Version 0 # The version 0 module-info format is ('|' denotes the left margin): # | # | [] # | "" # | "" ["" [""]] # |# # Stanzas are delimited by non-indented lines, and continued with indented lines. # Comments start in the first column, or are preceded only by whitespace. # The []'s above are not literal, they delimit optional material. # There can be multiple lines. # is the name of the module without any .o extension, just # as the module name would be entered in /etc/modules.conf # is the base part of the string demanded by kerneld (eth, # scsi_hostadapter, etc.) # is an optional identifier to identify groups of similar # drivers, such as the non-scsi cdrom devices which are requested by # block-major-*; they are given an alias of "cdrom". # is a free-form string enclosed in quotes to describe # the module to a human reader # is an argument such as io or irq, as understood by the module # is a free-form description # is a regular expression which can be used to test the # validity of a user-entered string # is a default value. This should not be provided unless it is # almost always the correct value, and will not, say, hang a user's computer # if it is wrong # # Ideas for version 1 file format: # o Add long description, presumably including all known cards supported # by the module in question # o Sub-argument description, for arguments which have multiple parts # separated by commas, particularly ones which share code with boot-time # arguments. # o Optional architecture flag(?) # drivers/net directory 3c501 eth "3Com 3c501" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" 3c503 eth "3Com EtherLink II" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" xcvr "Transceiver (0 = BNC; 1 = AUI)" "[01]" 3c505 eth "3Com Etherlink Plus" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" 3c507 eth "3Com EtherLink16" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" 3c509 eth "3Com EtherLink III" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" 3c515 eth "3Com 3c515 Corkscrew" 3c59x eth "3Com 3c590/3c595/3c90x/3cx980" 82596 eth "Apricot 82596" #a2065 # eth # "Amiga Linux/68k A2065" ac3200 eth "Ansel Communications Model 3200" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" mem "Base shared memory address" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" acenic eth "Alteon AceNIC Gigabit" aironet4500_card eth "Aironet 4500 PCI-ISA-i365 wireless" airport eth "Apple Airport" arlan eth "Aironet Arlan 655" #apricot # eth # "Apricot 82596" # io "Base I/O address" "0x[0-9a-fA-F]+" # irq "IRQ level" "[0-9]+" #arcnet # arc # "ARCnet for IP driver" # io "Base I/O address" "0x[0-9a-fA-F]+" # irq "IRQ level" "[0-9]+" # shmem "Base shared memory address" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" #ariadne # eth # "Amiga Linux/m68k Ariadne" at1700 eth "Allied Telesis AT1700" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" #atarilance # eth # "Atari Linux/m68k VME Lance" # Not yet modularized #atp # atp # "Attached (pocket) ethernet adapter" cs89x0 eth "Crystal SemiconductorCS89[02]0" de4x5 eth "DE4x5, DE434, DE450, and DE500 DEC EtherWORKS" io "Base I/O address" "0x[0-9a-fA-F]+" de600 eth "D-Link DE-600 Ethernet pocket adapter" de620 eth "D-Link DE-620 Ethernet pocket adapter" depca eth "DEC DEPCA and EtherWORKS DE1xx, DE2xx, DE422" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" dgrs eth "Digi RightSwitch SE-4, SE-6" dma "Toggle DMA use" "[01]" spantree "Toggle Spantree" "[01]" hashexpire "Hash Expiration" ipaddr "List of four IP addresses" ipxnet "IPX network number" #dlci #dlci #"RFC 1490 Frame Relay protocol" dmfe eth "Davicom DM9102(A)/DM9132/DM9801 fast ethernet" dummy dummy "Placeholder device for intermittent links" e100 eth "Intel EtherExpress/100 driver" e1000 eth "Intel EtherExpress/1000 gigabit" e2100 eth "Cabletron E2100" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" mem "Base shared memory address" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" xcvr "Transceiver (0 = internal; 1 = external)" "[01]" eepro eth "EtherExpress Pro/10" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" eepro100 eth "Intel EtherExpress Pro 100B" eexpress eth "EtherExpress" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" epic100 eth "SMC 83c170 EPIC/100" eql eql "Load balancing for point-to-point network interfaces" es3210 eth "Racal-Interlan ES3210 EISA" eth16i eth "ICL EtherTeam 16i/32 EISA" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" ewrk3 eth "EtherWORKS 3: DE203, DE204, DE205" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" fmv18x eth "Fujitsu FMV-181/182/183/184" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" hamachi eth "A Packet Engines GNIC-II Gigabit" hp-plus eth "HP PCLAN/plus" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" hp eth "HP LAN" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" hp100 eth "HP10/100VG ANY LAN: J257x, 27248B, J2585" hp100_port "Base I/O address" "0x[0-9a-fA-F]+" #hydra # eth # "Amiga Linux/m68k Hydra" ibmtr tr "Shared-memory IBM Token Ring 16/4" io "Base I/O address" "0x[0-9a-fA-F]+" lance eth "AT1500, HP J2405A, most NE2100/clone" # NOT YET MODULARIZED! #lance32 # eth # "AMD PCnet32, PCnetPCI" lne390 eth "Mylex LNE390 EISA" natsemi eth "NatSemi DP83815 Fast Ethernet" mace eth "Apple MACE" myri_sbus eth "MyriCOM MyriNET SBUS" ne eth "NE1000, NE2000, and compatible" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" ne2k-pci eth "PCI NE2000 clones" ne3210 eth "Novell NE3210 EISA" ni5010 eth "MiCom-Interlan NI5010" ni52 eth "NI5210 Ethernet" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" memstart "Base shared memory address" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" memend "Address of end of shared memory" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+" ni65 eth "NI6510 Ethernet" olympic tr "IBM Olympic-based PCI roken ring" pcnet32 eth "AMD PCnet32" # not modularized #pi2 plip plip "Parallel Link Internet Protocal" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" #ppp # ppp # "Point-to-Point Protocol" # NOT YET MODULARIZED! #pt rtl8129 eth "RealTek RTL8129 Fast Ethernet" 8139too eth "RTL8139, SMC EZ Card Fast Ethernet" sis900 eth "SiS 900/7016 PCI Fast Ethernet" sk98lin eth "SysKonnect SK-98xx Gigabit" sdla sdla "Sangoma S502/S508" # NOT YET MODULARIZED! #seeq8005 # What's a seeq8005, anyway? From the comments in the file: # "seeq8005.c: A network driver for linux." No, really! # NOT YET MODULARIZED! #sk_g16 # eth # "Schneider & Koch (SK) G16" sktr tr "SysKonnect Token Ring ISA/PCI" # slhc is never loaded explicitly, only by dependencies #slip # sl # "Serial Link Internet Protocol" smc-ultra eth "SMC Ultra, SMC EtherEZ ISA" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" smc-ultra32 eth "SMC Ultra32 EISA" smc9194 eth "SMC 9000 series Ethernet" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" ifport "Interface: 0 auto, 1 TP, 2 AUI/BNC" "[012]" strip strip_proto "Starmode Radio IP" # Not a module, may never be? #sunlance # eth # "Linux/Sparc/Lance Ethernet" sunbmac eth "Sun BigMac Ethernet" sundance eth "Sundance ST201 Alta" sungem eth "Apple GMAC" sunhme eth "Sun Happy Meal Ethernet" sunqe eth "Sun Quad Ethernet" tg3 eth "Broadcom Tigon3" tlan eth "ThunderLAN" tulip eth "DEC 21040, most 21*40 Ethernet" io "Base I/O address" "0x[0-9a-fA-F]+" old_tulip eth "Older DEC 21040, most 21*40 Ethernet" io "Base I/O address" "0x[0-9a-fA-F]+" via-rhine eth "VIA VT86c100A Rhine-II PCI" wavelan eth "AT&T GIS WaveLAN transceiver" io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" wd eth "WD8003 and WD8013 `compatible' ethercards." io "Base I/O address" "0x[0-9a-fA-F]+" irq "IRQ level" "[0-9]+" mem "Base shared memory address" "0x[0-9a-fA-F]+" mem_end "Address of end of shared memory (if non-standard size)" "0x[0-9a-fA-F]+" wic wic "parallel port network driver" winbond eth "Compex RL100ATX-PCI" yellowfin eth "Packet Engines G-NIC PCI Gigabit" # NOT YET MODULARIZED! #znet # eth # drivers/scsi directory # XXX this needs to be put back #53c7,8xx #scsi_hostadapter #"Symbios/NCR 53c700 and 53c800 series" 3w-xxxx scsi_hostadapter "3ware Storage Controller" AM53C974 scsi_hostadapter "AM53/79C974 (PCscsi) driver" BusLogic scsi_hostadapter "BusLogic MultiMaster SCSI" NCR53c406a scsi_hostadapter "NCR53c406a-based SCSI" # not a module #a2091 #a3000 a100u2w scsi_hostadapter "Initio INI-9100UW" aha152x "ioport, irq, host scsiid" aacraid scsi_hostadapter "Adaptec AACRAID" advansys scsi_hostadapter "AdvanSys SCSI" aha152x scsi_hostadapter "Adaptec AHA-152x" aha152x "ioport, irq, host scsiid" aha1542 scsi_hostadapter "Adaptec AHA-154x and 631x-based" aha1740 scsi_hostadapter "Adaptec AHA-174x" aic7xxx scsi_hostadapter "Adaptec AHA-2740, 28xx, 29xx, 39xx" aic7xxx_new scsi_hostadapter "New Adaptec AHA-2740, 28xx, 29xx, 39xx" atp870u scsi_hostadapter "ACARD ATP870U PCI scsi controller" cciss scsi_hostadapter "Compaq Smart Array 5300 Controller" cpqarray scsi_hostadapter "Compaq Smart/2 RAID Controller" cpqfc scsi_hostadapter "Compaq FibreChannel Controller" DAC960 scsi_hostadapter "Mylex DAC960 RAID Controller" dmx319ld scsi_hostadapter "Domex DMX3191D" dtc scsi_hostadapter "DTC 3180/3280" # deprecated eata scsi_hostadapter "All DMA-capable DPT SCSI" # deprecated eata_dma scsi_hostadapter "All DMA-capable DPT SCSI (dma mode)" # deprecated #eata_pio # scsi_hostadapter # "All PIO-capable DPT SCSI" fcal scsi_hostadapter "Sun Enterprise Network Array (FC-AL)" # not a module # esp fdomain scsi_hostadapter "Future Domain TMC-16xx SCSI" g_NCR5380 scsi_hostadapter "NCR5380 (generic driver)" gdth scsi_hostadapter "ICP RAID Controller" # not a module # gvp11 i2o_block scsi "I2O Block driver" imm scsi_hostadapter "Iomega ZIP Plus" in2000 scsi_hostadapter "IN2000 SCSI" setup_string "ioport:addr" initio scsi_hostadapter "Initio SCSI" ips scsi_hostadapter "IBM ServeRAID" megaraid scsi_hostadapter "MegaRAID 418, 428, 438, 466, 762" ncr53c8xx scsi_hostadapter "Symbios/NCR 53C8xx" pas16 scsi_hostadapter "Pro Audio Spectrum/Studio 16" pci2000 scsi_hostadapter "PCI-2000 IntelliCache" pci2220i scsi_hostadapter "PCI-2220I EIDE RAID" pluto scsi_hostadapter "SparcSTORAGE Array" ppa scsi_hostadapter "IOMEGA VPI0/Parallel ZIP" imm scsi_hostadapter "IOMEGA VPI2/Parallel ZIP" pcd block-major-46 cdrom "Parallel-port IDE CDROM" psi240i scsi_hostadapter "PSI240I EIDE" qlogicfas scsi_hostadapter "Qlogic FAS408 SCSI" # XXX fixme - need space #qlogicfc # scsi_hostadapter # "Qlogic ISP2x00 SCSI" qla1280 scsi_hostadapter "Qlogic 1280" qla2x00 scsi_hostadapter "Qlogic 2x00" qlogicisp scsi_hostadapter "QLogic ISP1020 SCSI" qlogicpti scsi_hostadapter "QLogic ISP1020 SCSI SBUS" #scsi # Can kerneld actually request this? # scsi # "SCSI Protocol support (midlevel driver)" #sd # block-major-8 sd # "SCSI disk protocol" seagate scsi_hostadapter "Seagate ST-01/02, Future Domain TMC-8xx" #sg # char-major-21 sg # "SCSI generic driver for user-level SCSI protocol drivers" #sr # block-major-11 sr # "SCSI CD-ROM protocol" #st # char-major-10 st # "SCSI tape protocol" #not currently used #sym53c416 # scsi_hostadapter # "sym53c416" # needed for sparc sym53c8xx scsi_hostadapter "Symbios 53C896" t128 scsi_hostadapter "Trantor T128/T128F/T228" tmscsim scsi_hostadapter "Tekram DC-390(T) PCI" u14-34f scsi_hostadapter "UltraStor 14F/34F (not 24F)" ultrastor scsi_hostadapter "UltraStor 14F/24F/34F" #wd33c93 # scsi_hostadapter # "Amiga A2091/590" wd7000 scsi_hostadapter "WD7000 series" # drivers/cdrom aztcd block-major-29 cdrom "Aztech CD268 CDROM" aztcd "Base I/O Address" cdu31a block-major-15 cdrom "Sony CDU-31A CDROM" cdu31a_port "Base I/O Address" cdu31a_irq "IRQ" cm206 block-major-32 cdrom "Philips/LMS cm20 CDROM" cm206 "Base I/O address, irq" gscd block-major-16 cdrom "GoldStar R420 CDROM" gscd "Base I/O Address" isp16 # module, but dynamic block number so kerneld can't request it... (?) unknown cdrom "ISP16/MAD16/Mozart soundcard-based CDROM" isp16_cdrom_base "Base I/O Address" isp16_cdrom_irq "IRQ" isp16_cdrom_dma "DMA Channel (0,3,5,6,7)" mcd block-major-23 cdrom "Mitsumi CDROM" mcd "Base I/O Address,irq" mcdx block-major-20 cdrom "Mitsumi XA/Multisession CDROM" mcdx "Base I/O Address,irq" optcd block-major-17 cdrom "Optics Storage 8000 AT CDROM" sbpcd block-major-25 cdrom "SoundBlaster Pro/Panasonic CDROM" sbpcd "Base I/O Address" sjcd block-major-18 cdrom "Sanyo CD-ROM device driver" sjcd_base "Base I/O Address" sonycd535 block-major-24 cdrom "Sony CDU-535 CDROM" sonycd535 "Base I/O Address" agpart video "Intel i810 Graphics Controller" catc eth "CATC EL1210A NetMate USB Ethernet driver" usbnet eth "USB CDC Ethernet driver" kaweth eth "KL5USB101 USB Ethernet driver" pegasus eth "Pegasus/Pegasus II USB Ethernet driver" 3c574_cs eth "3Com 3c574 series PCMCIA ethernet driver" aironet4500_cs eth "PCMCIA aironet4500_cs" 3c589_cs eth "3Com 3c589 series PCMCIA ethernet driver" axnet_cs eth "Asix AX88190 PCMCIA ethernet driver" xircom_tulip_cb eth "Xircom CBE-100 PCMCIA ethernet driver" fmvj18x_cs eth "PCMCIA fmvj18x_cs" ibmtr_cs eth "PCMCIA ibmtr_cs" netwave_cs eth "PCMCIA netwave_cs" nmclan_cs eth "New Media PCMCIA ethernet driver" ray_cs eth "Raylink/WebGear wireless LAN driver" wavelan_cs eth "PCMCIA wavelan_cs" xirc2ps_cs eth "Xircom PCMCIA ethernet driver" xircom_cb eth "Xircom Cardbus ethernet driver"