДlРYl`Дl@Дl ДlДlP-tрГl└Гl╨╢c└Вlъ&СА┤f╨|f░Гl╨Вl╨ЄФаВlа┬fрВl└ДlРВlаДlzfчх
Q╒Ет╒ЕДHЖQ╒Ет╒Е(чФДHЖ! pending_addrmapbuildsym.ccontext_stack_depth > 0Blocks in a type symtabMacro in a type symtabblock at %s out of orderContext stack not empty in augment_type_symtabLine numbers recorded in a type symtabblock end address less than block start address in %s (patched it)block end address %s less than block start address %s (patched it)inner block not inside outer block in %sinner block (%s-%s) not inside outer block (%s-%s)mainsub_alias != NULL && mainsub_alias != mainsubContext stack not empty in end_symtabbuildsym_initpop_contextwatch_main_source_file_lossagerestart_symtabSearch memory for a sequence of bytes.
Usage:
find [/size-char] [/max-count] start-address, end-address, expr1 [, expr2 ...]
find [/size-char] [/max-count] start-address, +length, expr1 [, expr2 ...]
size-char is one of b,h,w,g for 8,16,32,64 bit values respectively,
and if not specified the size is taken from the type of the expression
in the current language.
Note that this means for example that in the case of C-like languages
a search for an untyped 0x42 will search for "(int) 0x42"
which is typically four bytes.

The address of the last match is stored as the value of "$_".
Convenience variable "$numfound" is set to the number of matches.Invalid search space, end precedes start.Overflow in address range computation, choose smaller range.Search space too small to contain pattern.bits % 8 == 0findcmd.cMissing search parameters.Invalid size granularity.Empty search range.
Invalid length.Search space too large.Missing search pattern.numfoundPattern not found.
%d pattern%s found.
put_bitsStandard register ``$ps'' is not available for this targetStandard register ``$sp'' is not available for this targetSignal 0HangupInterruptQuitIllegal instructionTrace/breakpoint trapAbortedSIGEMTEmulation trapArithmetic exceptionKilledBus errorSegmentation faultBad system callBroken pipeAlarm clockTerminatedUrgent I/O conditionStopped (signal)Stopped (user)ContinuedChild status changedStopped (tty input)Stopped (tty output)I/O possibleCPU time limit exceededFile size limit exceededVirtual timer expiredProfiling timer expiredWindow size changedSIGLOSTResource lostUser defined signal 1User defined signal 2Power fail/restartPollable event occurredSIGWINDSIGPHONESIGWAITINGProcess's LWPs are blockedSIGLWPSignal LWPSIGDANGERSwap space dangerously lowSIGGRANTMonitor mode grantedSIGRETRACTSIGMSGMonitor mode data availableSIGSOUNDSound completedSIGSAKSecure attentionSIGPRIOSIG33Real-time event 33SIG34Real-time event 34SIG35Real-time event 35SIG36Real-time event 36SIG37Real-time event 37SIG38Real-time event 38SIG39Real-time event 39SIG40Real-time event 40SIG41Real-time event 41SIG42Real-time event 42SIG43Real-time event 43SIG44Real-time event 44SIG45Real-time event 45SIG46Real-time event 46SIG47Real-time event 47SIG48Real-time event 48SIG49Real-time event 49SIG50Real-time event 50SIG51Real-time event 51SIG52Real-time event 52SIG53Real-time event 53SIG54Real-time event 54SIG55Real-time event 55SIG56Real-time event 56SIG57Real-time event 57SIG58Real-time event 58SIG59Real-time event 59SIG60Real-time event 60SIG61Real-time event 61SIG62Real-time event 62SIG63Real-time event 63SIGCANCELLWP internal signalSIG32Real-time event 32SIG64Real-time event 64SIG65Real-time event 65SIG66Real-time event 66SIG67Real-time event 67SIG68Real-time event 68SIG69Real-time event 69SIG70Real-time event 70SIG71Real-time event 71SIG72Real-time event 72SIG73Real-time event 73SIG74Real-time event 74SIG75Real-time event 75SIG76Real-time event 76SIG77Real-time event 77SIG78Real-time event 78SIG79Real-time event 79SIG80Real-time event 80SIG81Real-time event 81SIG82Real-time event 82SIG83Real-time event 83SIG84Real-time event 84SIG85Real-time event 85SIG86Real-time event 86SIG87Real-time event 87SIG88Real-time event 88SIG89Real-time event 89SIG90Real-time event 90SIG91Real-time event 91SIG92Real-time event 92SIG93Real-time event 93SIG94Real-time event 94SIG95Real-time event 95SIG96Real-time event 96SIG97Real-time event 97SIG98Real-time event 98SIG99Real-time event 99SIG100Real-time event 100SIG101Real-time event 101SIG102Real-time event 102SIG103Real-time event 103SIG104Real-time event 104SIG105Real-time event 105SIG106Real-time event 106SIG107Real-time event 107SIG108Real-time event 108SIG109Real-time event 109SIG110Real-time event 110SIG111Real-time event 111SIG112Real-time event 112SIG113Real-time event 113SIG114Real-time event 114SIG115Real-time event 115SIG116Real-time event 116SIG117Real-time event 117SIG118Real-time event 118SIG119Real-time event 119SIG120Real-time event 120SIG121Real-time event 121SIG122Real-time event 122SIG123Real-time event 123SIG124Real-time event 124SIG125Real-time event 125SIG126Real-time event 126SIG127Real-time event 127Information requestUnknown signalEXC_BAD_ACCESSCould not access memoryEXC_BAD_INSTRUCTIONIllegal instruction/operandEXC_ARITHMETICEXC_EMULATIONEmulation instructionEXC_SOFTWARESoftware generated exceptionEXC_BREAKPOINTGDB_SIGNAL_MAGICЪ╝lА╛l0╛l ╛lp╛l`╛lР╜lk╝lА╜lp╜l`╜lP╜l@╜l0╜l ╜l╜l╜lЁ╝lр╝l╨╝l└╝l╛l╛l░╝lЁ╜lр╜l╨╜l└╜l░╜lk╝lа╜lP╛l@╛l░╝l╗+Жє∙ФI
Ж№∙ФY
Ж·Фi
Ж
·Фz
Ж·ФК
Ж&·ФЄ┐К<·ФD·ФK·Ф├
ЖZ·Ф╙
Жo·Ф│
Жv·Фї
ЖА·ФYЖУ·ФЖг·Ф(Жп·Ф9Ж╗·Ф╩Ж╞·ФЖЖ█·ФЧЖь·ФuЖ√·Ф·┐К√ФиЖ√Ф╣Ж.√Ф└КC√Ф┌ЖP√ФыЖh√Ф№ЖБ√ФЖЧ√Ф Жп√Ф├√Ф╦√Фф
Ж┘√ФЖя√ФIЖ№Ф8Ж№Ф0№Ф0№Ф8№Ф8№ФA№ФL№Фg№Фn№Фy№ФГ№ФЮ№Фз№Ф╝№Ф°Х╟№Ф╬№Фъ№Фє№Ф¤Ф
¤Ф¤Ф¤Ф#¤Ф)¤Ф<¤ФB¤ФU¤Ф[¤Фn¤Фt¤ФЗ¤ФН¤Фа¤Фж¤Ф╣¤Ф┐¤Ф╥¤Ф╪¤Фы¤Фё¤Ф■Ф
■Ф■Ф#■Ф6■Ф<■ФO■ФU■Фh■Фn■ФБ■ФЗ■ФЪ■Фа■Ф│■Ф╣■Ф╠■Ф╥■Фх■Фы■Ф■■Ф Ф Ф Ф0 Ф6 ФI ФO Фb Фh Ф{ ФБ ФФ ФЪ Фн Ф│ Ф╞ Ф╠ Ф▀ Фх Ф° Ф■ ФХХ*Х4ХHХNХaХgХzХАХУХЩХмХ▓Х┼Х╦Х▐ХфХўХ¤ХХХ)Х/ХBХHХ[ХaХtХzХНХУХжХмХ┐Х┼Х╪Х▐ХёХўХ
ХХ#Х)Х<ХBХUХ[ХnХtХЗХНХаХжХ╣Х┐Х╥Х╪ХыХёХХ
ХХ#Х6Х<ХOХUХhХnХБХЗХЪХаХ│Х╣Х╠Х╥ХхХьХХХХ"Х6Х=ХQХXХlХsХЗХОХвХйХ╜Х─Х╪Х▀ХєХ·ХХХ)Х0ХDХKХ_ХfХzХБХХХЬХ░Х╖Х╦Х╥ХцХэХХХХ#Х7Х>ХRХYХmХtХИХПХгХкХ╛Х┼Х╨вК┘ХэХХ№ХХ#Х7ХSХZ·ФbХpХЖХУХ░Х,С┐ХSignal %s does not exist on this system.GDB bug: target.c (gdb_signal_from_host): unrecognized real-time signalNeed to relinquish monitor modeInternal error: printing GDB_SIGNAL_DEFAULTLocal exec fileCan't create a corefile	`%s', file type %s.
	Entry point: %s
 - %s @ %s	
	Mapping info for file `%s'.
file(member)denddstartSection %s not foundexec.cNo executable file now.
File not changed.Use an executable file as a target.
Specify the filename of the executable file.Use FILE as program to be debugged.
It is read for its symbols, for getting the contents of pure memory,
and it is the program executed when you use the `run' command.
If FILE cannot be found as specified, your execution directory path
($PATH) is searched for a command of that name.
No arg means to have no executable file and no symbols.Use FILE as program for getting contents of pure memory.
If FILE cannot be found as specified, your execution directory path
is searched for a command of that name.
No arg means have no executable file.Change the base address of section SECTION of the exec file to ADDR.
This can be used if the exec file does not contain section addresses,
(such as in the a.out format), or when the addresses specified in the
file itself are wrong.  Each section must be changed separately.  The
``info files'' command lists all the sections and their addresses.Show writing into executable and core files.Set writing into executable and core files.Writing into executable and core files is %s.
Cannot find section for the entry point of %s.	  %*s   %*s   %*s   %*s %8.8s %s
	0x%s 0x%s 0x%s 0x%s %s%s%s%s
Must specify section name and its virtual address"%s": could not open as an executable file: %s"%s": not in executable format: %s"%s": can't find the file sections: %sA program is being debugged already.
Are you sure you want to change the file? No executable file name was specifiedVEC_mem_range_s_quick_pushStep program backward until it reaches the beginning of another source line.
Argument N means do this N times (or till program stops for another reason).Step program backward, proceeding through subroutine calls.
Like the "reverse-step" command as long as subroutine calls do not happen;
when they do, the call is treated as one instruction.
Argument N means do this N times (or till program stops for another reason).Step backward exactly one instruction.
Argument N means do this N times (or till program stops for another reason).Step backward one instruction, but proceed through called subroutines.
Argument N means do this N times (or till program stops for another reason).Continue program being debugged but run it in reverse.
If proceeding from breakpoint, a number N may be used as an argument,
which means to set the ignore count of that breakpoint to N - 1 (so that
the breakpoint won't break until the Nth time it is reached).Execute backward until just before selected stack frame is called.Set a bookmark in the program's execution history.
A bookmark represents a point in the execution history 
that can be returned to at a later point in the debug session.Status of user-settable bookmarks.
Bookmarks are user-settable markers representing a point in the 
execution history that can be returned to later in the same debug 
session.Delete a bookmark from the bookmark list.
Argument is a bookmark number or numbers,
 or no argument to delete all bookmarks.
Go to an earlier-bookmarked point in the program's execution history.
Argument is the bookmark number of a bookmark saved earlier by using 
the 'bookmark' command, or the special arguments:
  start (beginning of recording)
  end   (end of recording)
goto-bookmark: no bookmark found for '%s'.Already in reverse mode.  Use '%s' or 'set exec-dir forward'.rnibookmarksgoto-bookmarkUnbalanced quotes: %sNo bookmarks.Delete all bookmarks? No bookmark #%d.   %d       %s    '%s'
No bookmark #%d
No bookmarks.
target_get_bookmark failed.Saved bookmark %d at %s
(not applicable)
%3d%%
b < c->num_bucketsbcache.cstringi < c->unique_count  Cached '%s' statistics:
    Total object count:  %ld
    Unique object count: %lu
    Total object size:   %ld
    Unique object size:  %ld
    Max entry size:     %d
    Average entry size:     Median entry size:  %d
%3lu
    Percentage of duplicates, by count:     Percentage of duplicates, by size:      Total memory used by bcache, including overhead: %ld
    Percentage memory overhead:     Net memory savings:             Hash table size:           %3d
    Hash table expands:        %lu
    Hash table hashes:         %lu
    Half hash misses:          %lu
    Hash table population:         Median hash chain length:  %3d
    Average hash chain length:     Maximum hash chain length: %3d
print_bcache_statistics¤ ¤?А    ¤ ў ¤ ?	А¤  #√   @АY@section not foundobjfiles.cobjfile not foundobjfile && parentres != NULLi == map_size - 1map_size / 2 <= jsect1_addr <= sect2_addralloc_size == map_sizeso->objfile == NULL<>unlink_objfile: objfile already unlinkedput_objfile_before: before objfile not in listobjfile->separate_debug_objfile_link == NULLobjfile->separate_debug_objfile == NULLparent->separate_debug_objfile_backlink == NULLparent->separate_debug_objfile_link == NULLget_objfile_pspace_data (pspace)->objfiles_changed_p != 0(a->objfile->separate_debug_objfile_backlink == b->objfile) || (b->objfile->separate_debug_objfile_backlink == a->objfile)unexpected overlap between:
 (A) section `%s' from `%s' [%s, %s)
 (B) section `%s' from `%s' [%s, %s).
Will ignore section Bpspace_info->num_sections == 0debug_objfile->num_sections == bfd_count_sections (debug_objfile->obfd)Entry point address is not known.find_pc_sectionupdate_section_mapfilter_debuginfo_sectionspreferred_obj_sectionfilter_overlapping_sectionsqsort_cmpobjfile_relocatefree_all_objfilesfree_objfileadd_separate_debug_objfileobjfile_separate_debug_iterateobserver_notify_test_notification() called
observer_notify_tsv_modified() called
observer_notify_tsv_deleted() called
observer_notify_tsv_created() called
observer_notify_command_param_changed() called
observer_notify_gdb_datadir_changed() called
observer_notify_before_prompt() called
observer_notify_memory_changed() called
observer_notify_inferior_removed() called
observer_notify_inferior_exit() called
observer_notify_inferior_appeared() called
observer_notify_inferior_added() called
observer_notify_thread_ptid_changed() called
observer_notify_architecture_changed() called
observer_notify_traceframe_changed() called
observer_notify_breakpoint_modified() called
observer_notify_breakpoint_deleted() called
observer_notify_breakpoint_created() called
observer_notify_about_to_proceed() called
observer_notify_target_resumed() called
observer_notify_thread_stop_requested() called
observer_notify_thread_exit() called
observer_notify_new_thread() called
observer_notify_new_objfile() called
observer_notify_solib_unloaded() called
observer_notify_solib_loaded() called
observer_notify_record_changed() called
observer_notify_inferior_created() called
observer_notify_executable_changed() called
observer_notify_target_changed() called
observer_notify_normal_stop() called
When non-zero, observer debugging is enabled.Failed to detach observerShow observer debugging.Set observer debugging.Observer debugging is %s.
elf_gnu_ifunc_resolver_return_stop cannot be reached.elf_gnu_ifunc_resolver_stop cannot be reached.GDB cannot resolve STT_GNU_IFUNC symbol "%s" without the ELF support compiled in.GDB cannot resolve STT_GNU_IFUNC symbol at address %s without the ELF support compiled in.Installing %d minimal symbols of objfile %s.
minsyms.csection != NULLgcc_compiled.gcc2_compiled.__gnu_compiledlookup_minimal_symbol_by_pc_section_1 mЁm└mРmCommands for use by GDB maintainers.
Includes commands to dump specific internal GDB structures in
a human readable form, to cause GDB to deliberately dump core,
to test internal functions such as the C++/ObjC demangler, etc.Commands for showing internal info about the program being debugged.List the BFD sections of the exec and core files. 
Arguments may be any combination of:
	[one or more section names]
	ALLOC LOAD RELOC READONLY CODE DATA ROM CONSTRUCTOR
	HAS_CONTENTS NEVER_LOAD COFF_SHARED_LIBRARY IS_COMMON
Sections matching any argument will be listed (no argument
implies all sections).  In addition, the special argument
	ALLOBJ
lists all sections from all object files, including shared libraries.Maintenance command for printing GDB internal state.Set GDB internal variables used by the GDB maintainer.
Configure variables internal to GDB that aid in GDB's maintenanceShow GDB internal variables used by the GDB maintainer.
Configure variables internal to GDB that aid in GDB's maintenanceGet fatal error; make debugger dump its core.
GDB sets its handling of SIGQUIT back to SIG_DFL and then sends
itself a SIGQUIT signal.Give GDB an internal error.
Cause GDB to behave as if an internal error was detected.Give GDB an internal warning.
Cause GDB to behave as if an internal warning was reported.Demangle a C++/ObjC mangled name.
Call internal GDB demangler routine to demangle a C++ link name
and prints the result.Set the display of time usage.
If nonzero, will cause the execution time for each command to be
displayed, following the command's output.Set the display of space usage.
If nonzero, will cause the execution space for each command to be
displayed, following the command's output.Print a type chain for a given symbol.
For each node in a type chain, print the raw data for each member of
the type structure, and the interpretation of the data.Print statistics about internal gdb state.Print the internal architecture configuration.
Takes an optional file parameter.Translate a section name and address to a symbol.Deprecate a command.  Note that this is just in here so the 
testsuite can check the command deprecator. You probably shouldn't use this,
rather you should use the C function deprecate_cmd().  If you decide you 
want to use it: maintenance deprecate 'commandname' "replacement". The 
replacement is optional.Undeprecate a command.  Note that this is just in here so the 
testsuite can check the command deprecator. You probably shouldn't use this,
If you decide you want to use it: maintenance undeprecate 'commandname'When non-zero, this timeout is used instead of waiting forever for a target
to finish a low-level step or continue operation.  If the specified amount
of time passes without a response from the target, an error occurs.Can't find command '%s' to deprecate.
"maintenance undeprecate" takes an argument, 
the command you want to undeprecate.
"maintenance deprecate" takes an argument,
the command you want to deprecate, and optionally the replacement command
enclosed in quotes.
requires argument (address or section + address)Need to specify  and sect->the_bfd_section && sect->the_bfd_section->namesect->objfile && sect->objfile->name"maintenance space" takes a numeric argument.
"maintenance time" takes a numeric argument.
"maintenance demangle" takes an argument to demangle.
"maintenance set" must be followed by the name of a set command.
"maintenance print" must be followed by the name of a print command.
"maintenance info" must be followed by the name of an info command.
"maintenance" must be followed by the name of a maintenance command.
maintenance maintenancemaintenance info maintenance print maintenance set maintenance show dump-meinternal-warningtranslate-addressundeprecateShow watchdog timer.Set watchdog timer.watchdogWhen enabled GDB is profiled.Show internal profiling.Set internal profiling.profileInternal profiling is %s.
Watchdog timer is %s.
maint.cUnknown section %s.%s + %s in section %s of %s
%s + %s in section %s
%s + %s
no symbol at %s:%s
no symbol at %s
Can't demangle "%s"
Should GDB dump core? ->%s ALLOC LOAD RELOC READONLY CODE DATA ROM CONSTRUCTOR HAS_CONTENTS NEVER_LOAD COFF_SHARED_LIBRARY IS_COMMONExec file:
    `%s', ALLOBJ  Object file: %s
Core file:
maintenance_translate_addressThe current C++ demangling style is "%s".
Demangling of C++/ObjC names in disassembly listings is %s.
Demangling of encoded C++/ObjC names when displaying symbols is %s.
Unknown demangling style `%s'.
The currently understood settings are:

`%s' style demangling chosen as the default.Show demangling of encoded C++/ObjC names when displaying symbols.Set demangling of encoded C++/ObjC names when displaying symbols.Show demangling of C++/ObjC names in disassembly listings.Set demangling of C++/ObjC names in disassembly listings.Use `set demangle-style' without arguments for a list of demangling styles.Show the current C++ demangling style.Set the current C++ demangling style.%-10s %s
asm-demangledemangle-stylefunction `%s' appears to be defined outside of all compilation unitsbad string table offset in symbol %d"repeated" header file %s not previously seen, at symtab pos %dN_LBRAC/N_RBRAC symbol mismatch at symtab pos %dPremature end of file reading symbol tablemisplaced N_LBRAC entry; discarding local symbols which have no enclosing blockblock start larger than block endunmatched N_LBRAC before symtab pos %dPsymtab for %s already read in.  Shouldn't happen.
First symbol in segment of executable not a source symbolstring table offset backs up at %dN_BINCL %s not in entries for any file, at symtab pos %dunknown symbol descriptor `%c'stabsect_build_psymtabs:  Found stabs (%s), but not string section (%s)Can't find %s section in symbol fileridiculous string table size: %d bytesCan't find any code sections in symbol fileCan't find .text section in symbol fileridiculous string table size (%d bytes).unknown symbol type %sdbxread.c__DYNAMICstabsReading in symbols for %s...somcoffepoc-penlmЁ`m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]mЁ`mp]m`]mam`]mam`]m╨cm`]m╨cm`]m@dm`]m╨cm`]m`]m`]m`]m`]mp]m`]mp]m`]m`]m`]mР^m`]m`]m`]m`dm`]m`]m`]mp]m`]m`]m`]mРdm`]mЁ^m`]m╨^m`]mp]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]mp]m`]mР^m`]mб_m`]m`]m`]m`]m`]m`]m`]mР^m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]mp]m`]mШam`]mИbm`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]mp]m`]m└bm`]mрbm`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m cm`]m`cm`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]mР^m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m╨]m`]mЁdm`]mem`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]m`]mp]mА~mP{mP{mЗ{m@|m`{m@~m~m└}m└}mP{mP{m@|m╥zm╥zm╥zm╥zm╥zm╥zm╥zmP{mP{mP{mP{mP{mP{mP{mP{mP{m└}m╥zm@|m@Бm╥zmP{m╥zm@Бm╥zm@Бm╥zm@Бm╥zmP{m╥zm@Бm╥zm╥zm╥zm@Бm╥zmP{m╥zm╥zm╥zm╥zm╥zmP{m╥zm╥zm╥zmP{m╥zm╥zm╥zmP{m╥zm@Бm╥zmP{m╥zmP{m╥zmP{m╥zmP{m╥zm╥zm╥zm╥zm╥zmP{m╥zm╥zm╥zmP{m╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zmP{m╥zm╪m╥zm╨~m╥zm╥zm╥zm╥zm╥zm╥zm╥zmP{m╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm@Бm╥zm`Аm╥zm}m╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zmP{m╥zmP{m╥zmP{m╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zmP{m╥zm╕{m╥zm@Бm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zmP{m╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zm╥zmP{m╥zmP{m╥zmP{m╥zm╥zm╥zmP{m╥zm╥zm╥zm╥zm╥zm╥zm╥zm@|m`{mP{m~mP{m└}m@Бm╥zm@Бm╥zm╥zm╥zm╥zm╥zmP{mP{mоБmоБmоБmоБmP{mоБmоБmоБmоБmP{mоБmоБmP{mP{mP{mP{mP{mP{mP{mP{mP{mP{mP{mоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmКmBЛmоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmЗmИЗmоБmP{mоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmоБm{mоБmоБmЙmоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmоБmЁКmА[m░аm╨Сm0TmЁGg└Fg░*gрЩТprocess_one_symbolSymbol table entry for %s has bad tagndx value`.bf' symbol %d has no aux entryBad coff function information.`.ef' symbol without matching `.bf' symbol ignored starting at symnum %dUnmatched .ef symbol(s) ignored starting at symnum %d`.ef' symbol %d has no aux entryLine number pointer %ld lower than start of line numbers`.eb' symbol without matching `.bb' symbol ignored starting at symnum %dMismatched .eb symbol ignored starting at symnum %dThe debugging information in `%s' is corrupted.
The file has a `.stabs' section, but no `.stabstr' section."%s": error reading line numbers.coffread.c%s: error reading symbolsUnexpected type for symbol %sBad n_sclass for symbol %scoff file name too longLI%LF%LC%LP%LPB%LBB%LBE%LPBX%.bf.ef.bb.eb"%s": can't get string tablek│mk│m╓╡mч╡m°╡m^┤m{┤mf╡mМ┤m·┤mw╡mD│m╢m	╢mM┤m+╢m┼╡mPеmрйmА┴mРеmЁGg└Fg░*gрЩТpзmWhen set, debugging messages for coff reading of exported symbols are displayed.Coff PE read debugging is %s.
Unable to find function "%s" in dll "%s", forward of "%s" in dll "%s"
Adding forwarded exported symbol "%s" in dll "%s", pointing to "%s"
Unknown section type for "%s" for entry "%s" in dll "%s"
Adding exported symbol "%s" in dll "%s"
Export RVA for dll "%s" is in section "%s"
Wrong value of export RVA for dll "%s": 0x%lx instead of 0x%lx
DLL "%s" has %ld export entries, base=%ld
Export name "%s" ord. %lu, RVA 0x%lx in dll "%s" not handled
Finished reading "%s", exports %ld, forwards %ld, total %ld/%ld.
Show coff PE read debugging.Set coff PE read debugging.coff-pe-readpe-x86-64pei-x86-64pe-i386pei-i386pe-arm-wince-littlepei-arm-wince-little%s!%s.edatacoff-pe-read.cdwarf2_per_objfiledwarf2read.clow == highinvalid dwarf2 offset %u.gnu_debugaltlinkcould not read '%s': %sfile '%s' was not usable: %sDW_FORM_invalid form 0x%x in `%s'cu->per_cu != NULLbaton->per_cuunexpected sectionslot != NULLthis_cu->cu == NULLmissing .debug_line sectionGNU %d.%d.%dIntel(R) CDWARF 2undefinitionnon-zerocommand-linein-file.debug_macro.dwo.debug_macinfo.dwo.debug_macro.debug_macinfomissing %s section  Number of unread CUs: %d
_MOD_(*baton)->per_cumap != NULLlocation descriptionunsupported stack op: '%s'unsupported stack op: '%02x'DW_TAG_  parent at offset: 0x%x
  has children: %s
  attributes:
DW_AT_HP_block_indexDW_AT_    %s (%s) block: size %sexpression: size %salt ref address: constant: %ssection offset: %ssignatured type, offset: 0x%xflag: TRUEflag: FALSEdie != NULL  Children:maintenance set dwarf2 dwarf2maintenance show dwarf2 max-cache-agealways-disassembledwarf2-readdwarf2-diecheck-physnameuse-deprecated-index-sectionscouldn't data write to filepartial symbol informationDW_AT_locationTU%s.dwpDWP file not found: %s
DWP file found: %s
    %u CUs, %u TUs
virtual-dwo/%d-%d-%d-%dCreating virtual DWO: %s
Virtual DWO %s %s found: @%s
DWO file not found: %s
DWO file found: %s
DWO %s %s(%s) found: @%s
DWO %s %s(%s) not found
cu->abbrev_table == NULLsig_type != NULL! this_cu->is_debug_typescu->die_hash == NULL  offset 0x%x, dwo_id 0x%s
tu_group != NULL._cu == NULL! IS_TYPE_UNIT_GROUP (per_cu)per_cu->cu != NULLIS_TYPE_UNIT_GROUP (this_cu)mangled .debug_line section  %d TUs
  %d uniq abbrev tables
  %d symtab sharers
Done building psymtabs of %s
.gdb-indexCan't open `%s' for writing*slot == NULLtruncatesig_type->per_cu.cu != NULLIBM XL C for OpenCLinvalid pointer size %dcharacter(DW_ATE_GNU F77DW_STRING_IS_CANONICAL (attr)UNKNOWN_TYPEUNKNOWN_VALUE > constfile index out of rangedie_is_declaration (die, cu)GNU Fortran unsupported tag: '%s'! per_cu->is_debug_typesTag '%s' has no DW_AT_importtu_group->symtabs == NULLtarget_cu->objfile == objfilecommon block memberGNU Go ! cu->per_cu->is_debug_typestempl_func != NULLDW_AT_vtable_elem_locationdie->tag == DW_TAG_typedefunsupported accessibility %d__vfp__pfn__deltaresult != NULL.debug_info.zdebug_info.debug_abbrev.zdebug_abbrev.debug_line.zdebug_line.debug_loc.zdebug_loc.zdebug_macinfo.zdebug_macro.debug_str.zdebug_str.debug_ranges.zdebug_ranges.debug_types.zdebug_types.debug_addr.zdebug_addr.zdebug_frame.gdb_index.zgdb_index.debug_abbrev.dwo.zdebug_abbrev.dwo.debug_info.dwo.zdebug_info.dwo.debug_line.dwo.zdebug_line.dwo.debug_loc.dwo.zdebug_loc.dwo.zdebug_macinfo.dwo.zdebug_macro.dwo.debug_str.dwo.zdebug_str.dwo.debug_str_offsets.dwo.zdebug_str_offsets.dwo.debug_types.dwo.zdebug_types.dwo.debug_cu_index.zdebug_cu_index.debug_tu_index.zdebug_tu_indexindex < dwarf2_per_objfile->n_type_unitsindex < dwarf2_per_objfile->n_type_unit_groupssection->readin && section->buffer != NULLread_offset_1: bad switch [in module %s]read_address: bad switch, signed [in module %s]read_address: bad switch, unsigned [in module %s]Dwarf Error: could not find partial DIE containing offset 0x%lx [in module %s]dwarf2_per_objfile->all_comp_units[low-1]->offset.sect_off <= offset.sect_offoffset.sect_off < this_cu->offset.sect_off + this_cu->lengthDwarf Error: Could not find abbrev number %d [in module %s]could not find '.gnu_debugaltlink' sectioncould not read '.gnu_debugaltlink' section: %self_section_nr < dwp_file->num_sectionsstatement list doesn't fit in .debug_line section.debug_line section has line data without a fileunrecognized version `%d' in .debug_macro sectiondebug info runs off end of %s section [in module %s]macro definition contains spaces in formal argument list:
`%s'macro debug info contains a malformed macro definition:
`%s'invalid attribute class or form for '%s' in '%s'location expression too complexunsupported die ref attribute form: '%s'Attribute value is not a constant (%s)A problem internal to GDB: DIE 0x%x has type already setunrecognized DW_MACFINO opcode 0x%xDwarf Error: Can't read DWARF data from '%s'Dwarf Error: unsupported DWP file version (%u) [in module %s]Dwarf Error: number of slots in DWP hash table (%u) is not power of 2 [in module %s]Dwarf Error: wrong version in compilation unit header (is %d, should be 2, 3, or 4) [in module %s]Dwarf Error: bad offset (0x%lx) in compilation unit header (offset 0x%lx + 6) [in module %s]Dwarf Error: bad length (0x%lx) in compilation unit header (offset 0x%lx + 0) [in module %s]DW_FORM_strp used without .debug_str section [in module %s]DW_FORM_strp pointing outside of .debug_str section [in module %s]DW_FORM_GNU_strp_alt used without .debug_str section [in module %s]DW_FORM_GNU_strp_alt pointing outside of .debug_str section [in module %s]DW_FORM_addr_index used without .debug_addr section [in module %s]DW_FORM_addr_index pointing outside of .debug_addr section [in module %s]missing `.debug_types' section for DW_FORM_ref_sig8 dieDwarf Error: %s found in non-DWO CU [in module %s]DW_FORM_str_index used without .debug_str.dwo section in CU at offset 0x%lx [in module %s]DW_FORM_str_index used without .debug_str_offsets.dwo section in CU at offset 0x%lx [in module %s]DW_FORM_str_index pointing outside of .debug_str_offsets.dwo section in CU at offset 0x%lx [in module %s]Offset from DW_FORM_str_index pointing outside of .debug_str.dwo section in CU at offset 0x%lx [in module %s]Dwarf Error: Cannot handle %s in DWARF reader [in module %s]Suspicious DW_AT_byte_size value treated as zero instead of %sDwarf Error: could not find abbrev number %d [in module %s]read_comp_unit_head: dwarf from non elf fileReading .debug_types%s for %s:
debug type entry at offset 0x%x is duplicate to the entry at offset 0x%x, signature 0x%s  offset 0x%x, signature 0x%s
Reading %s unit at offset 0x%x
missing .debug_line.dwo sectioncu_header->initial_length_size == 4 || cu_header->initial_length_size == 8 || cu_header->initial_length_size == 12intermixed 32-bit and 64-bit DWARF sectionsinvalid maximum_ops_per_instruction in `.debug_line' sectionline number info header doesn't fit in `.debug_line' sectionbad file number in macro information (%d)Skipping obsolete .gdb_index section in %s.Skipping deprecated .gdb_index section in %s.
Do "set use-deprecated-index-sections on" before the file is read
to use the section anyway.debug info with no main source gives macro %s on line %d: %sdebug info gives %s macro %s with %s line %d: %smacinfo_type == DW_MACRO_GNU_undef || macinfo_type == DW_MACRO_GNU_undef_indirect || macinfo_type == DW_MACRO_GNU_undef_indirect_altdebug info gives source %d included from %s at %s line %dmacro debug info has an unmatched `close_file' directiveno terminating 0-type entry for macros in `.debug_macinfo' sectionrecursive DW_MACRO_GNU_transparent_include in .debug_macro sectionconst value length mismatch for '%s', got %d, expected %dunsupported const value attribute form: '%s'Location list used without specifying the CU base address.location description stack overflowlocation description stack underflowDie: %s (abbrev %d, offset 0x%x)
constant ref: 0x%lx (adjusted)signatured type, offset: unknownstring: "%s" (%s canonicalized)unexpected attribute form: DW_FORM_indirectunsupported attribute form: %d. [not printed, max nesting level reached]
Symtab %s has objects from two different Go packages: %s and %sAda is not currently supported by the index((cu_index) & ~GDB_INDEX_CU_MASK) == 0(unsigned int) (is_static) <= 1(kind) >= GDB_INDEX_SYMBOL_KIND_TYPE && (kind) <= GDB_INDEX_SYMBOL_KIND_OTHERSet DWARF 2 specific variables.
Configure DWARF 2 variables such as the cache sizeShow DWARF 2 specific variables
Show DWARF 2 variables such as the cache sizeA higher limit means that cached compilation units will be stored
in memory longer, and more total memory will be used.  Zero disables
caching, which can slow down startup.Show the upper bound on the age of cached dwarf2 compilation units.Set the upper bound on the age of cached dwarf2 compilation units.When enabled, DWARF expressions are always printed in an assembly-like
syntax.  When disabled, expressions will be printed in a more
conversational style, when possible.Show whether `info address' always disassembles DWARF expressions.Set whether `info address' always disassembles DWARF expressions.When enabled, debugging messages are printed during dwarf2 reading
and symtab expansion.Show debugging of the dwarf2 reader.Set debugging of the dwarf2 reader.When enabled (non-zero), DIEs are dumped after they are read in.
The value is the maximum depth to print.Show debugging of the dwarf2 DIE reader.Set debugging of the dwarf2 DIE reader.When enabled, GDB's internal "physname" code is checked against
the demangler.Show cross-checking of "physname" code against demangler.Set cross-checking of "physname" code against demangler.When enabled, deprecated .gdb_index sections are used anyway.
Normally they are ignored either because of a missing feature or
performance issue.
Warning: This option must be enabled before gdb reads the file.Show whether to use deprecated gdb_index sections.Set whether to use deprecated gdb_index sections.Save a gdb-index file.
Usage: save gdb-index DIRECTORYWhether to check "physname" is %s.
Whether to always disassemble DWARF expressions is %s.
The upper bound on the age of cached dwarf2 compilation units is %s.
iter - &dwarf2_per_objfile->all_type_units[0] == dwarf2_per_objfile->n_type_unitsignoring absolute DW_AT_siblingDW_AT_low_pc %s is zero for DIE at 0x%x [in module %s]DW_AT_low_pc %s is not < DW_AT_high_pc %s for DIE at 0x%x [in module %s]DW_TAG_typedef has childen - GCC PR debug/47510 bug - DIE at 0x%x [in module %s]malformed enumerator DIE ignoredcould not read '.gdb_index' section from %s; skippingReading %s %u/0x%s in DWP file: %s
Dwarf Error: bad DWP hash table, section number too large [in module %s]Dwarf Error: bad DWP hash table, invalid section found [in module %s]Dwarf Error: bad DWP hash table, missing DWO sections [in module %s]Dwarf Error: bad DWP hash table, too many DWO sections [in module %s]Using existing virtual DWO: %s
Dwarf Error: bad DWP hash table, lookup didn't terminate [in module %s]Reading .debug_info.dwo for %s:
Could not find DWO CU referenced by CU at offset 0x%x [in module %s]sig_type->signature == signaturesig_type->type_offset_in_tu.cu_off == type_offset_in_tu.cu_offthis_cu->offset.sect_off == cu->header.offset.sect_offthis_cu->length == get_cu_length (&cu->header)cu->header.abbrev_offset.sect_off == abbrev_table->offset.sect_offDwarf Error: compilation unit with DW_AT_GNU_dwo_name has children (offset 0x%x) [in module %s]Dwarf Error: missing dwo_id [in module %s]Dwarf Error: CU at offset 0x%x references unknown DWO with ID %s [in module %s]dwo_unit->offset.sect_off == cu->header.offset.sect_offdwarf2_per_objfile->reading_partial_symbolsDwarf Error: Cannot find DIE at 0x%x referenced from DIE at 0x%x [in module %s]Dwarf Error: debug entry at offset 0x%x is missing its dwo_id [in module %s]debug entry at offset 0x%x is duplicate to the entry at offset 0x%x, dwo_id 0x%s [in module %s]Offset %d out of bounds for DW_AT_ranges attributeInvalid .debug_ranges data (no base address)Invalid .debug_ranges data (inverted range).debug_ranges entry has start address of zero [in module %s]dwarf2_per_objfile->ranges.readinOffset %lu out of bounds for DW_AT_ranges attributeDwarf Error: Cannot find DIE at 0x%x referenced in module %sDwarf Error: DIE at 0x%x referenced in module %s is neither DW_FORM_block* nor DW_FORM_exprlocDwarf Error: Type Unit at offset 0x%lx contains external reference to offset 0x%lx [in module %s].
could not find partial DIE 0x%x in cache [from module %s]
unhandled containing DIE tag %d for DIE at %d.debug_line section has line program sequence without an end.debug_line address at offset 0x%lx is 0 [in module %s]Building psymtabs of objfile %s ...
dwarf2_per_objfile->type_unit_groups == NULLBuilding type unit groups ...
iter - &dwarf2_per_objfile->all_type_unit_groups[0] == dwarf2_per_objfile->n_type_unit_groupsDone building type unit groups:
  %d symtabs from stmt_list entries
  %d type units without a stmt_list
usage: save gdb-index DIRECTORYCannot use an index to create the indexCannot make an index when the file has multiple .debug_types sectionsobstack_object_size (&contents) == size_of_contentsError while writing index for `%s': Dwarf Error: Cannot find signatured DIE referenced from DIE at 0x%x [in module %s]sig_type->type_offset_in_section.sect_off != 0Dwarf Error: Cannot find signatured DIE at 0x%x referenced from DIE at 0x%x [in module %s]Dwarf Error: Expected reference attribute [in module %s](type_flags & ~TYPE_INSTANCE_FLAG_ADDRESS_CLASS_ALL) == 0Self-referential DW_TAG_typedef - DIE at 0x%x [in module %s]Missing DW_AT_lower_bound - DIE at 0x%x [in module %s]DW_AT_name missing from DW_TAG_base_typeunsupported DW_AT_encoding: '%s'DW_TAG_module has no name, offset 0x%xunexpected tag in read_type_die: '%s'sig_type->per_cu.is_debug_typesDwarf Error: Bad type attribute %s [in module %s]Dwarf Error: Problem turning containing type into gdb type [in module %s]DW_AT_byte_size for array type smaller than the total size of elementstemplate param type '%s' defined within parent '%s'template parameter missing DW_AT_typetemplate parameter missing DW_AT_const_valueComputed physname <%s> does not match demangled <%s> (from linkage <%s>) - DIE at 0x%x [in module %s]SYMBOL_CLASS (sym) == LOC_OPTIMIZED_OUTDwarf Error: DW_TAG_imported_unit is not supported in type units [in module %s]Psymtab for %s unit @0x%x: %s - %s, %d global, %d static syms
child DW_TAG_imported_declaration expected - DIE at 0x%x [in module %s]child DW_TAG_imported_declaration has unknown imported name - DIE at 0x%x [in module %s]missing DW_AT_low_pc for DW_TAG_GNU_call_site DIE 0x%x [in module %s]Duplicate PC %s for DW_TAG_GNU_call_site DIE 0x%x [in module %s]Tag %d is not DW_TAG_GNU_call_site_parameter in DW_TAG_GNU_call_site child DIE 0x%x [in module %s]TYPE_CODE (func_type) == TYPE_CODE_FUNCCannot find function owning DW_TAG_GNU_call_site DIE 0x%x [in module %s]DW_AT_GNU_call_site_target target DIE has invalid physname, for referencing DIE 0x%x [in module %s]DW_AT_GNU_call_site_target target DIE has invalid low pc, for referencing DIE 0x%x [in module %s]call_site->parameter_count < nparamsNo DW_FORM_block* DW_AT_location for DW_TAG_GNU_call_site child DIE 0x%x [in module %s]Only single DW_OP_reg or DW_OP_fbreg is supported for DW_FORM_block* DW_AT_location is supported for DW_TAG_GNU_call_site child DIE 0x%x [in module %s]No DW_FORM_block* DW_AT_GNU_call_site_value for DW_TAG_GNU_call_site child DIE 0x%x [in module %s]No DW_FORM_block* DW_AT_GNU_call_site_data_value for DW_TAG_GNU_call_site child DIE 0x%x [in module %s]Variable in common block has DW_AT_data_member_location - DIE at 0x%x [in module %s]attr_form_is_block (common_loc)attr_form_is_block (member_loc) || attr_form_is_constant (member_loc)ptr - baton->data == baton->sizeTag '%s' has unexpected childrenDW_TAG_GNU_call_site DW_AT_GNU_call_site_target is neither block nor reference, for DIE 0x%x [in module %s]DW_AT_abstract_origin offset is not in CU for DW_TAG_GNU_call_site child DIE 0x%x [in module %s]CU refers to both DW_AT_GNU_macros and DW_AT_macro_infomissing name for subprogram DIE at %dcannot get low and high bounds for subprogram DIE at %dDIE 0x%x and its abstract origin 0x%x have different tagsChild DIE 0x%x and its abstract origin 0x%x have different tagsChild DIE 0x%x and its abstract origin 0x%x have different parentsMultiple children of DIE 0x%x refer to DIE 0x%x as their abstract originunexpected member function in Ada typemember function type missing for '%s'Member function "%s" (offset %d) is virtual but the vtable offset is not specifiedunexpected virtuality in component of Ada typeunexpected member functions in Ada typevirtual function table pointer not found when defining class '%s'IBM(R) XL C/C++ Advanced Editionoffset.sect_off == sig_type->per_cu.offset.sect_offExpanding one or more symtabs of objfile %s ...
Expanding symtab of %s at offset 0x%x
Done expanding %s at offset 0x%x
Done expanding symtabs of %s.
bug: psymtab for %s is already read in.dwarf2_per_objfile->using_index(Internal error: pc %s in read in CU, but not in symtab.)Иnpn`nPn@n nаnnnn└
nШ
n└
n@
n@
n@
n@
n@
n@
n@
nШ
nаoш
oрo°o@o└o╨
oPo@
oаooрo╨?oрo8@ox@oAo`AooGoЫAo>Go>Go·fo·foШjo·foШjojo·fo·fo·fo·fo░io·fo·foшho·fo·fo·fo·fo·foШjo·fo·fo╕goШjo8go·fopio·fo·foаho·fo·foШjo╕go·fo·fo╕go·fo·foшhoшgo·fo·fo·fo·fo·fo`ho0hoаio·fo·fo·foшho·fo·fo·foШjo╚hoбtoбto@woбto@woбtoбtoбtoбtoбtoбtoбtoбtoбtoбtoбtoбtoбtoбto@woбtoбtowo@woбtoбtoбtoбtoбtoбtoбtoбtoбtowoбtoбtowoбtoбto└woШvoбtoбtoбtoбtoбtoHvoбtoбtoбtoбtoбtoРuoбtoбtoбto@wo@uo0{o0{o({o0{oH|o0{o0{o0{o0{o0{o0{o0{o0{o0{o0{o0{o0{o0{o0{o({o0{o0{o({o({o0{o0{o0{o0{o0{o0{o└|o0{o0{oP{o0{o0{oP{o0{o0{o({o0{o0{o0{o0{o0{o0{oР{o0{o0{o0{o0{o0{o({o0{o0{o0{o({o`{o0{o0{o0{o╘{oЁэmPрoКn@шoцo└^n└эm╨эmpхoрo0▀o`oрэmpсoАрoЁodw2_setupdw2_get_cudw2_get_primary_cudw2_get_file_namesinit_cutu_and_read_diesиpХ┤pХ┴pХ╧pХ▐pХъpХўpХqХЇhХqХчhХqХ,qХ7qХCqХQqХ`qХmqХ{qХЗqХйАМФqХЯАМвqХнqХfollow_die_offsetdwarf2_find_containing_comp_unitload_full_comp_unitload_full_comp_unit_reader╣qХ╦qХ▐qХюqХ qХrХ rХ/rХ╘hХ?rХ├hХSrХerХtrХДrХЫrХ│rХ─rХ╓rХцrХўrХsХdwarf2_locate_dwp_sectionsinit_cutu_and_read_dies_no_followfree_stack_comp_unitcreate_dwo_debug_info_hash_table_readercreate_debug_types_hash_tableVEC_dwarf2_section_info_def_quick_pushinit_cu_die_readerfree_heap_comp_unitdw2_get_file_names_readerread_checked_initial_length_and_offsetdw2_find_pc_sect_symtabdw2_instantiate_symtabload_cuload_full_type_unitread_signatured_typeread_signatured_type_readerhandle_DW_AT_stmt_listdwarf_decode_macro_bytessetup_type_unit_groupsread_func_scopenew_symbol_fulldwarf2_const_value_attrlookup_die_typefollow_die_sigVEC_dwarf2_per_cu_ptr_quick_pushread_tag_pointer_typedwarf2_symbol_mark_computedfill_in_loclist_batonVEC_symbolp_quick_pushanonymous_struct_prefixdwarf2_record_block_rangesread_call_site_scopeVEC_delayed_method_info_quick_pushdwarf2_add_typedefvtable_vptrprocess_enumeration_scopelookup_signatured_type_at_offsetmark_common_block_symbol_computedVEC_const_char_ptr_quick_pushdw2_map_symtabs_matching_filenamewrite_psymtabs_to_indexadd_index_entryVEC_offset_type_quick_pushadd_address_entry_workerVEC_offset_type_indexVEC_offset_type_replaceVEC_offset_type_truncatedump_die_1create_all_type_unitsbuild_type_unit_groupsbuild_type_psymtab_dependenciesbuild_type_psymtabs_readerload_partial_diesprocess_psymtab_comp_unitprocess_psymtab_comp_unit_readerdwarf2_get_section_info.dynsym.dynstrmipsread.cError reading symbol table: %spыo╨ъoРыoръoЁGg└Fg░*gрЩТunion struct enum invalid C++ abbreviation `%s'Unknown builtin type %dshort realstringptrlogical*1logical*2logical*4integer*1integer*2integer*4wcharlogical*8integer*8need a type namestabsread.c__base_ctor __base_dtor __deleting_dtorMethod has bad physname %s
FOOINVALID_CPLUSPLUS_ABBREVbad structure-type formatinvalid symbol name "%s"Bad stabs string '%s'eh_throwUnknown C++ symbol name `%s'struct/union type gets multiply defined: %s%sInvalid symbol data: common block within common blockcouldn't parse type; debugger out of date?Invalid symbol data: type number (%d,%d) out of range at symtab pos %d.GDB internal error: bad real_filenumforward-referenced types left unresolved, type code %d.ECOMM symbol unmatched by BCOMMregister number %d too large (max %d) in symbol %s%s: common block `%s' from global_sym_chain unresolvedInvalid (empty) method argumentsUnrecognized cross-reference type `%c'Prototyped function type didn't end arguments with `#':
%sinvalid (minimal) member type data format at symtab pos %d.base type %d of range type is not definedGDB internal error, type is NULL in stabsread.c.const/volatile indicator missing, got '%c'member function type missing, got '%c'Unknown virtual character `%c' for baseclassUnknown visibility `%c' for baseclassC++ abbreviated type name unknown at symtab pos %dUnknown visibility `%c' for fieldvirtual function table pointer not found when defining class `%s'╣■o╣■oyplp_p;p.p
ppЎp╥p▒pзpЭpУpЖpypXp7ppїp╤pнpгpp=p√p┌p╣pмpЛpjp`p<pЖp╙p┬
p┬
p p┬
pШp┬
pMp┬
p┬
pШp┬
p┬
pШpШpШpШpШpШpШpШpШpШp┬
p┬
p┬
p┬
p┬
p┬
pЛp┬
pp┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p+ptp┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
p┬
pгp¤p┬
p┬
p&pжp]p┬
p┬
p┬
pp┬
p┬
p┬
p┬
p┬
p┬
pёp╒p┬
p╒p┬
p┬
pzpН/pZ/pZ/pZ/pН/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pZ/pН/pZ/pm0p^0pO0p20p2Tp4Rp4Rp4Rp4Rp4Rp4Rp_Rp4Rp4Rp4Rp4Rp4Rp&Tp4Rp4Rp4Rp4Rp4Rp4Rp4Rp4Rp4Rp4Rp4Rp4Rp4Rp4RpTp4Rp_Rp]^p╖Sp╖Sp^pа]p╖Sp╖Sp╖Sp╖Sp╖Sp╖Sp╖Sp╖Sp
_p╖Sp_pг^pA\p╖Spр[p╖SpЪ[p╖Sp╖Sp╖Sp╖Sp╖Sp╖Sp╖Sp╖SpD[p╖Sp┐Zp╖Sp╖SpнXp╖Sp╖Sp╖Sp╖Sp╖Sp▀Rp╖Sp╖Sp╖SpиWp╖SpвVp▀Rp>Up╖SpЁTppatch_block_stabs_vptr$_vb$ pShow the current BFD target.Set the current BFD target.gnutargetGNUTARGETcore_target != NULLcorefile.cThe current BFD target is "%s".
Use FILE as core dump for examining memory and registers.
No arg means have no core file.  This command has been superseded by the
`target core' and `detach' commands.Use `set gnutarget auto' to specify automatic detection.Cannot access memory at address %sError accessing memory address %s: %s.No executable file specified.
Use the "file" or "exec-file" command.core file may not match specified executable file.exec file is newer than core file.core_file_command%s is invalid in this contextDW_OP_GNU_addr_indexDW_OP_call*DW_OP_GNU_push_tls_addressDW_OP_GNU_implicit_pointerDW_OP_call_frame_cfaDW_OP_fbregdwarf2expr.cDW_OP_regxDW_OP_implicit_valueDW_OP_stack_valueCan't be reached.result_val != NULLctx->recursion_depth >= 0Support for typed DWARF is not supported in this contextDWARF-2 expression error: `%s' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.DWARF expression error: ran off end of buffer reading leb128 valueDWARF expression error: ran off end of buffer reading uleb128 valueintegral type expected in DWARF expressiondwarf expression stack underflowAsked for position %d of stack, stack only has %d elements on it.Support for DW_OP_GNU_entry_value is unimplementedUnsupported address size in DWARF expressions: %d bitsno unsigned variant found for type, while evaluating DWARF expressionCould not find type for DW_OP_GNU_const_typeDW_OP_GNU_const_type has different sizes for type and dataDWARF expression error: ran off end of buffer reading sleb128 valueDWARF-2 expression error: Loop detected (%d).DWARF-2 expression error: DW_OP_reg operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.DW_OP_implicit_value: too few bytes available.DWARF-2 expression error: DW_OP_GNU_implicit_pointer is not allowed in frame contextNot implemented: computing frame base using explicit value operatorNot enough elements for DW_OP_swap.  Need 2, have %d.Not enough elements for DW_OP_rot.  Need 3, have %d.Incompatible types on DWARF stackno signed variant found for type, while evaluating DWARF expressionDWARF-2 expression error: DW_OP_GNU_uninit must always be the very last op.DW_OP_GNU_entry_value: too few bytes available.DWARF-2 expression error: DW_OP_GNU_entry_value is supported only for single DW_OP_reg* or for DW_OP_breg*(0)+DW_OP_deref*DW_OP_GNU_reinterpret has wrong sizeUnhandled dwarf expression opcode 0x%xctx->recursion_depth == old_recursion_depthhЗp^p^p@Жp^p(Жp°ЕpрЕp░ЕpШЕphЕpPЕp ЕpЁДp╚Дp░ДpiАpРpДpШГpГp^p╕Вp0Вp0Вp0Вp0Вp0Вp╕Вp╕Вp0Вp0Вp╕Вp0Вp0Вp0Вp0ВpАp0Вp0Вp0Вp0Вp0Вp0ВpВpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpшБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБpxБp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8Бp8БpаБpААppДp Дp@Жp^p■p^p`Мp(Мp^p^pМp╨ЛppЛp@Лp^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^p^pЛp^p^p^p^p^p^p^p^p^p^p^p^p^p^p^pаКp^p0Кp░Йp`ЙpЁИp@ЖpPИp^pPИpЁЗp└ЗpШЗp|ТprТphТpьСpтСp*Пp*Пp│СpйСp*ПpzСpСpjРp!Рp*ПpРpРpЁПp▐Пp╣ПpППpdwarf_expr_evalexecute_stack_opEntry values and tail call frames debugging is %s.
access outside bounds of object referenced via synthetic pointerdest_offset_bits % 8 == 0 || bit_count < 8bit_count <= 8 - dest_offset_bits % 8dwarf2_find_location_expression: Corrupted DWARF expression.Could not find the frame base for "%s".Unable to access DWARF register number %dDWARF operator %s cannot be translated to an agent expressionUnknown DWARF operator 0x%02x cannot be translated to an agent expressionUnrecognized DWARF opcode 0x%02x at %ldNo block found for address for symbol "%s".No function found for block for symbol "%s".Unexpected opcode after DW_OP_breg%u for symbol "%s".a variable at frame base reg $%s offset %s+%sa variable at offset %s from base reg $%sa thread-local variable at offset 0x%s in the thread-local storage for `%s' [%s-bit piece, offset %s bits]Corrupted DWARF2 expression for "%s".Corrupted DWARF expression for symbol "%s".DW_TAG_GNU_call_site resolving failed to find function name for address %sTYPE_CODE (type) == TYPE_CODE_FUNCTYPE_SPECIFIC_FIELD (type) == TYPE_SPECIFIC_FUNCWhen non-zero, the process of determining parameter values from function entry point and tail call frames will be printed.Show entry values and tail call frames debugging.Set entry values and tail call frames debugging.nbytes > 0 && nbytes <= sizeof (LONGEST)Can't do read-modify-write to update bitfield; containing word has been optimized outCan't do read-modify-write to update bitfield; containing word is unavailableUnable to write to DWARF register number %sShould not be able to create a lazy value with an enclosing typeUnable to access DWARF register number %sframe address is not available.cannot use offset on synthetic pointer to registerDW_AT_GNU_call_site_target is not specified at %s in %sDW_AT_GNU_call_site_target DWARF block resolving requires known frame which is currently not available at %s in %sCannot find function "%s" for a call site target at %s in %sCannot resolve DW_AT_GNU_call_site_data_valueInvalid use of DW_OP_GNU_implicit_pointerUnable to find function for PC %sresult->callers + result->callees < result->lengthhtab_find_slot (addr_hash, &call_site->pc, NO_INSERT) != NULLThere are no unambiguously determinable intermediate callers or callees between caller function "%s" at %s and callee function "%s" at %sDW_OP_GNU_entry_value resolving callee gdbarch %s (of %s (%s)) does not match caller gdbarch %sDW_OP_GNU_entry_value resolving requires caller of %s (%s)DW_OP_GNU_entry_value resolving expects callee %s at %s but the called frame is for %s at %sDW_OP_GNU_entry_value resolving has found function "%s" at %s can call itself via tail callsCannot find matching parameter at DW_TAG_GNU_call_site %s at %sctx->funcs == &dwarf_expr_ctx_funcsDWARF-2 expression error: DW_OP_GNU_entry_value is supported only for single DW_OP_reg* or for DW_OP_fbreg(*)Cannot translate DW_OP_implicit_value of %d bytesCannot translate empty pieces to agent expressionsExpression pieces exceed word size*source_offset_bits < 8dwarf2loc.cnbits > 0 && nbits <= 8dest_offset_bits + nbits <= 8(datum & ~mask) == 0bad debug_loc_kind  %*ld: %s %s [$%s] register %s [$%s] offset %s to %ld %s (bytes) size %s offset %s (bits) DIE %s offset %s [0x%s]> %d [0x%s]> [0x%s]> [$%s]<0>, and a variable in $%sthe constant %da complex DWARF expression:
an empty %s-byte piece [%s-byte piece]an empty %s-bit piecemulti-location:
  Base address %s  Range %s-%s: block.per_cu == per_cuinvalid location typeframefunc != NULLinvalid call site target kind %s(%s)tailcall: initial:tailcall: compare:tailcall: reduced: |No block found for addressNo function found for blockUnsupported size %d in %sinvalid labelвpвp╕бpабp вp вp лpРеpРеpРеpРеpЁкp╕кpАкpРйpXйp йpшиp░иpжp└еpРеpРеpРеpЁзpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpжpРеpРеpРеpРеp(жpРеpРеpРеpРеpРеpРеpШжpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжppжp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp╕зp`зp└еpржp@кpЁзpЁзpРеpРеp╚йpHеpАоpРеpРеp оpЁнpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеpРеppнpЁмpxмp╪лpPлpкpРеpкpHеpиphиp╨╣p╨╣pш║pА╣p║p║p`╬pШ═p@═p═pИ╠pЎ╠pч╓p|╓p▀╒pj╒pF╫pы ppЇppЇpд ppЇp pZ p5 p pы■p╞■pб■p|■pQ■p&■p■p■pЁ¤p╙¤p┴¤pп¤ppЇp+¤p¤p╒№p├№p▒№pЯ№pv№pX№pF№p4№p№pЎ√pф√p╥√p└√pъ·p│·pw·p@·p·p═∙pЙ∙pу°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°p╙°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pЫ°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°pu°p+°prўpўpЎpд ppЇpАЇppЇp─Їp─ЇpqpЇp╘qЎp`q@qpЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇppЇp╡Їp`▄p@єp`╛p ╗pЁqЁ█p└ЄpРЧp╕pPqloclist_describe_location ╝p╝pр╗pdwarf_expr_reg_to_entry_parameterfunc_addr_to_tail_call_listVEC_CORE_ADDR_quick_push Чp@└p0ЧpPЧpPЧp`Чp└p`┐ppЧpper_cu_dwarf_calldwarf2_compile_expr_to_axVEC_int_quick_pushaccess_memoryVEC_int_indexP╤p└├pР╨pА╨pP╛p`╨p └p@дp0яpЯp░╔p╨├p░├pР├pА▄pА├p└╗p░╝pindirect_pieced_valuecopy_bitwiseextract_bitsextract_bits_primitiveinsert_bitsdwarf_expr_push_dwarf_reg_entry_valuedwarf_expr_frame_basecall_site_find_chain_1chain_candidateVEC_call_sitep_indexVEC_call_sitep_quick_pushdwarf2_find_location_expressioncie_table->num_entries == 0dwarf2-frame.cUnsupported address sizearmccfde->cie != NULLCorrupt data in %s:%sfs->initial.regfde_table != NULLobjfile->section_offsetsfde_table->num_entries > 0Unknown CFI encountered.fde != NULLUnknown CFA rule.Unknown register rule.Unsupported encoding: DW_EH_PE_indirectInvalid or unsupported encodingFound a CIE when not expecting it.n < 1 || cie_table->entries[n - 1]->cie_pointer < cie->cie_pointerFound an FDE when not expecting it.Corrupt data in %s:%s; align 4 workaround apparently succeededCorrupt data in %s:%s; align 8 workaround apparently succeededskipping .eh_frame info of %s: %sskipping .debug_frame info of %s: %scan't compute CFA for this framecan't compute CFA for this frame: required registers or memory are unavailableincomplete CFI data; DW_CFA_restore unspecified
register %s (#%d) at %sbad CFI data; mismatched DW_CFA_restore_state at %sNot implemented: computing unwound register using explicit value operatorincomplete CFI data; unspecified registers (e.g., %s) at %sCould not compute CFA; needed to translate this expression╖
q└qаqАqHq╖
q╖
q╖
q╖
qXq8qq°qb%qL-q!-qЎ,q╦,qм,qБ,q4,qч+qc+q+qд*qV*q"*qэ)q└)q=)qЄ(qЭ(qw(q5(q╙'qa'q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q(%q├&qл&q+&q(9qИ9q░9qр9q°9q(9q8:qp:qа:qя8q╨:qX9q(:qdecode_frame_entry_1add_ciefind_cie8q;q`8q07q7qdwarf2_frame_cachedwarf2_frame_find_fdedwarf2_restore_rule@.qP8q░upАupPup upЁtp╨tpPxpаtp`Ц08q08q08q8q;q`8q07qcache->refc > 0dwarf2-frame-tailcall.cretval >= -1fi != NULLnext_levels >= 0next_frame != NULL*tailcall_cachep == NULLchain_levels < chain->lengthcache->chain_levels > 0next_levels == 0htab_find_slot (cache_htab, cache, NO_INSERT) != NULLnext_levels <= cache->chain_levels(*this_id).artificial_depth > 0this_frame != cache->next_bottom_frame`UvАAq@Gq░?q0?q`>qcache_unreftailcall_frame_sniffercache_findcache_refexisting_next_levelstailcall_frame_prev_registertailcall_frame_this_iddwarf2_tailcall_sniffer_firstcache_new_ref1pretended_chain_levelspretend_pcPARENTREP___XVN___XVwide_wide_characterada__tags__dispatch_tableP_BOUNDS___XUT___XUT___XVEada-lang.c___XVL___XD___XF____XPBad GNAT array descriptor___XVStail != NULL_%Lg_%Lg_%Lg_%Lg___XVU has no component named %sada__tags__interface_tagText: `%.*s'BINOP_IN_BOUNDSTERNOP_IN_RANGEOP_ATR_FIRSTOP_ATR_LASTOP_ATR_LENGTHOP_ATR_IMAGEOP_ATR_MAXOP_ATR_MINOP_ATR_MODULUSOP_ATR_POSOP_ATR_SIZEOP_ATR_TAGOP_ATR_VALUNOP_QUALUNOP_IN_RANGEOP_OTHERSOP_POSITIONALOP_DISCRETE_RANGEOP_AGGREGATEOP_CHOICES'range(%ld) .. '(others => LJM___XEshort_integerlong_long_integerlong_long_floatpositiveset ada show ada trust-PAD-over-XVScatch exceptioncatch exception unhandledcatch assertunexpected catchpoint type`%s' Ada exceptionall Ada exceptionsunhandled Ada exceptionsfailed Ada assertionse.full_nameid.full_nameadainitdata->exception_info != NULL^[agis]-.*\.ad[bs]$___clean[.$a-zA-Z0-9_]*$__%s___XRcancelledRequest to select 0 symbols![0] cancel
[%d] %s at %s:%d
'(%s) (enumeral)
[%d] %s in %s (enumeral)
[%d] %s at %s:?
[%d] %s (enumeral)
[%d] %s at ?
Multiple matches for %s
["%02x"]["%04x"]TK___adainvalid Ada operator name: %scode == TYPE_CODE_UNDEFunhandled exception-namefailed assertion_ada_%sraw_type != NULLTYPE_NAME (raw_type) != NULLUnknown lower bound, using 1.___XAwhich == 0 || which == 1%s___XVZada__tags__type_specific_dataexpanded_namecan't unpack arraydon't know bounds of arrayelement type of array unknowncannot slice a packed arrayInvalid operand to '%sunimplemented type attributeargument to 'VAL out of rangeaggregate apparently mangledUnknown component name: %s.Misplaced 'others' clauseNo definition found for %sCould not find a match for %sOadd"+"Osubtract"-"Omultiply"*"Odivide"/"Omod"mod"Orem"rem"Oexpon"**"Olt"<"Ole"<="Ogt">"Oge">="Oeq"="One"/="Oand"and"Oor"or"Oxor"xor"Oconcat"&"Oabs"abs"Onot"not"LB0UB0LB1UB1LB2UB2LB3UB3LB4UB4LB5UB5LB6UB6LB7UB7 	
!@#$%^&*()+=|~`}{[]";:?/,-constraint_errorprogram_errorstorage_errortasking_error__gnat_debug_raise_exception__gnat_unhandled_exception__gnat_raise_nodefer_with_msg/lib.*/libpthread\.so[.0-9]*$/lib.*/libpthread\.a$/lib.*/libc\.so[.0-9]*$/lib.*/libc\.a$___finalizer[.$a-zA-Z0-9_]*$or elseand thenabs 'access'sizeobject size is larger than varsize-limitCould not find operator name for opcodeUnexpected type in ada_discrete_type_low_bound.Unexpected type in ada_discrete_type_high_bound.'POS only defined on discrete typesenumeration value is invalid: can't find 'POSUnable to find field %s in struct %s.  AbortingInternal error: miscounted aggregate components.Bad GNAT array descriptor boundsTYPE_NFIELDS (index_desc_type) > 0invalid dimension number to '%sattempt to take bound of something that is not an arrayunexpected null name on descriptive typecould not understand bit size information on packed arrayType (null) is not a structure or union type is not a structure or union type has no component named Prefix command for changing Ada-specfic settingsGeneric command for showing Ada-specific settings.This is related to the encoding used by the GNAT compiler.  The debugger
should normally trust the contents of PAD types, but certain older versions
of GNAT have a bug that sometimes causes the information in the PAD type
to be incorrect.  Turning this setting "off" allows the debugger to
work around this bug.  It is always safe to turn this option "off", but
this incurs a slight performance penalty, so it is recommended to NOT change
this option to "off" unless necessary.Show whether an optimization trusting PAD types over XVS types is activatedEnable or disable an optimization trusting PAD types over XVS typesCatch Ada exceptions, when raised.
With an argument, catch only exceptions with the given name.Catch failed Ada assertions, when raised.
With an argument, catch only exceptions with the given name.failed to get exception name: %sError in testing exception condition:
long_integer (e) = long_integer (&standard.%s)long_integer (e) = long_integer (&%s)failed to reevaluate internal exception condition for catchpoint %d: %sYour Ada runtime appears to be missing some debugging information.
Cannot insert Ada exception catchpoint in this configuration.Symbol "%s" is not a function (class = %d)Unable to insert catchpoint.  Is this an Ada main program?Unable to insert catchpoint. Try to start the program first.Cannot insert Ada exception catchpoints in this configuration.unexpected catchpoint kind (%d)SYMBOL_CLASS (sym) == LOC_BLOCKcondition missing after `if' keywordCondition missing after `if' keyword"set ada" must be followed by the name of a setting.
Argument must be choice numberSelect no more than %d of the above[%d] %s at :%d
Cannot assign this kind of variant recordInvalid address for Ada main program name.Unknown upper bound, using %ld.could not find bounds information on packed arraycould not understand bounds information on packed arrayAttempt to extract a component of a value that is not a record.Invalid type size for `%s' detected: %d.Invalid type size for  detected: %d.record type with dynamic size is larger than varsize-limitBounds unavailable for null array pointer.attempt to do packed indexing of something other than a packed arraypacked array index %ld out of boundstoo many subscripts (%d expected)Fixed-point values must be assigned to fixed-point variablesunable to determine array boundscannot assign arrays of different lengthTYPE_CODE (type) == TYPE_CODE_ARRAYis_integral_type (TYPE_TARGET_TYPE (type))TYPE_CODE (value_type (val)) == TYPE_CODE_ARRAYis_integral_type (TYPE_TARGET_TYPE (value_type (val)))TYPE_LENGTH (TYPE_TARGET_TYPE (type)) > TYPE_LENGTH (TYPE_TARGET_TYPE (value_type (val)))Incompatible types in assignmentOperands of fixed-point addition must have the same typeOperands of fixed-point subtraction must have the same typesecond operand of %s must not be zero.Attempt to compare array with non-arrayUnexpected unresolved symbol, %s, during evaluationcannot subscript or call something of type `%s'cannot subscript or call a recordwrong number of subscripts; expecting %dAttempt to index or call something other than an array or functionMembership test incompletely implemented; always returns truethe 'length attribute applies only to array types'modulus must be applied to modular type'VAL only defined on discrete types'VAL requires integral argumentAttempt to dereference null array pointer.Undefined name, ambiguous name, or renaming used in component association: %s.Aggregates only allowed on the right of an assignmentLeft-hand side must be array or record.Invalid record component association.Index in component association out of bounds.Extra components in aggregate ignored.Internal error: bad aggregate clauseUnexpected operator during name resolution__gnat_debug_raise_assert_failuresystem__assertions__raise_assert_failureLq╙Kq╙KqLq╙Kq╙Kq╙KqLq╙Kq╙Kq╙Kq╙Kq╙Kq╙KqLqLq╪LqcLqcLq░LqcLqcLqcLqаLqcLqcLqcLqcLqcLqcLq░LqРLqNq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq╚Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq:Mq╚Mq:Mq:Mq:Mq:Mq:Mq:Mq:MqРNqШMqhMqhMqhMqhMqШMqШMqАMqhMqАMqАMqhMq░Mq░Mq(NqАMqXNq░MqhMqtiq0jqиiqЁiqtiqjqtiqtiqjqtiqtiqtiqjqЁq▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~q▐~qЁq▐~q▐~q▐~q▐~q▐~q▐~q▐~qq9q9q9q9q9q9q9q9q9q9q9q9qxqxq9q9q9q9q9qаБq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8Аq8АqРБq8Аq8Аq8Аq8Аq8Аq8Аq8АqАБqpБq`БqPБq@Бq0Бq БqБqБqЁАqрАq╨Аq└Аq░АqаАqРАqААqpАq`АqPАqшВq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq<Вq0ГqаВqXВqXВqXВqXВqаВqаВqpВqXВqpВqpВqXВqИВqИВq╕ВqpВqГqИВqXВqиДq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq│Гq╨ДqHЕq░Еq░Еq░Еq░Еq░Еq░Еq░Еq░Еq░Еq░Еq░ЕqhЖq└Жq ЗqАЗq0ДqДqАДqI2rXBrkAr-Cr-Cr-Cr-CrI2rI2r╒=r╒=r4Ar4Ar4Ar╧?r╧?rI2rI2rI2rI2rI2r╢6rI2rI2r?6rI2rI2rI2rI2rI2rI2rI2rI2rI2rI2rI2rI2rI2rO>rI2rI2rI2r>rI2rI2rI2rI2r#8rI2rI2rI2rя7rI2r╟9rI2rI2rI2rI2rI2rI2rr9r╒=rI2rИ3rI2rI2rI2rI2rI2rI2rK3rI2rI2rI2r ┤ЦJўzЦ?╣Ц@┴Цk?unhandled c_string_typeMalformed escape sequenceAddress %s out of boundsasm\x used with no following hex digits.\u used with no following hex digitsCould not convert character constant to target character setError reading string from inferior: %sTrying to read string with inappropriate type `%s'.Trying to read string with inappropriate type.фЕЗсЧы╖П
ш╖П	ХЄХБсЧ
щ╖Пт╖П	х╖П	m╕П
i╕П
oХ
▐lв
СРЧdлМИБЦЛ ОS¤Е
│тЕ
╞BЕ
:УИБЦFЛ О<CпМ=хЧ>S¤Е?щ╖П@Щ
РEЗБЦAeKЕCРi`llP]l░i@i╨sr╤Ч`XЦPЕ``5`РYlВrЁАr└ВrаvtWt║tр╡t╨╢cА┤f╨|f`UЦаВlа┬fPqr└ДlРВlP}rzfчх
eйТ`XЦPЕ``5`РYlВrЁАr└ВrаvtWt║tр╡t╨╢cЁдvъ&СА╪vP╦v`хВ@╚v`UЦаВlа┬f@pr└ДlеvP}rzfчх
/TЦ
`XЦPЕ``5`РYlВrЁАr└ВrаvtWt║tр╡t╨╢cА┤f╨|f`UЦаВlа┬fPqr└ДlРВlP}rzfчх
НHЖ`XЦPЕ``5`РYlВrЁАr└ВrаvtWt║tр╡t╨╢cА┤f╨|f`UЦаВlа┬fPqr└ДlРВlP}rzfчх
`ЛrпДrHЛrHЛrHЛrпДr`Лr`ЛrпДr Лr°КrпДrпДrпДrпДr░КrпДrhКrHЛrHЛrпДrпДrпДrпДrпДrЬДrпДrпДrпДrпДrпДrпДr0КrЁЙr╕ЙrxЙr@ЙrЙr╨ИrРИrPИrИr╪ЗrаЗrhЗr0ЗrЁЖr░ЖrpЖr0ЖrЁЕr░ЕrpЕr8ЕrЕr├╚Л`XЦPЕ``5`РYlВrЁАr└ВrаvtWtР▐tр╡t╨╢cъ&СА┤f╨|fЁЛr`ЦаВlа┬fPqr└ДlРВlP}rzfчх
фЕЗсЧы╖П
ш╖П	ХЄХБсЧ
щ╖Пт╖П	х╖П	m╕П
i╕П
oХ
▐lв
СРЧdлМИБЦЛ ОS¤Е
│тЕ
╞BЕ
:УЛ О<CпМ=хЧ>S¤Е?щ╖П@Щ
РEЗБЦAeKЕC_DmainD main__Class___init___vtbl___modctor___moddtor___ModuleInfo_unrecognized character type4_VOIDreal*8real*16complex*8complex*16complex*32fortranncЦ цФFap8aРYl`Рr└РrРr░ГtP-tшtр╡t╨╢cА╪v╨|fаdЦПrПrpУr└ДlРВlаДlzfчх
ИБЦИБЦFЛ ОЛ О<S¤Е
│тЕ
 <У
шД
ЗсЧхЪР
┌ЪР	ЁЪР=√ЪР	ЫР	)ЫР
3ЫР
=ЫР
GЫР
╣ЖМ?:УAll Objective-C selectors, or those matching REGEXP.All Objective-C classes, or those matching REGEXP.Ask an Objective-C object to print itself.The 'print-object' command requires an argument (an Objective-C object)Unable to locate _NSPrintForDebugger in child processobject returns null description